GPTN2115 GPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
High reliability operation DC power supply AC drives VOLTAGE UP TO 1600 V AVERAGE CURRENT 1150 A SURGE CURRENT 15 kA BLOCKING CHARACTERISTICS Characteristic Conditions VRRM Repetitive peak reverse voltage 1600 V VRSM Non-repetitive peak reverse voltage 1700 V VDRM Repetitive peak off-state voltage 1600 V IDRM Repetitive peak off-state current, max. VDRM, single phase, half wave, Tj = Tjmax 50 mA IRRM Repetitive peak reverse current, max. VRRM, single phase, half wave, Tj = Tjmax 50 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 1150 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, Th = 55 °C 1806 A ITSM Surge on-state current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 15 kA I²t I² t for fusing coordination 1125 kA²s VT(TO) Threshold voltage Tj = Tjmax 0.933 V rT On-state slope resistance Tj = Tjmax 0.302 mΩ VTM Peak on-state voltage, max On-state current IT = 1500 A , Tj = Tjmax 1.39 V IH Holding current, max Tj = 25 °C 300 mA IL Latching current, typ Tj = 25 °C 700 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 5 V 3.0 V IGT Gate trigger current Tj = 25 °C, VD = 5 V 250 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0.3 V PGM Peak gate power dissipation Pulse width 1 ms 150 W PG(AV) Average gate power dissipation 3W IFGM Peak gate current 10 A VFGM Peak gate voltage (forward) 12 V VRGM Peak gate voltage (reverse) 10 V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Non rep. - Tj = Tjmax 200 A/µs dV/dt Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs tq Turn-off time, typ Tj = Tjmax, IT = 2000 A, di/dt = -5 A/µs µs VR = 200 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0.030 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0.007 °C/W Tjmax Max operating junction temperature 125 °C Tstg Storage temperature -40 / 125 °C F Clamping force ± 5% 12 kN Mass 300 g Document GPTN2115T002 Value Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: info@gpsemi.it
PHASE CONTROLLED SCR GPTN2115 Document GPTN2115T002 Maximum surge current d.s. cooled 1 10 100 Number of cycle current pulses [n] ITSM [A] On-state voltage drop 500 1000 1500 2000 2500 0 0.5 1 1.5 2 V T [V] IT [A] Tj=Tjmax Current rating - sine wave 100 110 120 130 0 200 400 600 800 1000 1200 I T [A] Heatsink temperature [°C] 180°90° 120°60°30° Power loss - sine wave 500 1000 1500 2000 2500 0 200 400 600 800 1000 1200 I T[A] PF [W] 180° 120°90° 60° 30° In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. On-state voltage drop 500 1000 1500 2000 2500 0.5 1 1.5 2 2.5 3 VT [V] IT [A] Tj=Tjmax dimensions mm Thermal impedance (j-c) 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.001 0.01 0.1 1 10 100 Time [s] ZTH(j-c) [°C / W]