GPTK1155 GPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
High reliability operation DC power supply AC drives VOLTAGE UP TO 800 V AVERAGE CURRENT 1550 A SURGE CURRENT 12 kA BLOCKING CHARACTERISTICS Characteristic Conditions VRRM Repetitive peak reverse voltage 800 V VRSM Non-repetitive peak reverse voltage 900 V VDRM Repetitive peak off-state voltage 800 V IDRM Repetitive peak off-state current, max. VDRM, single phase, half wave, Tj = Tjmax 80 mA IRRM Repetitive peak reverse current, max. VRRM, single phase, half wave, Tj = Tjmax 80 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 1550 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, Th = 55 °C 2435 A ITSM Surge on-state current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 12 kA I²t I² t for fusing coordination 720 kA²s VT(TO) Threshold voltage Tj = Tjmax 0,925 V rT On-state slope resistance Tj = Tjmax 0,229 mΩ VTM Peak on-state voltage, max On-state current IT = 2800 A , Tj = Tjmax 1,57 V IH Holding current, max Tj = 25 °C 150 mA IL Latching current, typ Tj = 25 °C 300 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 5 V 2,5 V IGT Gate trigger current Tj = 25 °C, VD = 5 V 250 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0,15 V PGM Peak gate power dissipation Pulse width 0.5 ms 100 W PG(AV) Average gate power dissipation 5W IFGM Peak gate current 30 A VFGM Peak gate voltage (forward) 12 V VRGM Peak gate voltage (reverse) 3V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Tj = Tjmax 200 A/µs dV/dt Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs tq Turn-off time, typ µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0,033 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0,001 °C/W Tjmax Max operating junction temperature 150 °C Tstg Storage temperature -40 / 150 °C F Clamping force ± 10% 15 kN Mass 320 g Document GPTK1155T001 Value Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: info@gpsemi.it
PHASE CONTROLLED SCR GPTK1155 Document GPTK1155T001 Maximum surge current d.s. cooled 1 10 100 Number of cycle current pulses [n] ITSM [A] On-state voltage drop 500 1000 1500 2000 2500 3000 3500 0 0,5 1 1,5 2 VT [V] IT [A] Tj=Tjmax Thermal impedance (j-c) 0,005 0,01 0,015 0,02 0,025 0,03 0,035 0,001 0,01 0,1 1 10 100 Time [s] ZTH(j-c) [°C / W] Current rating - sine wave 110 130 150 170 0 400 800 1200 1600 IT [A] Heatsink temperature [°C] 180°90° 120°60°30° Power loss - sine wave 500 1000 1500 2000 2500 3000 0 400 800 1200 1600 IT[A] PF [W] 180° 120° 90° 60° 30° In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. On-state voltage drop 500 1000 1500 2000 2500 3000 3500 0 0,5 1 1,5 2 VT [V] IT [A] Tj=Tjmax dimensions mm