GPTG2044 GPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
High reliability operation DC power supply AC drives VOLTAGE UP TO 1600 V AVERAGE CURRENT 440 A SURGE CURRENT 5,5 kA BLOCKING CHARACTERISTICS Characteristic Conditions VRRM Repetitive peak reverse voltage 1600 V VRSM Non-repetitive peak reverse voltage 1700 V VDRM Repetitive peak off-state voltage 1600 V IDRM Repetitive peak off-state current, max. VDRM, single phase, half wave, Tj = Tjmax 30 mA IRRM Repetitive peak reverse current, max. VRRM, single phase, half wave, Tj = Tjmax 30 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 440 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, Th = 55 °C 691 A ITSM Surge on-state current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 5,5 kA I²t I² t for fusing coordination 151 kA²s VT(TO) Threshold voltage Tj = Tjmax 1,0 V rT On-state slope resistance Tj = Tjmax 0,8 mΩ VTM Peak on-state voltage, max On-state current IT = 1000 A , Tj = Tjmax 1,75 V IH Holding current, max Tj = 25 °C 600 mA IL Latching current, typ Tj = 25 °C 1000 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 5 V 3,5 V IGT Gate trigger current Tj = 25 °C, VD = 5 V 150 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0,25 V PGM Peak gate power dissipation Pulse width 0.5 ms 10 W PG(AV) Average gate power dissipation 2W IFGM Peak gate current 3A VFGM Peak gate voltage (forward) 20 V VRGM Peak gate voltage (reverse) 5V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Repetitive - Tj = Tjmax 200 A/µs dV/dt Critical rate of rise of off-state voltage Tj = Tjmax 500 V/µs tq Turn-off time, typ Tj = Tjmax, IT = 320 A, di/dt = -12.5 A/µs µs VR = 100 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0,063 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0,020 °C/W Tjmax Max operating junction temperature 125 °C Tstg Storage temperature -40 / 125 °C F Clamping force 4,5 kN Mass 70 g Document GPTG2044T001 Value Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: info@gpsemi.it
PHASE CONTROLLED SCR GPTG2044 Document GPTG2044T001 Maximum surge current d.s. cooled 1 10 100 Number of cycle current pulses [n] ITSM [A] On-state voltage drop 200 400 600 800 1000 0 0,5 1 1,5 2 VT [V] IT [A] Tj=Tjma Thermal impedance (j-c) 0,01 0,02 0,03 0,04 0,05 0,06 0,07 0,001 0,01 0,1 1 10 100 Time [s] ZTH(j-c) [°C / W] Current rating - sine wave 100 110 120 130 0 100 200 300 400 IT [A] Heatsink temperature [°C] 180°90° 120°60°30° Power loss - sine wave 100 200 300 400 500 600 700 800 900 0 100 200 300 400 IT[A] PF [W] 180° 120° 90° 60° 30° In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. On-state voltage drop 100 200 300 400 500 600 700 800 900 1000 0 0,5 1 1,5 2 VT [V] IT [A] Tj=Tjma