GP565

GP565 TRIQUINT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

RF4CE Communications Controller for Remote Control Product Brief GP_P007_PB_06535 V2.00 | Subject to change without notice 1 of 3 www.qorvo.com Product Overview The GP565 System-on-Chip provides a fully integrated solution for a Remote Control operating according to a standard or vendor -specific RF4CE profile using ultra low power wireless communications. It is compliant with the IEEE Standard 802.15.4, providing robust sp read spectrum data communication with a secure encrypted data flow. Its antenna diversity offers additional robustness in a crowded wireless 2.4 GHz environment. The GP565 features a radio transceiver, integrated real -time Medium Access Control processor, integrated microcontroller, RAM and Flash memory, security engine, event scheduler, and an extensive set of peripherals including a keyboard scanner and an IR signal generator. The integrated RF filtering simplifies the RF design complexity enabling very low cost single layer applications using simple PCB antennas requiring no shielding and a minimum number of external components. Advanced power management features ensure that power consumption is minimized in active as well as in standby states, enablin g maintenance free and very small form factor products. The internal microcontroller of the GP565 can drive the RF remote control interface, including dual mode operation with IR remote control, and can communicate with external devices via SPI, I2C and UART interfaces. Chip Overview

2.4 GHz

IEEE 802.15.4 Radio AES-CCM* Security Engine I2C Master Keyboard Scanner SPI Slave IR Generator Watchdog Packet Input / Output

32 MHz

120, 192 or 248 KB Flash 16/32-bit MCU Battery Monitor Power Management G P I O PWM Engine IEEE 802.15.4 Real-Time MAC SPI Master

32 KiHz

(optional) Timing & Control ADC Ant.2 Ant.1 UART

RF4CE Communications Controller for Remote Control GP_P007_PB_06535 V2.00 | Subject to change without notice 2 of 3 www.qorvo.com Key Features  IEEE 802.15.4 compliant PHY and Real-Time MAC  Operates in the worldwide 2.4 GHz ISM-band  Excellent range by antenna diversity: 8 dB more reliable link budget compared to single antenna  Additional robustness by packet-in-packet resynchronization  Hardware accelerated AES and CCM* encryption with 128, 192 and 256-bit keys  XAP5™ 16/32-bits high performance microcontroller  120 or 192 or 248 Kbyte Flash Program memory  8 or 16 Kbyte Low Leakage Retention RAM  Integrated ZigBee RF4CE Network layer  Integrated standard or vendor-specific RF4CE Profile for controller node  Extremely low standby power consumption  Supporting intermitted energy sources and coin cell batteries  4 LED generator with individual PWM support  Full internal IO pull-up / pull-down support during active and standby states Low Cost The GP565 is designed to operate on very low cost, single layer, paper phenol like PCB material using only low cost components and printed circuit antennas. No expensive shielding, chip antennas or voltage regulators are required to design a high performance Remote Control application. The integrated microcontroller and program memory allow for fully integrated, single chip applications and the integrated Real-Time MAC greatly reduces software complexity and improves stability. Excellent Range and Reliability The GP565 has been optimized for reliable communication in harsh radio environments. The -96 dBm receiver sensi tivity allows extended coverage. Built -in antenna diversity with two antennas improves the reliable link budget by 8 dB resulting in approximately twice the reliable range compared to similar systems with only one antenna. In high density networks the packet-in-packet resynchronization further improve s the communication reliability. Ultra-Low Power Consumption The GP565’s advanced integrated energy management system allows it to operate from a standard lithium coin cell battery, like the CR2032, as well a s from intermittent power supplies like photovoltaic (solar) and electro-mechanical, with a minimum of additional components. It includes ultra-low power voltage level detectors and overvoltage protection circuitry, allowing safe operation and graceful shu tdown. The battery lifetime monitor tracks the usage of the battery and provides an early exhaustion warning.

Electrical Characteristics

Using internal RC oscillator 1 µA Using crystal oscillator 720 µA Operational Currents 1 Receive 12.5 mA Transmit (at 0 dBm) 18 mA Transmit (at 7 dBm) 29 mA Supply Voltage 1.8 to 3.6 V Interfaces and Peripherals Programmable GPIO lines 22 Analog input lines 2 Keyboard (HW assisted) max 8 x 8 20 mA output drive GPIO (for IR) 1 8-bit PWM with fading support (for LED) 4 outputs 16-bit PWM engine 4 outputs SPI Master and I2C Master peripheral interfaces SPI Slave interface UART interface ADC to monitor the analog input lines and the power supply level High speed programming interface Crystal Frequency 32.000 MHz (±40 ppm) Radio Characteristics Standards compliant IEEE 802.15.4-2003 IEEE 802.15.4-2006 Radio Regulations compliant ETSI EN 300 328 FCC CFR-47 Part 15 ARIB STD-T66 Frequency Band 2400 – 2483.5 MHz Channels 16 (programmable, 5 MHz steps) Modulation IEEE 802.15.4 Chip rate 2 Mchip/s Data Rate 250 kbit/s Receiver Sensitivity 1 -96 dBm typical Antenna diversity gain 2 8 dB (increases the 'effective' receiver sensitivity to -104 dBm) Transmit Power +7 dBm (adjustable down in 1 dB steps) Radio Management Antenna Diversity Digital RSSI Link Quality Indication

RF4CE Communications Controller for Remote Control GP_P007_PB_06535 V2.00 | Subject to change without notice 3 of 3 www.qorvo.com General Characteristics Operating Temperature -40 to +85 °C (industrial) Storage Temperature -50 to +150 °C Soldering Temperature 260 °C (10 s max) Compliance RoHS 1) Typical, at 3.0 V and 25 °C, unless specified otherwise. 2) For typical indoor usage in an environment with 50 ns delay spread and 2 MHz signal bandwidth using the Rayleigh fading model: antenna diversity with 2 antennas results in a 8 dB improved link budget at a 1% outage probability compared to no antenna diversity. The 8 dB in link budget translates into 70% more range, if using a two slope range model with the breakpoint at 10 m and g1 = 2, g2 = 3.5. Reference Designs, Tools and SW Qorvo reference designs, development kits, software libraries and production platforms provide a quick time -to-market solution for sensor and control devices for Smart Home networks and for RF4CE/BLE Remote Control products. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: lpw.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to chang e without notice. Customers should obt ain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intell ectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTI ES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the genera lity of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life -saving, or life -sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injur y or death. Copyright 2017 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc .