DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

CATV GaN Power Doubler Hybrid Datasheet: Rev. E 04-03-15 - 1 of 4 - Disclaimer: Subject to change without notice © 2015 TriQuint Semiconductor, Inc www.triquint.com / www.qorvo.com RFMD + TriQuint = Qorvo SOT-115 Hybrid Module

Applications

 HFC Nodes  CATV Line Amplifiers  Head End Equipment Functional Block Diagram INPUT OUTPUT VDD Product Features  Excellent High Output Linearity  High Gain 24 dB at 1000 MHz  50 – 1000 MHz Bandwidth  Ultra-Low CSO/CTB/XMOD  Low Noise  Excellent Input/Output Match  SOT-115J Packaging  High Reliability  +24 V, 445 mA General Description The TAT 8888 is an ultra -linear, packaged GaAs/GaN amplifier intended for output stage amplification in CATV infrastructure applications. The TAT 8888 features a push -pull cascode design which provides flat gain along with ultra -low distortion, making it ideal for use in CATV distribution systems requiring high output power capability. The TAT8888 draws 44 5 mA from a +24 V supply and exceeds the output linearity performance of traditional GaAs-based amplifiers. The TAT8888 is packaged in an industry standard 7-pin SOT-115J module. Pin Configuration Pin No. Label

1 RF Input 75 Ohm

2 – 3 GND 5 +24 V Supply 7 – 8 GND

9 RF Output 75 Ohm

Ordering Information

Part No. Description TAT8888 CATV GaN Power Doubler Hybrid TAT8888

CATV GaN Power Doubler Hybrid Datasheet: Rev. E 04-03-15 - 2 of 4 - Disclaimer: Subject to change without notice © 2015 TriQuint Semiconductor, Inc www.triquint.com / www.qorvo.com RFMD + TriQuint = Qorvo Recommended Operating Conditions Parameter Min Typ Max Units Supply Voltage (VDD) 24 V Case Temperature −30 +100 °C Tj for >106 hours MTTF 160 °C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Absolute Maximum Ratings Parameter Rating Storage Temperature −40 to +100 °C RF Input Power, CW, 75 Ω, T=+25 °C +70 dBmV Supply Voltage (VDD) +30 V Supply Current (IDD) 600 mA Operation of this device outside the parameter ranges given above may cause permanent damage. Typical Performance Test conditions unless otherwise noted: VDD=+24 V, 75 Ω System, Base Temp.=+35 °C. Parameter Conditions Min Typ Max Units Operating Frequency 50 1000 MHz Gain f = 1000 MHz 23 24.5 dB Gain Slope 50 to 1000 MHz 0.25 1.5 dB Gain Flatness Relative to Slope Line ±0.5 ±0.8 dB Input Return Loss 50 MHz to <550 MHz 18 dB >550 MHz to 1000 MHz 16 dB Output Return Loss 50 MHz to 1000 MHz 18 dB CSO 79 channels NTSC 75 channels QAM, -6 dB offset, +61 dBmV virtual output, 18 dB Tilt −69 −65 dBc CTB −75 −69 dBc XMOD −65 dBc CCN 55 58 dB Output IP3 Pout= +19 dBm/tone, at 500 MHz Δf = 6 MHz +53 dBm Noise Figure 3.5 dB Supply Current, IDD 445 460 mA Thermal Resistance, θjc Junction to case 5 °C/W

CATV GaN Power Doubler Hybrid Datasheet: Rev. E 04-03-15 - 3 of 4 - Disclaimer: Subject to change without notice © 2015 TriQuint Semiconductor, Inc www.triquint.com / www.qorvo.com RFMD + TriQuint = Qorvo Mechanical Specifications

CATV GaN Power Doubler Hybrid Datasheet: Rev. E 04-03-15 - 4 of 4 - Disclaimer: Subject to change without notice © 2015 TriQuint Semiconductor, Inc www.triquint.com / www.qorvo.com RFMD + TriQuint = Qorvo Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.triquint.com Tel: 877-800-8584 Email: customer.support@qorvo.com For information about the merger of RFMD and TriQuint as Qorvo: Web: www.qorvo.com For technical questions and application information: Email: sjcapplications.engineering@qorvo.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no respon sibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and w ith all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life -saving, or life - sustaining applications, or other applications where a failure would reasonably be expecte d to cause severe personal injury or death.