GMX120-3

GMX120-3 BELIMO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Power Supply 100...240 VAC, -15% / +10%, 50/60 Hz Power consumption in operation 4 W Power consumption in rest position 2 W Transformer sizing 7 VA (class 2 power source) Shaft Diameter 1/2...1.05” round, centers on 1/2” and 3/4” with insert, 1.05” without insert Electrical Connection 18 GA appliance cable, 3ft [1m] 10ft [3m] and 16ft [5m], with 1/2” conduit connector, degree of protection NEMA 2 / IP54 Overload Protection electronic throughout 0...95° rotation Input Impedance 600 Ω Angle of rotation Max. 95°, adjustable with mechanical stop Torque motor 360 in-lb [40 Nm] Direction of motion motor selectable with switch 0/1 Position indication Mechanically, 30...65 mm stroke Manual override external push button Running Time (Motor) 150 s, constant, independent of load Ambient humidity max. 95% r.H., non-condensing Degree of Protection IP54, NEMA 2, UL Enclosure Type 2 Housing material UL94-5VA Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU Noise level, motor 45 dB(A) Servicing maintenance-free Quality Standard ISO 9001 Weight 2.7 lb [1.2 kg] †Rated Impulse Voltage 800V, Type action 1, Control Pollution Degree 3. Torque min. 360 in-lb, for control of damper surfaces up to 90 sq. ft. Application For on/off and floating point control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft up to 1.05” in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. Operation The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The GMX series provides 95° of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The GMX120-3 actuators use a sensorless brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions. Dimensions (Inches[mm]) 2.9” [72.9] 4.55” [115.6] 7.02” [178.4] 5.37” [136.4] 1.42” [36] To center of mounting slot. GMX120-3 Technical Data Sheet On/Off, Floating Point, Non-Spring Return, AC 100...240 V 800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN Date created, 02/10/2020 - Subject to change. © Belimo Aircontrols (USA), Inc.

K-GM20 Standard GK/GM clamp (1/2” to 1.05”). SH10 Push rod for KG10A ball joint (36” L, 3/8” diameter). SH8 Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter). TF-CC US Cable conduit connector, 1/2”. TOOL-07 13 mm wrench. ZG-100 Univ. right angle bracket 17”x11-1/8”x6” (HxWxbase). ZG-101 Univ. right angle bracket 13x11x7-7/16” (HxWxbase). ZG-102 Dual actuator mounting bracket. ZG-103 Univ. right angle bracket 7-1/2x11x2-3/4” (HxWxbase). ZG-104 Univ. right angle bracket 13-5/8x7-1/2x4” (HxWxbase). ZG-109 Right angle bracket for ZS-260. ZG-110 Stand-off bracket for ZS-260. ZG-DC1 Damper clip for damper blade, 3.5” width. ZG-DC2 Damper clip for damper blade, 6” width. ZG-GMA Mounting kit for linkage operation Z-GMA Base plate extension ZK1-GEN Connection cable ZK2-GEN Connection cable ZS-100 Weather shield - galvaneal 13x8x6” (LxWxD). ZS-101 Base plate for ZS-100. ZS-150 Weather shield - PC w/ foam seal 16x8-3/8x4” (LxWxD). ZS-260 Explosion proof housing. ZS-300 NEMA 4X, 304 stainless steel enclosure. ZS-300-5 NEMA 4X, 316L stainless steel enclosure. ZS-300-C1 1/2” shaft adaptor, standard wtih ZS-300(-5). ZS-300-C2 3/4” shaft adaptor for ZS-300(-5). ZS-300-C3 1” shaft adaptor for ZS-300(-5). MFT-P Belimo PC-Tool IRM-100 Input rescaling module for modulating actuators. NSV24 US Battery back-up module for non-spring return actuators. P10000A GR Feedback potentiometer for damper actuators and rotary actuators P1000A GR Feedback potentiometer for damper actuators and rotary actuators P140A GR Feedback potentiometer for damper actuators and rotary actuators P2800A GR Feedback potentiometer for damper actuators and rotary actuators P5000A GR Feedback potentiometer for damper actuators and rotary actuators P500A GR Feedback potentiometer for damper actuators and rotary actuators PS-100 Low voltage and control signal simulator. PTA-250 Pulse width modulation interface for modulating actuators. S1A Auxiliary switch for damper actuators and rotary actuators S2A Auxiliary switch for damper actuators and rotary actuators SGA24 Positioners suitable for use with the modulating damper UK24LON Gateway MP to LonWorks ZG-R03 MFT95 resistor kit for 0 to 135Ω control applications. ZG-SGF Mounting plate for SGF. ZG-X40 120 to 24 VAC, 40 VA transformer. ZIP-RS232 US PC Tool computer programming interface, serial port. MFT-P Belimo PC-Tool NSV-BAT 12V 1.2AH battery (two required for NSV24 US). Blu (1) Common Brn (2) Load Wht (3) Load N L Line Wht Volts Blk A 1 11 On/Off 100 to 240 VAC Blu (1) Common Brn (2) Load Wht (3) Load Wht N Blk L Line Volts A 1 11 Floating Point 100 to 240 VAC GMX120-3 Technical Data Sheet On/Off, Floating Point, Non-Spring Return, AC 100...240 V 800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN Date created, 02/10/2020 - Subject to change. © Belimo Aircontrols (USA), Inc.

Floating point, on/off control damper actuators shall be electronic direct- coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft up to 1.05” diameter. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. If required, actuators will be provided with a screw terminal strip for electrical connections (NMX24-3-T). Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo. Wiring Diagrams A Actuators with appliance cables are numbered. Provide overload protection and disconnect as required. Actuators may be connected in parallel if not mechanically linked. Power consumption and input impedance must be observed. GMX120-3 Technical Data Sheet On/Off, Floating Point, Non-Spring Return, AC 100...240 V 800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN Date created, 02/10/2020 - Subject to change. © Belimo Aircontrols (USA), Inc.