GH04P21A2GE SHARP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
No. LH07309 SHARP CORPORATION ELECTRONIC COMPONENTS GROUP This technical literature is subject to change without notice. MODEL No. GH04P21A2GE
30 March 2007
SPEC.No. No. LH07309 PAGE 1/3 Product name : LASER DIODE Model No. : GH04P21A2GE 1. These specification sheets include materials protected under the copyright of Sharp Corporation ("Sharp"). Please do not reproduce or cause anyone to reproduce them without Sharp's consent. 2. When using this product, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets, as well as the precautions mentioned below. Sharp assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets, and the precautions mentioned below. (Precautions) (1) This products is designed for use in the following application areas; * OA equipment * Audio visual equipment * Home appliance * Telecommunication equipment (Terminal) * Measuring equipmen t * Tooling machines * Computers If the use of the product in the above application areas is for equipment listed in paragraphs (2) or (3), please be sure to observe the precautions given in those respective paragraphs. (2) Appropriate measures, such as fail-safe design and redundant design considering the safety design of the overall system and equipment, should be taken to ensure reliability and safety when this product is used for equipment which demands high reliability and safety in function and precision, such as ; * Transportation control and safety equipment (aircraft, train, automobile etc.) * Traffic signals * Gas leakage sensor breakers * Rescue and security equipment * Other safety equipment (3) Please do not use this product for equipment which require extremely high reliability and safety in function and precision, such as ; * Space equipment * Telecommunication equipment (for trunk lines) * Nuclear power control equipment * Medical equipment (4) Please contact and consult with a Sharp sales representative if there are any questions regarding interpretation of the above three paragraphs. 3. Please contact and consult with a Sharp sales representative for any questions about this product.
MODEL No. PAGE GH04P21A2GE Outline dimensions and Terminal connections No. LH07309 Note 4) Mass of the product : 0.31g (reference value) Marking Position : side of a cap Printed contents : TBD Note 1) Dimension of the bottom of leads. Note 2) These dimensions are valid only in the range of 0 \` 0.6mm below from the reference plane. Note 3) These dimensions are defined from the imaginary circle which goes through the three points around the stem to the bottom of cut off parts. Note 4) Please don't connect the lead pin No.2 to the driving circuit. GENERAL TOLERANCES ±ODQ UNIT:mm No. Component Material Finish Window glass Borosilicated glass - Lead pins Kovar Gold-plated Stem Fe,Cu Gold-plated Cap Kovar Nickel-plated @ Laser Diode Chip InAlGaN - Пøõ÷ĔĐĕõ Пúõüüʶ÷õø ПûõûĔĈğõ Пüõýò÷ çççççô÷õ÷ùü ĕĶĻĬùð ÷õùüʶ÷õ÷ú ÷õüĔĐĕõ ġ øõùþ ʶ÷õ÷ÿ ùõúʶ÷õü ÷õüĔĈğõ ýõüʶ÷õü øõùʶ÷õø øóçúù ПøõùĔĈğõ Ċçç÷õøĔĈğõ ÷õýĔĐĕ õ ÷õøĔĈğ õ úôП÷õûüʶ÷õø ᶅ ᶆ ᶃ ᶇ ᶄ ÷õûʶ÷õø ÷õûʶ÷õø ĕĶĻĬøð Пù øʶ÷õøü ĕĶĻĬùʣɹĀ÷˃ʶù ĕĶĻĬùð ø ù ú ğ Ġ ČĴİĺĺİĶĵçķĶİĵĻ ĕĶĻĬúð ÷ʶ÷õ÷ÿ ÷ʶ÷õ÷ÿ ČĴİĺĺİĶĵçķĶİĵĻ ĊĬĵĻĬĹçĶĭçĻįĬçİĴĨĮİĵĨĹŀçĪİĹĪijĬ ľįİĪįçĮĶĬĺçĻįĹĶļĮįçĻįĬçĻįĹĬĬ ķĶİĵĻçĨĹĶļĵīçĻįĬçĺĻĬĴ ČĵijĨĹĮĬīçīĹĨľİĵĮ ĨĹĶļĵīçĻįĬçĬĴİĺĺİĶĵçķĶİĵĻ ğ Ġ ùççĚĻĬĴ ú çççççø ēĨĺĬĹçċİĶīĬ ěĬĹĴİĵĨij ĪĶĵĵĬĪĻİĶĵĺ ęČčČęČĕĊČçėēĈĕČ
No. LH07309 GH04P21A2GE 3/3 ĔĖċČēçĕĶõ ėĈĎČ Ratings and characteristics Absolute Maximum Ratings (Tc=25(Note 1)) Optical power output(CW) (Note 2) Optical power output(Pulse) (Note 3) Reverse voltage Laser diode Operatings temperature CW (Note 2) (case temp.) Pulse (Note3) Storage temperature(case temp.) Soldering temperature (Note 4) (Note 1) Tc :Case temperature (Note 2) CW :Continuous Wave Operation (Note 3) Pulse :Pulse Operation(Pulse Width 50ns Duty:50%) (Note 4) Soldering position is 1.6mm apart from bottom edge of the case.(Immersion time: 3s) Electro-optical Characteristics (Note 1) (Tc=25 (Note 2) ) Threshold current Ith 40 mA Operating current Iop 110 mA Operating voltage Vop 5.4 V Wavelength Ép Po=105mW 406 nm Æa 9 ÆÛ 19 Æa 8.5 ÆÛ Po=5mW 19 Åd 1.5 mW/mA K-LI - % (Note 1) Initial value, Continuous Wave Operation. (Note 6) Definition of Kink (Note 2) Tc : Case temperature Kink : K-LI=(P4-P3)/P3 (Note 3) Angle of 50% peak intensity.(Full angle at half-maximum) (Note 4) Paralel to the junction plane.(X-Z plane) Perpendicular to the junction plane.(Y-Z plane) (Note 5) Pulse :Pulse Operation(Pulse Width 50ns Duty:50%) 11.5 -2.5 2.5 SymbolParameter Vrl Po Pp typ maxunit Topc(c) -10\+70 Topp(c) -10\+70 6.5 400 415 -6 0 150 Parameter Symbol Conditions min Ratings 105 unit mW mW V 210 Tsld 300 Tstg -40\`+85 Emission point accuracy Angle (Note 4) -3 Radiation Characte- ristics Angle (Note 3) (Note 4) 5.5 Radiation Characte- ristics Angle (Note 3) (Note 4) Kink (Note 5, Note 6) P1=42mW P2=126mW P3=210mW -10 10 Differential efficiecy 95mW I(105mW)-I(10mW)1.1 - Ith Ip1 Ip2 If Least squares linear fit between P1 and P2 Ip3 real I-L Data Po