G215B-C BELIMO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Technical data sheet G215B-C www.belimo.com G215B-C • en-us • 2020-10-08 • Subject to change 1 / 4 Type overview Type DN ANSI Class G215B-C 15 250 Technical data Functional data Fluid chilled or hot water, up to 60% glycol, steam Body Pressure Rating ANSI Class 250, up to 400 psi below 150°F Servicing repack kits available Rangeability Sv 100:1 Max Differential Pressure (Steam) 20 psi [103 kPa] Flow Pattern 2-way Leakage rate ANSI Class VI Controllable flow range stem up - open A – AB Cv 0.4 Maximum Inlet Pressure (Steam) 35 psi [241 kPa] ANSI Class 250 Body pressure rating note up to 400 psi below 150°F Valve Size 0.5" [15] Materials Valve plug brass Seat Bronze End fitting NPT female ends Safety notes WARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov Product features This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include unit ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in hydronic systems with variable flow. Bronze and stainless steel trim valves can be used for steam applications, depending on actuator and close-off combinations. Application
Technical data sheet G215B-C www.belimo.com G215B-C • en-us • 2020-10-08 • Subject to change 2 / 4 The valves should be mounted in a weather-protected area in a location that is within the ambient limits of the actuator. Allow sufficient room for valve with actuator and for service. The G2 and G3 preferred mounting position of the valve is with the valve stem vertical above the valve body, for maximum life. However, the assemblies can be mounted with the valve stem vertical or horizontal in relation to the pipe. The actuators should never be mounted underneath the valve, as condensation can build up and result in a failure of the actuators. Flow/Mounting details Piping
Technical data sheet G215B-C www.belimo.com G215B-C • en-us • 2020-10-08 • Subject to change 3 / 4 Dimensions Dimensional drawings LF A B C D E F LV A B C D E F
Technical data sheet G215B-C www.belimo.com G215B-C • en-us • 2020-10-08 • Subject to change 4 / 4 LVK A B C D E F