DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 30
Technical content
Datasheet sections
- 2.1 Display Characteristics
- 2.2 Optical Characteristics
- 4.1 Absolute Ratings of TFT LCD Module
- 4.2 Absolute Ratings of Backlight Unit
- 4.3 Absolute Ratings of Environment
- 5.1 TFT LCD Module
- 5.2 Backlight Unit
- 6.1 Pixel Format Image
- 6.2 The Input Data Format
- 6.4 Interface Timing
- 6.5 Power ON/OFF Sequence
- 7.1 TFT LCD Module
- 7.2 Backlight Unit
- 9.1 Shipping Label
- 9.2 Packaging
Avnet Embedded. With you every step of the way. www.avnet-embedded.eu DAtAshEEt If you require a touch panel solution. For information on touch sensors, sensor driving and touch panel bonding solutions, scan the QR code or click the URL www.avnet-embedded.eu/products/displays/.html G190EAN01.0 Date: May 2013
document version 0.3 G190EAN01.0 ■■ Preliminary Specification □□□□ Final Specification Module 19 .0” SXGA Color TFT-LCD Model Name G190EAN01.0 Customer D ate Approved by Note: This Specification is subject to c hange without notice. Checked & Approved by D ate V ito Huang 5/ 9, 2013 Prepared by Ginger Lin 5 / 9, 2012 Audio-Video Business Unit / AU Optronics corporation www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Record of Revision Version & Date Page Old Description New Description 0.1 2012/05/29 All Frist Edition for Customer
4 Add “Handling Precautions Item 13)”
Optical ResponseTime [msec]: T BD (Typ, on/off) Optical ResponseTime [msec]: 25 (Typ, on/off) Power Consumption[Watt]: LED: 17.28 (W) + LVDS: 4.7 (W) Power Consumption [Watt]: LED: 14.4 (W) + LVDS: 3.5 (W) (typ) Optical ResponseTime [msec]: TBD Optical ResponseTime [msec] : Rising: Typ.13; Max. 18 Falling: Typ.12; Max. 17 Rising + Falling: Typ.25; Max.35 Color/ Chromaticity Coordinates: TBD Update Color/ Chromaticity Coordinates Contrast Ratio Min. 800 Contrast Ratio Min. 700 Flicker [dB]: Max. -20dB D elete
9 Note 7: Subchecker Pattern D elete
ICC: Typ. 0.94; Max. 1.1; Condition: Vin=5V, All Black Pattern, at 60Hz I CC: Typ. 0.7; Max. 0.9; Condition: Vin=5V, 2dot checker Pattern, at 60Hz PCC: Typ. 4.7; Max. 5.5; Condition: V in=5V, All Black Pattern, at 60Hz PCC: Typ. 3.5; Max. 4.5; Condition: Vin=5V, 2dot checker Pattern, at 60Hz N ote 1: The H-Stripe pattern Note 1: The 2dot checker Pattern Irush LED:T
25 Add Note 3
0.2 2012/11/8 7~28 Update Drawing 15 Add “Analog control voltage: 0~3.3V” Add “Note 6” 22 Update Power Sequence Timing chart 0.3 2013/5/9
4 Pin 9 “Dimming“ Update “Dimming (or Analog Control
Voltage 0~ 3.3V)” www.avnet-embedded.eu
document version 0.3 G190EAN01.0 1. Handling Precautions Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open or modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of LED light bar edge. Instead, press at the far ends of LED light bar edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. 12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Avoid stressing front bezel position when doing mechanical design. www.avnet-embedded.eu
document version 0.3 G190EAN01.0 2. General Description G190EAN01.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a driver circuit, and a backlight system. The screen format is intended to support the SXGA (1280(H) x 1024(V)) screen and 16.7M colors. All input signals are 2-channel LVDS interface compatible.
2.1 Display Characteristics
The following items are characteristics summary on th e table under 25 oC condition: Items Unit Specifications Screen Diagonal [mm] 482.6 (19.0" ) Active Area [mm] 376.32 (H) x 301.06 (V) Pixels H x V 1280(x3) x 1024 Pixel Pitch [mm] 0.294 (per one triad) x 0.294 Pixel Arrangement R.G.B. Vertical Stripe Display Mode Normally Black White Luminance [cd/m2] 300 (center, Typ) @ 80mA Contrast Ratio 1000 : 1 (Typ) Optical ResponseTime [msec] 25 (Typ, on/off) Nominal Input Voltage VDD [Volt] +5.0 V Power Consumption [Watt] LED: 14.4 (W) + LVDS: 3.5 (W) (typ) Weight [Grams] 1600 (TYP) Physical Size (H x V x D) [mm] 396 (H) x 324 (V) x 17.0 (D) (Typ) Electrical Interface Dual channel LVDS Surface Treatment Anti-Glare treatment Support Color 16.7M colors Temperature Range Operating Storage (Non-Operating) [oC] [oC] 0 to +50 -20 to +60 RoHS Compliance RoHS Compliance www.avnet-embedded.eu
document version 0.3 G190EAN01.0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature): Item Unit Conditions Min. Typ. Max. Note Horizontal (Right) CR = 10 (Left) 89 - Viewing Angle [degree] Vertical (Up) CR = 10 (Down) 89 - Luminance Uniformity [%] 9 Points 75 80 - 2, 3 Rising - 13 18 Falling - 12 17 Optical Response Time [msec] Rising + Falling -- 25 35 4, 6 Red x 0.601 0.651 0.701 Red y 0.292 0.342 0.392 Green x 0.269 0.319 0.369 Green y 0.567 0.617 0.667 Blue x 0.095 0.145 0.195 Blue y 0.010 0.060 0.110 White x 0.263 0.313 0.363 Color / Chromaticity Coordinates (CIE) White y 0.279 0.329 0.379 White Luminance (At LED= 80mA) [cd/m 2 ] 240 300 - 4 Contrast Ratio 700 1000 - 4 Cross Talk (At 60Hz) [%] - - 1.5 5 www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Note 1: Definition of viewing angle, measured by ELDIM (EZContrast 88) Viewing angle is the measurement of contrast ratio≧10, at the screen center, over a 180° horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. Note 2: 9 points position N ote 3: The luminance uniformity of 9 points is defined by dividing the maximum luminance values by the minimum test point luminance. And measured by TOPCON SR-3 Minimum Luminance of 9 points δW9 = M aximum Luminan ce of 9 points 50 % 90 % 90 % 50 % 10 % 10 % www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Note 4: Measurement method The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temp erature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and dark room. Note 5: Definition of Cross Talk (CT) and measured by TOPCON SR-3 CT = | YB – YA | / YA × 100 (%) Where YA = Luminance of measured location without gray level 0 pattern (cd/m2) YB = Luminance of measured location with gray level 0 pattern (cd/m2) Center of the screen TFT -LCD Module 50 cm Photo detector LCD Panel Field=2° www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Note 6: Definition of response time, measured by WESTAR TRD-100A The output signals of photo detector are measured when the input signals are changed from “Full Black” t o “Full White” (rising time), and from “Full White” to “Full Black” (falling time), respectively. The response time is interval between the 10% and 90% of amplitudes. Please refer to the figure as below. 100 Optical response White Black White Tr F Tr R 100 Optical response White Black White Tr F Tr R www.avnet-embedded.eu
document version 0.3 G190EAN01.0 3. Functional Block Diagram T he following diagram shows the functional block of the 19.0 inches Color TFT-LCD Module: I/F PCB Interface: FI-XB30SSL-HF15 / MSBKT2407P30HB Mating T ype: FI-X30HL (Locked Type) FI-X30H (Unlocked Type) LED B/L Connector DC/DC Converter (Integrate level shift) LVDS Receiver Timing Controller Gamma Correction TFT-LCD 1280*(3)*1024 Pixels X -Driver IC G1024 D1 D3840 LED driver DC POWER ASIC RSDS Transmitter LVDS + 5V www.avnet-embedded.eu
document version 0.3 G190EAN01.0 4. Absolute Maximum Ratings Absolute maximum ratings of the module are as following:
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min. Max. Unit Conditions Logic/LCD Drive Voltage VDD -0.3 +5.5 [Volt] Note 1, 2
4.2 Absolute Ratings of Backlight Unit
Item Symbol Min. Max. Unit Conditions LED Power Current Iled - 1.7 [A] rms Note 1, 2
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions Operating Temperature TOP 0 +50 [oC] Operation Humidity HOP 5 90 [%RH] Storage Temperature TST -20 +60 [oC] Storage Humidity HST 5 90 [%RH] Note 3 & 4 www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Note 1: With in Ta= 25℃ Note 2: Permanent damage to the device may occur if exceed maximum values Note 3: For quality performance, please refer to AUO IIS (Incoming Inspection Standard). Operating Range Storage Range Note 4: Operation Temperature + 60°C is defined as panel surface termperature. www.avnet-embedded.eu
document version 0.3 G190EAN01.0 5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows: Note 1: The 2dot checker Pattern is defined as below: Symble Parameter Min. Typ. Max. Unit Condition VCC Logic/LCD Drive Voltage 4.5 5.0 5.5 [Volt] ±10% ICC Input Current - 0.7 0.9 [A] Vin=5V, 2dot checker Pattern, at 60Hz IRush Inrush Current - 2.7 3.4 [A] Note 2 PCC VCC Power - 3.5 4.5 [Watt] Vin=5V , 2dot checker Pattern, at 60Hz VCCrp Allowable Logic/LCD Drive Ripple Voltage - - 300 [mV] p-p With panel loading www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Note 2: Measurement conditions: +5.0V +12.0V VCC 47K VR1 47K SW1 SW MAG-SPST 1 2 AO6402 G D2S 1uF/16V AO6402 G D2 S 0.01uF/25V 1uF/25V (High to Low) Control Signal (LCD Module Input) 90% 10% VDD rising time 0 V 5.0 V 470 us www.avnet-embedded.eu
document version 0.3 G190EAN01.0
5.2 Backlight Unit
Following characteristics are measured under a stable condition at 25 oC (Room Temperature): Symbol Parameter Min. Typ. Max. Unit Remark VCC Input Voltage 10.8 12.0 13.2 [Volt] IVCC Input Current 1.2 [A] 100% PWM Duty PVCC Power Consumption 14.4 15.8 [Watt] 100% PWM Duty Irush LED Inrush Current - 1.7 2.1 [A] at rising time=470us Analog Control Input Voltage 0 - 3.3 V Dimming Frequency 0.2 20 [kHz] Swing Voltage 3 3.3 5 V FPWM Dimming Duty Cycle 10 - 100 % IF LED Forward Current 80 mA Ta = 25 oC - - - Volt - 3.2 3.6 Volt I F =80 mA, Ta = 25oC VF LED Forward V oltage - - - PLED LED Power Consumption 13.8 15.6 Watt IF =80 mA, Ta = 25oC LED Lifetime 50,000 Hrs IF=80 mA, Ta= 25 oC Note 1: Ta means ambient temperature of TFT-LCD module. Note 2: VCC, Ivcc, PVCC , Irush LED are defined for LED B/L.(100% duty of PWM dimming) Note 3: IF, VF , PLED are defined for LED Light Bar. Note 4: If G190EAN01.0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 5: LED life means brightness goes down to 50% initial brightness. Note 6: Two kind types for adjusting brightness: PWM and Analog. www.avnet-embedded.eu
document version 0.3 G190EAN01.0 6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format. R G B R G B R G B R G B R G B R G B R G B R G B 1 2 1279 1280 1st Line 1024th Line www.avnet-embedded.eu
document version 0.3 G190EAN01.0
6.2 The Input Data Format
Note1: Normally DE mode only. VS and HS on EVEN channel are not used. Note2: Please follow VESA. Note3: 8-bit in www.avnet-embedded.eu
document version 0.3 G190EAN01.0
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels. PIN # SIGNAL NAME DESCRIPTION
1 RxOIN0- Negative LVDS differential data input (Odd data)
2 RxOIN0+ Positive LVDS differential data input (Odd data)
3 RxOIN1- Negative LVDS differential data input (Odd data)
4 RxOIN1+ Positive LVDS differential data input (Odd data)
5 RxOIN2- Negative LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
6 RxOIN2+ Positive LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
7 VSS Power Ground
8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN+ Positive LVDS differential clock input (Odd clock)
10 RxOIN3- Negative LVDS differential data input (Odd data)
11 RxOIN3+ Positive LVDS differential data input (Odd data)
12 RxEIN0- Negative LVDS differential data input (Even data)
13 RxEIN0+ Positive LVDS differential data input (Even data)
14 VSS Power Ground
15 RxEIN1- Negative LVDS differential data input (Even data)
16 RxEIN1+ Positive LVDS differential data input (Even data)
17 VSS Power Ground
18 RxEIN2- Negative LVDS differential data input (Even data)
19 RxEIN2+ Positive LVDS differential data input (Even data)
20 RxECLKIN- Negative LVDS differential clock input (Even clock)
21 RxECLKIN+ Positive LVDS differential clock input (Even clock)
22 RxEIN3- Negative LVDS differential data input (Even data)
23 RxEIN3+ Positive LVDS differential data input (Even data)
24 VSS Power Ground
25 VSS Power Ground
26 NC Do not connect ( for AUO test)
27 VSS Power Ground
28 VCC +5.0V Power Supply 29 VCC +5.0V Power Supply 30 VCC +5.0V Power Supply www.avnet-embedded.eu
document version 0.3 G190EAN01.0 Note1: Start from left side Note2: Input signals of odd and even clock shall be the same timing. Note3: Please follow VESA. Connector 1 30 RxOIN0- VCC www.avnet-embedded.eu
document version 0.3 G190EAN01.0
6.4 Interface Timing
6.4.1 Timing Characteristics
Signal Item Symbol Min Typ Max Unit Period Tv 1032 1066 1150 Th Active Tdisp(v) 1024 1024 1024 Th Vertical Section Blanking Tbp(v)+Tfp(v)+PWvs 8 42 126 Th Period Th 780 844 2047 Tclk Active Tdisp(h) 640 640 640 Tclk Horizontal Section Blanking Tbp(h)+Tfp(h)+PWhs 140 204 - Tclk Period Tclk 22.2 18.52 14.81 ns Clock Frequency Freq. 45 54 67.5 MHz Frame Rate Frequency 1/Tv 50 60 75 Hz Note : DE mode only www.avnet-embedded.eu
document version 0.3 G190EAN01.0
6.4.2 Timing Diagram
M Invalid Data Tdisp(v) DE DE Invalid Data RGB Data Th RGB Data (Even) 3 9M-1 Invalid Data N Hsync M-2 Invalid Data11 5M-3 Vsync Invalid Data CLK M-5 Invalid Data M-4 Tbp(h) Pixel Pixel Pixel Pixel Pixel RGB Data (Odd) Tbp(v) Tclk Pixel PixelPixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel 4 3 Tv Tdisp(h) LineLine Line Line LineLine Tfp(v) Tfp(h) PWvs PWhs www.avnet-embedded.eu
document version 0.3 G190EAN01.0
6.5 Power ON/OFF Sequence
VDD power and LED on/off sequence is as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power Sequence Timing Power Sequence Timing Value Parameter Min. Typ. Max. Units T1 0.5 - 10 T2 30 40 50 T3 200 - -- T4 0.5 - 10 T5 10 - - T6 10 - - T7 0 - - T8 10 - - T9 - - 10 T10 110 - - T11 0 16 50 T12 0 10 T13 1000 - - ms www.avnet-embedded.eu
document version 0.3 G190EAN01.0 7. Connector & Pin Assignment Physical interface is described as for the connector on module.These connectors are capable of accommodating the following signals and will be following components.
7.1 TFT LCD Module
7.1.1 Connector
Connector Name / Designation Interface Connector / Interface card Manufacturer JAE / STM Type Part Number FI-XB30SSLA-HF15 / MSBKT2407P30HB Mating Housing Part Number FI-X30HL FI-X30H (Unlocked Type)
7.1.2 Pin Assignment
Pin# Signal Name Pin# Signal Name
1 RxOIN0- 2 RxOIN0+
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 VSS 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 VSS
15 RxEIN1- 16 RxEIN1+
17 VSS 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 VSS
25 VSS 26 NC
27 VSS 28 VCC
29 VCC 30 VCC
www.avnet-embedded.eu
document version 0.3 G190EAN01.0
7.2 Backlight Unit
Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. Connector Name / Designation LED Connector / Backlight Manufacturer STM Type Part Number MS24019R Mating Type Part Number P24019
7.2.1 Signal for LED connector
Pin # Symbol Pin Description 1 +12V Power +12V 2 +12V Power +12V 3 +12V Power +12V
4 NC NC
5 GND GND
6 GND GND
7 GND GND
8 EN Enable(0V:disable, 5V:Enable)
(or Analog Control Voltage) PWM; duty 10%~ 100% (Analog Control Voltage 0~3.3V) www.avnet-embedded.eu
document version 0.3 G190EAN01.0 8. Reliability Test Environment test conditions are listed as following table. Items Required Condition Note Temperature Humidity Bias (THB) Ta= 50 o C, 80%RH, 300hours High Temperature Operation (HTO) Ta= 50o C, 300hours Low Temperature Operation (LTO) Ta= 0 o C, 300hours High Temperature Storage (HTS) Ta= 60 o C, 300hours Low Temperature Storage (LTS) Ta= -20 o C, 300hours Vibration Test (Non-operation) Acceleration: 1.5 G Wave: Random Frequency: 10 - 200 - 10 Hz Sweep: 30 Minutes each Axis (X, Y, Z) Shock Test (Non-operation) Acceleration: 50 G Wave: Half-sine Active Time: 20 ms Direction: ±X, ±Y, ±Z (one time for each Axis) Drop Test Height: 60 cm, package test Thermal Shock Test (TST) -20 oC /30min, 60/ oC 30min, 100 cycles 1 On/Off Test On/10sec, Off/10sec, 30,000 cycles Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 9 points, 25 times/ point. ESD (Electrostatic Discharge) Air Discharge: ± 15KV, 150pF(330Ω ) 1sec 9 points, 25 times/ point. Altitude Test Operation:10,000 ft Non-Operation:30,000 ft Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change. A cycle of rapid temperature change consists of varying the temperature from -20o C to 60o C, and back again. Power is not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. Note 2: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost. Self-recoverable. No hardware failures. Note 3: /circle6 Water condensation is not allowed for each test items. /circle6 Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. /circle6 The reliability test is performed only to examine the TFT-LCD module capability. /circle6 To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. /circle6 N o function failure occurs. www.avnet-embedded.eu
document version 0.3 G190EAN01.0 9. Shipping Label and Packaging
9.1 Shipping Label
The label is on the panel as shown below: Note 1: For Pb Free products, AUO will add for identification. Note 2: For RoHS compatible products, AUO will add for identification. Note 3: For China RoHS compatible products, AUO will add for identification. Note 4: The Green Mark will be presented only when the green documents have been ready by AUO Internal Green Team.
9.2 Packaging
G190EAN01.0 www.avnet-embedded.eu
document version 0.3 27/28 G190EAN01.0 10. Mechanical Characteristic www.avnet-embedded.eu
document version 0.3 28/28 G190EAN01.0 www.avnet-embedded.eu
Ellekær 9
2730 Herlev
Phone: +45 3678 6250 Fax: +45 3678 6255 denmark @avnet-embedded.eu FInlAnD Avnet Embedded Avnet Nortec Oy Pihatörmä 1 B
02240 Espoo
Phone: +358 20 749 9 260 Fax: +358 20 749 9 280 finland @avnet-embedded.eu FrAnCE Avnet Embedded Avnet EMG France SA Parc Club du Moulin à Vent, Bât 10 33, rue du Dr Georges Lévy
69693 Vénissieux Cedex
Phone: +33 4 78 77 13 92 Fax: +33 4 78 77 13 97 bron @avnet-embedded.eu Avnet Embedded Avnet EMG France SA 14 avenue Carnot
91349 Massy Cedex
Phone: +33 1 64 47 29 29 Fax: +33 1 64 47 99 99 paris @avnet-embedded.eu Avnet Embedded Avnet EMG France SA Les Peupliers II 35 avenue des Peupliers
35510 Cesson-Sévigné
Phone: + 33 2 99 77 37 02 Fax: + 33 2 99 77 37 01 rennes @avnet-embedded.eu GErmAnY (AUstrIA, CZECh rEPUblIC, hUnGArY, POlAnD, sWItZErlAnD) Avnet Embedded Avnet EMG GmbH Gruber Straße 60c
85586 Poing
Phone: +49 8121 775 500 Fax: +49 8121 775 550 poing @avnet-embedded.eu Avnet Embedded Avnet EMG GmbH Lötscher Weg 66
41334 Nettetal
Phone: +49 8121 775 500 Fax: +49 8121 775 550 nettetal @avnet-embedded.eu ItAlY (POrtUGAl, sPAIn) Avnet Embedded Avnet EMG Italy SRL Via Manzoni, 44
20095 Cusano Milanino
Phone: +39 02 660 92 1 Fax: +39 02 660 92 498 milano @avnet-embedded.eu nEthErlAnDs (bElGIUm, lUXEmbOU rG) Avnet Embedded Avnet B.V. Takkebijsters 2
4817 BL Breda
Phone: +31 76 5722400 Fax: +31 76 5722404 benelux @avnet-embedded.eu sWEDEn (nOrWAY) Avnet Embedded Avnet Nortec AB Esplanaden 3 D 172 67 Sundbyberg Phone: +46 8 564 725 50 Fax: +46 8 760 01 10 sweden @avnet-embedded.eu UnItED kInGDOm (IrElAnD) Avnet Embedded 5a Waltham Park White Waltham Maidenhead Berkshire, SL6 3TN Phone: +44 1628 518900 Fax: +44 1628 518901 uk @avnet-embedded.eu www.avnet-embedded.eu June 2013 All trademarks and logos are the property of their respective owners. No guarentee as to the accuracy, completeness or reliability of any information. Subject to modifications and amendments.