G173HW01V0 AUO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 29
Technical content
Datasheet sections
- 2.1 Display Characteristics
- 4.1 Absolute Ratings of TFT LCD Module
- 4.2 Absolute Ratings of Environment
- 5.1 TFT LCD Module
- 5.2 Backlight Unit
- 6.1 Pixel Format Image
- 6.2 The Input Data Format
- 6.4 Interface Timing
- 6.5 Power ON/OFF Sequence
- 7.1 TFT LCD Module
- 7.2 Backlight Unit
- 10.1 Packaging material
- 10.2 External packaging material required
- 10.3 Palletizing sequence
- 10.4 Packing instruction
document version 1.0 1/29 G173HW01 V0 () Preliminary Specification (V) Final Specification Module 1 7.3” FHD Color TFT-LCD Model Name G173HW01 V0 C ustomer Date Approved by Note: This Specification is subject to change without notice. Checked & Approved by Date Vito Huang 2011/5/30 Prepared by Vivian Huang 2011/5/30 Audio Video Business Group / AU Optronics corporation
document version 1.0 3/29 G173HW01 V0 Record of Revision Version & Date Page Old Description New Description 0.0 2011/1/20 All First Edition for Customer 0.1 2011/1/31 12 IDD unit: A IDD unit: mA 14 VCC Max: 12.6V VCC Max: 13.4V
14 Operation Life LED life time
1.0 2011/5/30 5 White Luminance(cd/m 2): 500(Typ.) White Luminance(cd/m2): 400(Typ.) 5 Optical Response Time(ms): 8(Typ.) Optical Response Time(ms): 40(Typ.) 5 Power Consumption(Watt): TBD(Typ.) Power Consumption(Watt): 17(Typ.) 5 Weight(g): TBD(Typ.) Weight(g): 1080(Typ.)
6 Update Viewing Angle
6 Update Optical Response Time
Update Color / Chromaticity Coordinates
6 Update White Luminance
12 IDD (mA): 350(Typ), 600(Max) IDD (mA): 1200(Typ), 1400(Max)
12 PDD (Watt): TBD(Typ), 2(Max) PDD (Watt): 5(Typ), 6(Max)
12 Update the diagram of Vin rising time
14 P VCC (Watt): 11.88(Typ), 13.39(Max) PVCC (Watt): 12(Typ), 15(Max)
14 Update LED Forward Voltage
14 Update Note6 description
25 Update Shipping Label
25 Update Packing Form
28 Update Outline Drawing
document version 1.0 4/29 G173HW01 V0 1. Handling Precautions 1) Since front polarizer is easily damaged, please be cautious and not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. 6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. 7) Do not open nor modify the module assembly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. 12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage. 14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 15) The data on this specification sheet is applicable when LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
document version 1.0 5/29 G173HW01 V0 2. General Description G173HW01 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a LED driver circuit, and a LED backlight system. The screen format is intended to support the FHD (1920(H) x 1080(V)) screen and 16.7M colors (RGB 6-bits + HiFRC data). All input signals are LVDS interface compatible. Inverter card of backlight is not included.
2.1 Display Characteristics
The following items are characteristics summary on t he table under 25 ℃ condition: Items Unit Specifications Screen Diagonal [mm] 17.3W (17.25) Active Area [mm] 381.888 (H) x 214.812 (V) Pixels H x V 1920(x3) x 1080 Pixel Pitch [mm] 0.1989 (per one triad) x 0.1989 Pixel Arrangement R.G.B. Vertical Stripe Display Mode Normally White White Luminance [cd/m2] 400 (Typ.) Contrast Ratio 600 : 1 (Typ) Optical ResponseTime [msec] 40 (Typ, on/off) Nominal Input Voltage VDD [Volt] 3.3 V Power Consumption [Watt] 17 (Typ) Weight [Grams] 1080 (Typ) Physical Size (H x V x D) [mm] 403 (H) x 240 (V) x 12.5 (D) (Typ) Electrical Interface Dual channel LVDS Surface Treatment Hard-coating (3H), Glare treatment Support Color 16.7M colors (RGB 6-bit data + HiFRC data) Temperature Range (Ta) Operating Storage (Non-Operating) o o 0 to +70 -20 to +70 RoHS Compliance RoHS Compliance
document version 1.0 6/29 G173HW01 V0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature): Item Unit Conditions Min. Typ. Max. Note Horizontal (Right) CR = 10 (Left) 80 - Viewing Angle [degree] Vertical (Up) CR = 10 (Down) 80 - Luminance Uniformity [%] 13 Points 75 80 - 2, 3 Rising - 37 50 Falling - 3 10 Optical Response Time [msec] Rising + Falling - 40 60 4, 5 Red x 0.590 0.640 0.690 Red y 0.296 0.346 0.396 Green x 0.264 0.314 0.364 Green y 0.574 0.624 0.674 Blue x 0.100 0.150 0.200 Blue y 0.004 0.054 0.104 White x 0.255 0.305 0.355 Color / Chromaticity Coordinates (CIE 1931) White y 0.268 0.318 0.368 White Luminance (At LED=100mA) [cd/m2 ] 320 400 - 4 Contrast Ratio 500 600 - 4 NTSC % 72 Optical Equipment: BM-5A, BM-7, PR880, or equivalent
document version 1.0 7/29 G173HW01 V0 Note 1: Definition of viewing angle Viewing angle is the measurement of contrast ratio≧10, or ≧5, at the screen center, over a 180° horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90 ° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. Note 2: 13 points position
document version 1.0 8/29 G173HW01 V0 Note 3: Note 4: Measurement method The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and dark room. Center of the screen TFT -LCD Module 50 cm Photo detector LCD Panel Field=1°
document version 1.0 9/29 G173HW01 V0 Note 5: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “Full Black” to “Full White” (rising time), and from “Full White” to “Full Black” (falling time), respectively. The response time is interval between the 10% and 90% of amplitudes. Please refer to the figure as below. 100 Optical response White Black White Tr F Tr R 100 Optical response White Black White Tr F Tr R
document version 1.0 10/29 G173HW01 V0 3. Functional Block Diagram The following diagram shows the functional block of the 17.3 inches Color TFT-LCD Module:
document version 1.0 11/29 G173HW01 V0 4. Absolute Maximum Ratings Absolute maximum ratings of the module are as following:
4.1 Absolute Ratings of TFT LCD Module
Logic/LCD Drive Voltage Vin -0.3 +3.6 [Volt]
4.2 Absolute Ratings of Environment
Operating Temperature TOP 0 +70 [ o Operation Humidity HOP 5 95 [%RH] Storage Temperature TST -20 +70 [ o Storage Humidity HST 5 95 [%RH] Note: Maximum Wet- B u l b s h o u l d b e 3 9 and no condensation.
document version 1.0 12/29 G173HW01 V0 5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows: Symble Parameter Min. Typ. Max. Unit Condition VDD Logic/LCD Drive Voltage 3.0 3.3 3.6 [Volt] ±1 0% IDD Input Current - 1200 1400 [mA] VDD= 5.0V, All Black Pattern At 75Hz, +30% PDD VDD Power - 5 6 [Watt] VDD= 5.0V, All Black Pattern At 75Hz , Note 1 IRush Inrush Current - - 2000 [A] Note 2 VDDrp Allowable Logic/LCD Drive Ripple Voltage - - 100 [mV] p-p VDD= 3.3V, All Black Pattern At 75Hz Note 1: The variance of VDD power consumption is ±30%. Note 2: Measurement conditions: +5.0V +12.0V VCC 47K VR1 47K SW1 SW MAG-SPST 1 2 AO6402 G D2S 1uF/16V AO6402 G D2 S 0.01uF/25V 1uF/25V (High to Low) Control Signal (LCD Module Input) 90% 10% Vin rising time 3.3V 470 us
document version 1.0 13/29 G173HW01 V0
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Note: LVDS Signal Waveform. S ymbol Item Min. Typ. Max. Unit Remark VTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold -100 - - [mV] VCM=1.2V ｜｜ ｜｜VID｜｜ ｜｜ Input Differential Voltage 100 400 600 [mV] VICM Differential Input Common Mode Voltage 1.125 - 1.375 [V] VTH/VTL=+-100mV
document version 1.0 14/29 G173HW01 V0
5.2 Backlight Unit
Following characteristics are measured under a stabl e condition using a inverter at 25℃. (Room Temperature): Symbol P arameter Min. Typ. Max. Unit Remark VCC Input Voltage 10.8 12 13.4 [Volt] IVCC Input Current - 0.99 - [A] 100% PWM Duty PVCC Power Consumption - 12 15 [Watt] 100% PWM Duty FPWM Dimming Frequency 200 - 20K [Hz] Swing Voltage 3 3.3 5.5 [Volt] Dimming duty cycle 5 - 100 % IF LED Forward Current - 100 - [mA] Ta = 25 o C - (3.3) (3.7) [Volt] IF = 100mA, Ta = 0 o C - 3.2 3.6 [Volt] IF = 100mA, Ta = 25 o C VF LED Forward Voltage - (3.1) (3.5) [Volt] IF = 100mA, Ta = 70 o C PLED LED Power Consumption - (10.24) 11.52 [Watt] LED Life Time 50,000 - - Hrs IF=100mA, Ta= 25 o C Note 1: Ta means ambient temperature of TFT-LCD modu le. Note 2: VCC, IVCC , PVCC are defined for LED backlight.(100% duty of PWM dimming) Note 3: IF, VF are defined for one channel LED. There are four LED channel in back light unit. Note 4: If G173HW01 V0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data. Note 6: LED lifetime is definition: brightness is decreased to 50% of the initial value. LED lifetime is restricted under n o r m a l c o n d i t i o n a m b i e n t t e m p e r a t u r e 2 5 a n d L E D o p e r a t i n g I F 1 0 0 m A
document version 1.0 15/29 G173HW01 V0 6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format. 1st Pixel 2nd Pixel 1919 th Pixel 1920th Pixel 1st Line R G B R G B R G B R G B 1080th Lin R G B R G B R G B R G B
document version 1.0 16/29 G173HW01 V0
6.2 The Input Data Format
Note1: Normally, DE, VS, HS on EVEN channel are not used. Note2: 8-bit in
document version 1.0 17/29 G173HW01 V0
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels. PIN # SIGNAL NAME DESCRIPTION
1 RxOIN0- Negative LVDS differential data input (Odd data)
2 RxOIN0+ Positive LVDS differential data input (Odd data)
3 RxOIN1- Negative LVDS differential data input (Odd data)
4 RxOIN1+ Positive LVDS differential data input (Odd data)
5 RxOIN2- Negative LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
6 RxOIN2+ Positive LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
7 VSS Power Ground
8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN+ Positive LVDS differential clock input (Odd clock)
10 RxOIN3- Negative LVDS differential data input (Odd data)
11 RxOIN3+ Positive LVDS differential data input (Odd data)
12 RxEIN0- Negative LVDS differential data input (Even data)
13 RxEIN0+ Positive LVDS differential data input (Even data)
14 VSS Power Ground
15 RxEIN1- Negative LVDS differential data input (Even data)
16 RxEIN1+ Positive LVDS differential data input (Even data)
17 VSS Power Ground
18 RxEIN2- Negative LVDS differential data input (Even data)
19 RxEIN2+ Positive LVDS differential data input (Even data)
20 RxECLKIN- Negative LVDS differential clock input (Even clock)
21 RxECLKIN+ Positive LVDS differential clock input (Even clock)
22 RxEIN3- Negative LVDS differential data input (Even data)
23 RxEIN3+ Positive LVDS differential data input (Even data)
24 VSS Power Ground
25 VSS Power Ground
26 VSS Power Ground
27 VSS Power Ground
28 VDD +3.3V Power Supply 29 VDD +3.3V Power Supply 30 VDD +3.3V Power Supply
document version 1.0 18/29 G173HW01 V0 Note1: Start from left side Note2: Input signals of odd and even clock shall be the same timing. N ote3: Please follow PSWG. Connector 1 30 RxOIN0- VDD
document version 1.0 19/29 G173HW01 V0
6.4 Interface Timing
6.4.1 Timing Characteristics
Basically, interface timings should match the 1920X1080 / 60Hz manufacturing guide line timing. Note : DE mode only
4.2 Timing Diagram
document version 1.0 20/29 G173HW01 V0
6.5 Power ON/OFF Sequence
VDD power and lamp on/off sequence is as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power Sequence Timing P ower Sequence Timing Value Parameter Min. Typ. Max. Units T1 0.5 - 10 T2 0 - 50 T3 200 - -- T4 0.5 - 10 T5 10 - - T6 10 - - T7 0 - - T8 10 - - T9 - - 10 T10 110 - - T11 0 50 T12 0 10 T13 500 - - ms
document version 1.0 21/29 G173HW01 V0 7. Connector & Pin Assignment Physical interface is described as for the connector on module.These connectors are capable of accommodating the following signals and will be following components.
7.1 TFT LCD Module
1.1 Connector
Connector Name / Designation Interface Connector / Interface card Manufacturer HRS Type Part Number MDF76TW-30S-1H Mating Type Part Number MDF76-30P-1C
7.1.2 Pin Assignment
Pin# Signal Name Pin# Signal Name
1 RxOIN0- 2 RxOIN0+
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 VSS 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 VSS
15 RxEIN1- 16 RxEIN1+
17 VSS 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 VSS
25 VSS 26 VSS
27 VSS 28 VDD
29 VDD 30 VDD
document version 1.0 22/29 G173HW01 V0
7.2 Backlight Unit
Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.
7.2.1 Connector
Connector Name / Designation Lamp Connector / Backlight lamp Manufacturer HRS Type Part Number DF14A-6P-1.25H Mating Type Part Number DF14-6S-1.25C
7.2.2 Pin Assignment
Pin No. Symbol Description Pin1 VLED 12V input Pin2 VLED 12V input Pin3 GND GND Pin4 GND GND Pin5 On/OFF 3.3-5V:ON, 0V:OFF Pin6 Dimming PWM
document version 1.0 23/29 G173HW01 V0 8. Reliability Test Environment test conditions are listed as following table. Items Required Condition Note Temperature Humidity Bias (THB) Ta= 50℃, 80%RH, 240hours High Temperature Operation (HTO) Ta= 70℃, 240hours Low Temperature Operation (LTO) Ta= 0℃, 240hours High Temperature Storage (HTS) Ta= 70℃, 240hours Low Temperature Storage (LTS) Ta= -20℃, 240hours Vibration Test (Non-operation) Acceleration: 1.5 G Wave: Random Frequency: 10 - 200 - 10 Hz Sweep: 30 Minutes each Axis (X, Y, Z) Shock Test (Non-operation) Acceleration: 50 G Wave: Half-sine Active Time: 20 ms Direction: ±X, ±Y, ±Z (one time for each Axis) Drop Test Height: 60 cm, package test Thermal Shock Test (TST) -20℃/30min, 60℃/30min, 50 cycles 1 Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point. ESD (Electro-Static Discharge) Air Discharge: ± 15KV, 150pF(330Ω ) 1sec 8 points, 25 times/ point. Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change. A cycle of rapid temperature change consists of varying the temperature from -20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. Note 2: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost. Self-recoverable. No hardware failures.
document version 1.0 24/29 G173HW01 V0 9. Shipping Label Unit: mm
document version 1.0 25/29 G173HW01 V0 10. Packing Form
10.1 Packaging material
LABEL CARTON. CUSHION PACKING
10.2 External packaging material required
‧C arton : 524mm*321mm*360mm, weight (carton + cushion): 1250g
document version 1.0 26/29 G173HW01 V0 ‧Pallet : 1140mm*980mm*140mm ‧Stretch film : 500mm (W)*300M (L) ‧Corner angle : L type fiber board ‧PET band : 19mm (W) ‧ Label : 220mm*200mm
10.3 Palletizing sequence
pcs / box box / layer layer / pallet pcs / pallet Shipping by air 10 2*3 3 180 Shipping by sea 10 2*3 3 180
document version 1.0 27/29 G173HW01 V0
10.4 Packing instruction
document version 1.0 28/29 G173HW01 V0 11. Outline Drawing
document version 1.0 29/29 G173HW01 V0