G104SN02V2 AUO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 24
Technical content
Datasheet sections
- 2.1 Display Characteristics
- 2.2 Optical Characteristics
- 4.1 Absolute Ratings of TFT LCD Module
- 4.2 Absolute Ratings of Environment
- 5.1 TFT LCD Module
- 5.2 Backlight Unit
- 6.1 Pixel Format Image
- 6.2 Scanning Direction
- 6.3 TFT-LCD Interface Signal Description
- 6.4 The Input Data Format
- 6.5 TFT-LCD Interface Timing
- 6.6 Power ON/OFF Sequence
- 7.1 TFT-LCD Signal (CN1): LVDS Connector
- 7.2 LED Backlight Unit (CN2): Driver Connector
- 7.3 LED Backlight Unit (CN4): Light bar Connector
- 9.1 LCM Outline Dimension (Front View)
- 9.2 LCM Outline Dimension (Rear View)
- 10.1 Shipping Label (on the rear side of TFT-LCD display)
- 10.2 Carton Package
- 11 Safety
- 11.1 Sharp Edge Requirements
- 11.2 Materials
- 11.3 Capacitors
- 11.4 National Test Lab Requirement
G104SN02 V2 rev. 1.0 Page 1/24 G104SN02 V2 ) Preliminary Specifications ( V ) Final Specifications Module 10.4 Inch Color TFT-LCD Model Name G104SN02 V2 Customer D at e Checked & Approved by Note: This Specification is subject to change without notice. Approved by D at e Debbie Chiu 2009/05/14 Prepared by Vivian Huang 2009/05/14 General Display Business Division / AU Optronics corporation AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 Record of Revision Version and Date Page Old description Ne w Description 0.0 2009/02/03 All First Edition 1.0 2009/05/14 5 Typical Power Consumption: 5.2W Typical Power Consumption: 4.8W
6 Color / Chromaticity
Coordinates(Red x y, Green x y, Blue x y): TBD Add Min., Typ., Max.
13 Parameter guideline for LED backlight Add VF, IF, PLED
IVCC(input current):0.35[A] IVCC(input current):0.32[A] PLED(Power Consumption):4.2[W] PLED(Power Consumption):3.8[W] Dimming Duty cycle Min: TBD Dimming Duty cycle Min: 5 14 Fig. 1 Normal scan (Pin19, RSV = Low or NC) Fig. 2 Reverse scan (Pin19, RSV = High) Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High)
19 Connector & Pin Assignment Add LED Backlight Unit (CN4): Light bar Connector
21 LCM Outline Dimension (Front View) Remove the 4 screw hole
22 LCM Outline Dimension (Rear View) Add CN4 drawing
23 Label and Packaging Add Shipping Label, Carton Package
AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 1. Operating Precautions 1) Since front polarizer is easily damaged, please be cautious and not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. 6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. 7) Do not open nor modify the module assembly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. 12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage. 14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 15) The data on this specification sheet is applicable when LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 2. General Description This specification applies to the Color Active Matrix Liquid Crystal Display G104SN02 V2 composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). LED driving board for backlight unit is included in G104 SN02 V2 and the LED unit is replaceable. All input signals are LVDS interface and compatible with G104SN02 V1. G104SN02 V2 designed with wide viewing angle; wide temperature and long life LED backlight is well suited for industial applications. G104SN02 V2 is a RoHS product.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition: Items Unit Specifications Screen Diagonal [inch] 10.4 Active Area [mm] 211.2 (H) x 158.4 (V) Pixels H x V 800 x 3(RGB) x 600 Pixel Pitch [mm] 0.264 x 0.264 Pixel Arrangement R.G.B. Vertical Stripe Display Mode TN, Normally White Nominal Input Voltage VDD [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 4.8W All black pattern Weight [Grams] 360(Typ.) Physical Size [mm] 243.0(H) x 184.0(V) x 8.0(D)(Typ.) Electrical Interface 1 channel LVDS Surface Treatment Anti-glare, Hardness 3H Support Color 16.2M / 262K colors Temperature Range Operating Storage (Non-Operating) [oC] [oC] -30 to +85 -30 to +85 RoHS Compliance RoHS Compliance AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
2.2 Optical Characteristics
optical characteristics are measured under stable conditi o n s a t 2 5 ( R o o m T e m p e r a t u r e Item Unit Conditions Min. Typ. Max. Remark White Luminance [cd/m2] IF= 80mA/1 LED Line (center point) 300 400 - Note 1 Uniformity % 5 Points 75 - - Note 2, 3 Contrast Ratio 500 700 - Note 4 [msec] Rising - 20 30 [msec] Falling - 10 20 Response Time [msec] Raising + Falling - 30 50 Note 5 [degree] [degree] Horizontal (Right) CR = 10 (Left) Viewing Angle [degree] [degree] Vertical (Upper) CR = 10 (Lower) Note 6 Red x 0.490 0.540 0.590 Red y 0.263 0.313 0.363 Green x 0.301 0.351 0.401 Green y 0.530 0.580 0.630 Blue x 0.115 0.165 0.215 Blue y 0.085 0.135 0.185 White x 0.26 0 0.310 0. 3 Color / Chromaticity Coordinates (CIE 1931) White y 0.2 80 0.330 0. 3 Color Gamut % - 45 - Note 1: Measurement method Eq u ipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture 1 w i t h 5 0 c m v i e w i n g d i s t a n c e Test Point Center Environment < 1 lux LCD Module SR_3 or equivalent Measuring distance Module Driving Equipment AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 Note 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V)) 1 2 4 5 H /4 H /4 H /4 H /4 H W W /4 W /4 W /4 W /4 Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminance Note 4: Definition of contrast ratio (CR): Note 5: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of amplitudes. Please refer to the figure as below. Note 6: Definition of viewing angle V i e w i n g a n g l e i s t h e m e a s u r e m e n t o f c o n t r a s t r a t i o 1 0 a t t h e s c r e e n c e n t e r o v e r a 1 8 0 ° h o r i z o n t al and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired M inimum Brightness of five points δW9 = Maximum Brightness of five points Contrast ratio (CR)= Brightness on the “White” state Brightness on the “Black” state 100 Optical response White Black White Tf Tr Optical response White Black White Tr AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 measurement viewing angle. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 3. Functional Block Diagram The following diagram shows the functional block of the 10.4 inch color TFT/LCD module: AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Logic/LCD Drive Voltage Vin -0.3 +4.0 [Volt]
4.2 Absolute Ratings of Environment
Operating Temperature TOP -30 +85 [oC] Operation Humidity HOP 5 95 [%RH] Storage Temperature TST -30 +85 [oC] Storage Humidity HST 5 95 [%RH] Note: Maximum Wet- B u l b s h o u l d b e 3 9 and no condensation. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Units Remark VDD Logic/LCD Input Voltage 3.0 3.3 3.6 [Volt] IVDD LCD Input Current - 280 - [mA] VDD=3.3V at 60 HZ, all Black Pattern PVDD LCD Power comsumption - 0.924 - [Watt] VDD=3.3V at 60 HZ, all Black Pattern Irush LCD LCD Inrush Current - - 1.5 [A] Note 1; VDD=3.3V Black Pattern, Rising time=470us VDD rp Allowable Logic/LCD Drive Ripple Voltage - - 100 [mV] p-p VDD=3.3V at 60 HZ, all Black Pattern Note 1: Measurement condition: AO6402 G D2S AO6402 G D2 S 1uF/16V 1uF/25V 0.01uF/25V VR1 47K +12.0V VCC SW1 SW MAG-SPST 1 2 (High to Low) Control Signal (LCD Module Input) +3.3V 47K 90% 10% VDD rising time 3.3V 470 us VDD AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
5.1.2 Signal Electrical Characteristics
t signals shall be low or Hi-Z state when VDD is off. Note: LVDS Signal Waveform. Symbol Item Min. Ty p . Max. Unit Remark VTH Differential Input High Threshold - - 100 [m V] VCM=1.2V VTL Differential Input Low Threshold 100 - - [m V] VCM=1.2V ｜｜｜｜VID｜｜｜｜ I nput Differential Voltage 100 400 600 [mV] VICM Diff erential Input Common Mode Voltage 1.1 - 1.45 [ V] VTH/VTL=+-100mV AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
5.2 Backlight Unit
5.2.1 Parameter guideline for LED backlight
owing characteristics are measured under a stable condition using a i n v e r t e r a t 2 5 J . (Room Temperature): Symbol Parameter Min. Typ. Max. Unit Remark VCC Input Voltage 10.8 12 12.6 [Volt] IVCC Input Current - 0.32 - [A] 100% PWM Duty PVCC Power Consumption - 3.8 - [Watt] 100% PWM Duty Irush LED Inrush Current - - 1.5 [A] at rising time=470us FPWM Dimming Frequency 200 - 20K [Hz] Swing Voltage 3 3.3 5.5 [Volt] Dimming duty cycle 5 - 100 % IF LED Forward Current - 80 - [mA] T a = 25oC - 24.5 - [Volt] IF = 80mA, Ta = -30oC - 22.4 25.55 [Volt] IF = 80mA, Ta = 25oC VF LED Forward Voltage - 21.7 - [Volt] IF = 80mA, Ta = 85oC PLED LED Power Consumption - 3.6 - [Watt] Operation Life 50,000 - - Hrs IF=80mA, Ta= 25oC Note 1: Ta means ambient temperature of TFT-LCD module. Note 2: VCC, IVCC , Irush LED, PVCC are defined for LED backlight.(100% duty of PWM dimming) Note 3: IF, VF are defined for one channel LED. There are two LED channel in back light unit. Note 4: If G104SN02 V2 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 6. Signal Characteristics
6.1 Pixel Format Image
owing figure shows the relationship between input signal and LCD pixel format. 1st Pixel 2nd Pixel 799th Pixel 800th Pixel 1st Line R G B R G B R G B R G B 600th Lin R G B R G B R G B R G B
6.2 Scanning Direction
following figures show the image seen from the front view. The arrow indicates the direction of scan. Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High) AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
6.3 TFT-LCD Interface Signal Description
module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device. Input Signal Interface Pin No. Symbol Description 1 VDD Power Supply, 3.3V (typical) 2 VDD Power Supply, 3.3V (typical)
3 GND Ground
4 DPS Reverse Scan Function [H: Enable; L/NC: Disable]
5 RxIN0-
6 RxIN0+
LVDS receiver signal channel 0 LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0)
7 GND Ground
8 RxIN1-
9 RxIN1+
LVDS receiver signal channel 1 LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1)
10 GND Ground
11 RxIN2-
12 RxIN2+
LVDS receiver signal channel 2 LVDS Differential Data Input (B2, B3, B4, B5, DE)
13 GND Ground
14 RxCLKIN-
15 RxCLKIN+
LVDS receiver signal clock
16 GND Ground
17 RxIN3-
18 RxIN3+
LVDS receiver signal channel 3, NC for 6 bit LVDS Input LVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV) 19 RSV Reserved for AUO internal test. Please treat it as NC.
20 SEL68 6/8bits LVDS data input selection [H: 8bits L/NC: 6bit]
Note 1: Input Signals shall be in low status when VDD is off. Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”. Note 3: RSV stands for “Reserved”. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
6.4 The Input Data Format
6.4.1 SEL68
SEL68 =“Low” or “NC” for 6 bits LVDS Input SEL68 = “High” for 8 bits LVDS Input Note1: Please follow PSWG. Note2: R/G/B data 7:MSB, R/G/B data 0:LSB Signal Name Description Remark Red Data 7 Red Data 6 Red Data 5 Red Data 4 Red Data 3 Red Data 2 Red Data 1 Red Data 0 Red-pixel Data For 8Bits LVDS input MSB: R7 ; LSB: R0 For 6Bits LVDS input MSB: R5 ; LSB: R0 Green Data 7 Green Data 6 Green Data 5 Green Data 4 Green Data 3 Green Data 2 Green Data 1 Green Data 0 Green-pixel Data For 8Bits LVDS input MSB: G7 ; LSB: G0 For 6Bits LVDS input MSB: G5 ; LSB: G0 Blue Data 7 Blue Data 6 Blue Data 5 Blue Data 4 Blue Data 3 Blue Data 2 Blue Data 1 Blue Data 0 Blue-pixel Data For 8Bits LVDS input MSB: B7 ; LSB: B0 For 6Bits LVDS input MSB: B5 ; LSB: B0 RxCLKIN LVDS Data Clock DE Data Enable Signal When the signal is high, the pixel data shall be valid to be displayed. Note: Output signals from any system shall be low or Hi-Z state when VDD is off. NS-like format AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
6.5 TFT-LCD Interface Timing
6.5.1 Timing Characteristics
Signal Symbol Min. Typ. Max. Unit Clock Frequency 1/ T Clock 30 40 50 MHz Period T V 608 628 1024 Active T VD -- 600 -- Vertical Section Blanking TVB 8 28 424 TLine Period T H 960 1056 1060 Active T HD -- 800 -- Horizontal Section Blanking T HB 160 256 260 TClock Note 1: Frame rate is 60 Hz. Note 2: DE mode.
6.5.2 Input Timing Diagram
Input Timing Definition ( DE Mode) TCLOCK Input Data Pix el Pixel Pixel Pixel N-1 Pixel N Invaild Data Invail d Data Pixel AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
6.6 Power ON/OFF Sequence
power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power ON/OFF sequence timing Value Parameter Min. Typ. Max. Units T1 0.5 - 10 [ms] T2 30 40 50 [ms] T3 200 - - [ms] T4 10 - - [ms] T5 10 - - [ms] T6 0 - - [ms] T7 10 - - [ms] T8 100 - - [ms] T9 0 16 50 [ms] T10 - - 10 [ms] T11 1000 - - [ms] The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 7. Connector & Pin Assignment Phys ical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.
7.1 TFT-LCD Signal (CN1): LVDS Connector
Connector Name / Designation Signal Connector Manufacturer STM or compatible Connector Model Number MSB24013P20HA or compatible Adaptable Plug P24013P20 or compatible Pin No. Symbol Pin No. Symbol
1 VDD 2 VDD
3 GND 4 DPS
5 RxIN0- 6 RxIN0+
7 GND 8 RxIN1-
9 RxIN1+ 10 GND
11 RxIN2- 12 RxIN2+
13 GND 14 RxCKIN-
15 RxCKIN+ 16 GND
17 RxIN3- 18 RxIN3+
19 RSV 20 SEL68
7.2 LED Backlight Unit (CN2): Driver Connector
Connector Name / Designation Lamp Connector Manufacturer ENTERY or compatible Connector Model Number 3808K-F05N-02R or compatible Mating Model Number H208K–P05N-02B or compatible Pin No. symbol description Pin1 VCC 12V input Pin2 GND GND Pin3 On/OFF 5V-ON,0V-OFF Pin4 Dimming PWM Pin5 NA
7.3 LED Backlight Unit (CN4): Light bar Connector
Connector Name / Designation Lamp Connector Manufacturer ENTERY or compatible Connector Model Number H208K–P03N-02B or compatible Mating Model Number(CN3) 3808K-F03N-02R or compatible Pin No. symbol description Color Pin1 H LED anode Red Pin2 L LED cathode White Pin3 L LED cathode Black AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 8. Reliability Test Criteria Items Required Condition Note Temperature Humidity Bias 40K , 90%RH, 300 hours High Temperature Operation 85K , 300 hours Low Temperature Operation -30K , 300 hours Hot Storage 85K 300 hours Cold Storage -30 K 300 hours Thermal Shock Test - 0 K 30 min, 0 K 30 min, 100cycles, 40 ℃ minimun ramp rate Hot Start Test 85℃/ 1Hr min. power on/off per 5 minutes, 5 times Cold Start Test -30℃/ 1Hr min. power on/off per 5 minutes, 5 times Shock Test (Non-Operating) 50G, 20ms, Half-sine wave, ( ±X, ±Y, ±Z) Vibration Test (Non-Operating) 1.5G, (10~200Hz, Sine wave) 30 mins/axis, 3 direction (X, Y, Z) On/off test On/10 sec, Off/10 sec, 30,000 cycles ESD Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point Air Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point Note 1 EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/m Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable. No hardware failures. Note2: /circle6 Water condensation is not allowed for each test items. /circle6 Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. /circle6 The reliability test is performed only to examine the TFT-LCD module capability. /circle6 To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page 21/24 G104SN02 V2 9. Mechanical Characteristics
9.1 LCM Outline Dimension (Front View)
AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page 22/24 G104SN02 V2
9.2 LCM Outline Dimension (Rear View)
AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2 10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
10.2 Carton Package
Note: 1. Max. Capacity: 20pcs LCD Modules / per carton 2. Max. Weight: 10 kg / per carton 3. The outside dimension of carton is 483(L) mm x 285(W) mm x 355(H) mm AAUO Confidential For GLEICHMANN Internal Use Only
G104SN02 V2 rev. 1.0 Page G104SN02 V2
11 Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V1 or better. The actual UL f lammability rating will be printed on the printed circuit board.
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to: UL 1950, First Edition U.S.A. Information Technology Equipment AAUO Confidential For GLEICHMANN Internal Use Only