G057QN01V0 AUO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 22
Technical content
Datasheet sections
- 2.1 Display Characteristics
- 2.2 Optical Characteristics
- 4.1 Absolute Ratings
- 4.2 Absolute Ratings of Environment
- 5.1 TFT-LCD Driving
- 5.2 Backlight Unit Driving
- 6.1 Pixel Format Image
- 6.2 Scanning Direction
- 6.3 The Input Data Format
- 6.4 TFT- LCD Interface Signal Description
- 6.5 TFT- LCD Interface Timing
- 6.6 LED Backlight Unit Interface Signal Description
- 6.7 Power ON/OFF Sequence
- 7.1 TFT- LCD Signal (CN1): LCD Connector
- 7.2 LED Backlight Unit (CN2): Backlight Connector
- 7.3 PIN 1 definition of CN1 and CN2
- 10.1 Shipping Label (on the rear side of TFT-LCD display)
- 10.2 Carton Package
- 11 Safety
- 11.1 Keen Edge Requirements
- 11.2 Materials
- 11.3 Capacitors
- 11.4 National Test Lab Requirement
G057QN01 V0 Ver. 1.0 G057QN01 V0 □□□□ Preliminary Specification ■■■■ Final Specification Module 5.7 Inch Color TFT-LCD Model Name G057QN01 V0 Customer Date Checked & Approved by Note: This Specification is subject to change without notice. Approved by Date Debbie Chiu 2008/08/04 Prepared by David Hsing 2008/06/20 General Display Business Division / AU Optronics corporation
G057QN01 V0 Ver. 1.0 G057QN01 V0 Record of Revision Version and Date Page Old description New Description Remark 0.1, Oct. 04, 2007 All First edition preliminary specifications
5 No description Add “The most suitable view angle:12
o’clock” Section 2.1
11 No description Add “VF typical specification”
Add “Note 1” Section 5.2.1
16 Pin 3: Hsync
Pin 4: Vsync Pin 3: NC Pin 4: NC Section 7.1 0.2, Nov.20, 2007 2D drawing update Add” Suggested applying torque: 0.15~0.2 Nm“ Section 9
5 Typical Power Consumption
2.19W (LCD:0.69W/LED BLU: 1.5W) Typical Power Consumption 1.57W (LCD:0.37W/LED BLU: 1.2W) Section 2.1 6 Revise Optical Characteristics Section 2.2 Absolute Ratings IF: Max.=30mA VR: Max.= No definition IR: Max.= No definition Absolute Ratings IF: Max.=20mA VR: Max.=5V IR: Max.=10 0μA Section 4.1 Power Specification IDD: Typ.=210mA PDD: Typ.=0.69W Power Specification IDD: Typ.=115mA, Max.=130mA PDD: Typ.=0.37W, Max.=0.43W Section 5.1.1 Parameter guideline for LED IF: Max.= No definition VF: Typ.= 27.6V (I F=15mA, Ta=-30 oC) VF: Typ.= 26.4V, Max.= TBD (I F=15mA, Ta=25 oC) VF: Typ.= 25.2V (I F=15mA, Ta=85 oC) Operating life: Min.=20000 hrs, Typ.=40000 hrs Parameter guideline for LED IF: Max.=20mA VF: Typ.= 28.0V (I F=15mA, Ta=-30 oC) VF: Typ.= 26.8V, Max.=32.0V (I F=15mA, Ta=25 oC) VF: Typ.= 26.1V (I F=15mA, Ta=85 oC) Operating life: Min.=25000 hrs, Typ.=50000 hrs Section 5.2.1 LCD Connecter Manufacture: Hirose or compatible Mating Connecter Model Number: FH12-33S-0.5SH (55) LCD Connecter Manufacture: Starconn or compatible Mating Connecter Model Number: 089H33-000100-G2-R Section 7.1 Backlight Connecter Manufacture: JST or compatible Connecter Model Number: SHLP-06V-S-B or compatible Pin #4 color: Blue Pin #5 color: White Backlight Connecter Manufacture: STM or compatible Connecter Model Number: P24021P6 or compatible Pin #4 color: White Pin #5 color: Blue Section 7.2 1.0, Jun.19, 2008 Carton Package Max. capacity: No definition Max. weight: No definition Carton Package Max. capacity: 60 pcs TFT-LCD module per carton Max. weight: 12.65 Kg per carton Section 10.2
G057QN01 V0 Ver. 1.0 G057QN01 V0 1. Operating Precautions 1) Display area (Polarizer) of TFT-LCD Module is ea sily to be damaged, please be cautious and not to scratch it. 2) Be sure to power off your machine before connect ing or disconnecting your signal cable to TFT-LCD Module. 3) Wipe off water drop on display area immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) Display area (Glass) of TFT-LCD Module may be br oken or cracked if bump Module against hard object. 6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. 7) Do not open nor modify the TFT-LCD module assemb ly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if TFT-LCD module has to be put back int o the packing container slot after it was taken out from the container, do not press the center of the LED Reflector edge. Instead, press at the far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged. 10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module. 11) TFT-LCD Module is not allowed to be twisted & b ent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. 12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in diff erent luminance, response time. 14) Continuous operating TFT-LCD Module under high temperature environment may accelerate LED light bar exhaustion and reduce luminance dramatically. 15) The data on this specification sheet is applica ble when TFT-LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen.
G057QN01 V0 Ver. 1.0 G057QN01 V0 2. General Description G057QN01 V0 is designed for industrial display appl ications with QVGA (320 x RGB x 240) resolution and 262k colors (RGB 6-bits). It is comp osed of a TFT-LCD panel, driver ICs, control and power supply circuits board and backlight unit. G05 7QN01 V0 offers CMOS interface for display signal input. LED driving board for backlight unit is not included.
2.1 Display Characteristics
The following items are G057QN01 V0 characteristics summary at 25 ℃ (Room Temperature). Items Unit Specifications Screen Diagonal inch 5.7 Active Area mm 115.2(H) x 86.4(V) Pixels H x V 320 x 3(RGB) x 240 Pixel Pitch mm 0.36 x 0.36 Pixel Arrangement R.G.B. Vertical Stripe Display Mode TN, Normally White Nominal Input Voltage VDD Volt 3.3 typ. Typical Power Consumption Watt 1.57W (LCD:0.37W/LED BLU: 1.2W) All black pattern Weight Grams 155g (typ.), 170g (max.) Physical Size mm 144.0(H)x 104.6(V) x 12.3(D) (typ.) Electrical Interface CMOS 6-bit Parallel RGB Surface Treatment Anti-Glare, Hardness 3H Support Color 262K colors The most suitable view angle 12 o’clock Temperature Range Operating Storage (Non-Operating) oC oC -30 to +85 -30 to +85 RoHS Compliance RoHS Compliance
G057QN01 V0 Ver. 1.0 G057QN01 V0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 ℃ (Room Temperature). Item Unit Conditions Min. Typ. Max. Remark White Luminance cd/m2 IF= 15mA / 1 LED line (center point) 300 400 - Note 1 Uniformity % 5 Points - 1.3 Note 1, 2, 3 Contrast Ratio 500 800 - Note 4 msec Rising - 15 20 msec Falling - 10 15 Response Time msec Rising + Falling - 25 35 Note 5 degree degree Horizontal (Right) CR = 10 (Left) Viewing Angle degree degree Vertical (Upper) CR = 10 (Lower) Note 6 White x 0.263 0.313 0.363 White y 0.279 0.329 0.379 Red x 0.510 0.560 0.610 Red y 0.280 0.330 0.380 Green x 0.275 0.325 0.375 Green y 0.535 0.585 0.635 Blue x 0.100 0.150 0.200 Color / Chromaticity Coordinates (CIE 1931) Blue y 0.055 0.105 0.155 Color Gamut % - 50 - Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digi tal Voltmeter, Luminance meter (SR_3 or equivalent) Aperture 1 with 50cm viewing distance∘ Test Point Center Environment < 1 lux LCD Module SR_3 or equivalent measuring distance Module Driving Equipment
G057QN01 V0 Ver. 1.0 G057QN01 V0 Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H)) 1 2 4 5 H /4 H /4 H /4 H /4 H W W /4 W /4 W /4 W /4 Note 3: The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition. Note 4: Definition of contrast ratio (CR): Note 5: Definition of response time: The output signals of photo detector are measured w hen the input signals are changed from “White” to “ Black” (falling time) and from “Black” to “White” (rising time), re spectively. The response time interval definition is between 10% and 90% of amplitude. Please refer to the figure as below. Maximum Brightness of five points δ W5 = Minimum Brightness of five points Contrast ratio (CR) = Brightness @ “White” state Brightness @ “Black” state 100 Optical response White Black White Tf Tr Optical response White Black White Tr
G057QN01 V0 Ver. 1.0 G057QN01 V0 Note 6: Definition of viewing angle Viewing angle is the measurement of contrast ratio ≧ 10, at the screen center, over 180° horizontal and 180° vertical range. The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure. 3. Functional Block Diagram The following diagram shows the functional block of the G057QN01 V0 color TFT/LCD module.
G057QN01 V0 Ver. 1.0 G057QN01 V0 4. Absolute Maximum Ratings
4.1 Absolute Ratings
Item Symbol Min Max Unit Remark Logic/LCD Drive Voltage VDD -0.3 +3.6 Volt LED Forward Current I F 0 20 mA LED Reverse Voltage V R - 5 Volt LED Reverse Current I R - 100 μ A For each channel LED
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit Remark Operating Temperature TOP -30 +85 ℃ Note 1, 2 Operation Humidity HOP 5 95 %RH Note 1, 2 Storage Temperature TST -30 +85 ℃ Note 1 Storage Humidity HST 5 95 %RH Note 1 Note 1: Maximum Wet-Bulb should be 39 and no conden sa℃ tion. Note 2: Only operation is guaranteed. Optical perfo rmance should be evaluated at 25 ℃ only.
G057QN01 V0 Ver. 1.0 G057QN01 V0 5. Electrical Characteristics
5.1 TFT-LCD Driving
5.1.1 Power Specification
Parameter Min Typ Max Units Remark VDD Logic/LCD Drive Voltage 3.0 3.3 3.6 Volt IDD VDD Current - 115 130 mA All Black Pattern (VDD=3.3V, at 60Hz) Irush LCD Inrush Current - - 1.5 A Note 1 PDD VDD Power - 0.37 0.43 Watt All Black Pattern (VDD=3.3V, at 60Hz) VDDrp Allowable Logic/LCD Drive Ripple Voltage - - 100 mVp-p All Black Pattern (VDD=3.3V, at 60Hz) Note 1: Measurement condition: AO6402 G D2 S AO6402 G D2 S 1uF/16V 1uF/25V 0.01uF/25V VR1 47K +12.0V VCC SW1 SW MAG-SPST 1 2 (High to Low) Control Signal (LCD Module Input) +3.3V 47K 90% 10% VDD rising time 3.3V 0.5ms VDD
G057QN01 V0 Ver. 1.0 G057QN01 V0
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Parameter Symbol Min. Typ. Max. Unit Remarks High VIH 0.7VDD - VDD Volt Logic Input Voltage for Display Signals Low VIL 0 - 0.3VDD Volt High VIH 0.7VDD - VDD Volt Input Voltage for RL/UD Low VIL 0 - 0.3VDD Volt
5.2 Backlight Unit Driving
5.2.1 Parameter guideline for LED
Following characteristics are measured under stable condition using a LED driving board at 25 (Ro ℃ om Temperature). Symbol Parameter Min Typ Max Unit Remark IF LED Forward Current - 15 20 mA Ta = 25 oC - 28.0 - Volt I F = 15mA, Ta = -30 oC - 26.8 32 Volt I F = 15mA, Ta = 25 oC VF LED Forward Voltage - 26.1 - Volt I F = 15mA, Ta = 85 oC PLED LED Power - 1.2 - Watt Operating Life 25000 50000 Hrs I F = 15mA, Ta = 25 oC Note 1: Ta means ambient temperature of TFT-LCD module. Note 2: I F, V F are defined for one channel LED. There are total t hree LED channels (AN1-CA1, AN2-CA2, AN3-CA3) in back light unit. See Section 6.6 for LED Backlight Unit Interface Signal Description. Note 3: If G057QN01 V0 module is driven by high cur rent or at high ambient temperature & humidity cond ition. The operating life will be reduced. Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
G057QN01 V0 Ver. 1.0 G057QN01 V0 6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan. Note 1: TFT-LCD interface signal description is shown in section 6.4.
G057QN01 V0 Ver. 1.0 G057QN01 V0
6.3 The Input Data Format
This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates the display of input data.
G057QN01 V0 Ver. 1.0 G057QN01 V0
6.4 TFT- LCD Interface Signal Description
Note 1: “Low” stands for 0V. “High” stands for 3.3V . “NC” stands for ”No Connection”.
G057QN01 V0 Ver. 1.0 G057QN01 V0
6.5 TFT- LCD Interface Timing
6.5.1 Timing Characteristics
Min. Typ. Max. Unit Remark Clock frequency (DOTCLK) 1/ T CLOCK 6.2 6.4 12.1 MHz Note1 Period T H 406 408 560 Active T HD 320 Horizontal Section Blanking T HB 86 88 240 TCLOCK Note1 Period T V 254 263 360 Active T VD 240 Vertical Section Blanking T VB 14 23 120 TLINE Note1 Note 1: Recommended frame rate is 60 Hz.
6.5.2 Input Timing Diagram
Input Timing Definition ( DE Mode) TCLOCK Input Data Pixel Pixel Pixel Pixel N-1 Pixel N Invaild Data Invaild Data Pixel
G057QN01 V0 Ver. 1.0 G057QN01 V0
6.6 LED Backlight Unit Interface Signal Description
Pin # Symbol Pin Description
1 AN1 Channel 1 LED anode
2 AN2 Channel 2 LED anode
3 AN3 Channel 3 LED anode
4 CA1 Channel 1 LED cathode
5 CA2 Channel 2 LED cathode
6 CA3 Channel 3 LED cathode
6.7 Power ON/OFF Sequence
VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power ON/OFF sequence timing Value Parameter Min. Typ. Max. Units T1 0.5 - 10 ms T2 0 - 50 ms T3 0 - 50 ms T4 0 - 10 ms T5 200 - - ms T6 200 - - ms T7 500 - - ms ON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.
G057QN01 V0 Ver. 1.0 G057QN01 V0 7. Connector & Pin Assignment
7.1 TFT- LCD Signal (CN1): LCD Connector
Manufacturer Starconn or compatible Mating Connecter Model Number 089H33-000100-G2-R or compatible Pin# Symbol Pin# Symbol Pin# Symbol
1 GND 12 GND 23 B3
2 DOTCLK 13 G0 24 B4
3 NC 14 G1 25 B5
4 NC 15 G2 26 GND
5 GND 16 G3 27 DE
6 R0 17 G4 28 VDD
7 R1 18 G5 29 VDD
8 R2 19 GND 30 R/L
9 R3 20 B0 31 U/D
10 R4 21 B1 32 NC
11 R5 22 B2 33 GND
7.2 LED Backlight Unit (CN2): Backlight Connector
Manufacturer STM or compatible Connector Model Number P24021P6 or compatible Mating Connecter Model Number SM06B-SHLS-TF or compatible Pin # Symbol Cable color Pin # Symbol Cable color
1 AN1 Red 4 CA1 White
2 AN2 Red 5 CA2 Blue
3 AN3 Red 6 CA3 Black
G057QN01 V0 Ver. 1.0 G057QN01 V0
7.3 PIN 1 definition of CN1 and CN2
- Reliability Test Criteria Items Required Condition Remark Temperature Humidity Bias 40 /90%,300Hr℃ Note 2 High Temperature Operation 85 ,300Hr℃ Note 2 Low Temperature Operation -30 ,300Hr℃ Note 2 High Temperature Storage 85 ,300 hours℃ Note 2 Low Temperature Storage -30 ℃ ,300 hours Note 2 Thermal Shock Test -20 ℃ /30 min ,60 ℃ /30 min ,100cycles Note 2 Hot Start Test 85 ℃ /1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Cold Start Test -30 ℃ /1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Shock Test (Non-Operating) 50G,20ms,Half-sine wave, (±X, ±Y, ±Z) Note 2 Vibration Test (Non-Operating) 1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z) Note 2 ESD Contact Discharge: ±8KV, 150pF(330 Ω) 1sec, 8 points, 25 times/point Air Discharge: ±15KV, 150pF(330 Ω) 1sec, 8 points, 25 times/point Note 1,2 Attitude Test Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs Note 2 Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module is self-recoverable, no data lost and no hardware failures after test.
G057QN01 V0 Ver. 1.0 G057QN01 V0 Note2: /circle6 Water condensation is not allowed for each test it ems. /circle6 Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. /circle6 The reliability test is performed only to examine the TFT-LCD module capability. /circle6 To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidi ty for 24 hours at least in advance.
G057QN01 V0 Ver. 1.0 G057QN01 V0 9. Mechanical Characteristics
G057QN01 V0 Ver. 1.0 G057QN01 V0 10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
10.2 Carton Package
Max. capacity: 60 pieces TFT-LCD module per carton Max. weight: 12.65 kg per carton Outside dimension of carton: 520(L)mm* 340(W)mm* 25 0(H)mm
G057QN01 V0 Ver. 1.0 G057QN01 V0
11 Safety
11.1 Keen Edge Requirements
There will be no keen edges or corners on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhe re in the TFT-LCD module. If toxic materials are us ed, they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD Module will complete the flammability rating exception approval process. The printed circuit board will be made from materia l rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board.
11.3 Capacitors
If any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being inserted backwards.
11.4 National Test Lab Requirement
The TFT-LCD Module will satisfy all requirements fo r compliance to UL 60950 (U.S.A. Information Techno logy Equipment).