EDS2026-001 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS2026-001 Page 1 of 2 EUR PA Product Ranges EUCP1, EUCP2, EUCP3 Standard(s) IEC 60898, EN 60898 Characteristic Curves D Rated Current (In) 1, 2, 4, 6, 10, 16, 20, 25, 32, 40, 50 & 63A Rated Voltage (Ue) AC 230(240)/400(415)V Rated Frequency 50/60Hz Rated impulse withstand Voltage (Uimp) 4kV Energy Limiting Class 3 Number of Poles 1, 2 & 3 Rated Short-Circuit Capacity (Icn) 10kA Operating Temperature -5° to 40°C* Altitude Not exceeding 2000 metres Humidity Not exceeding 50% at 40°C and 90% at 20°C Pollution Degree 2 Overvoltage Category III Terminal protection IP20 Mounting 35mm DIN Rai Terminal Type Tunnel Terminal Capacity 1.0-25mm² Recommended Terminal Torque 2.0Nm MCB EUCP1, EUCP2, EUCP3 D Curve 1, 2 & 3 Pole 10kA
Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS2026-001 Page 2 of 2 EUR PA MCB EUCP1, EUCP2, EUCP3 D Curve 1, 2 & 3 Pole 10kA