EDS1257-004 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europacomponents.com www.europa-plc.com Data Sheet EDS1257-004 Page 1 of 2 EUR PA Type A Product Range EUBLMC Standard(s) IEC 61009-1, EN 61009-1 Characteristic Curve B, C Rated Current (In) 6, 16, 20, 32 & 40A Rated Residual Operating Current IΔn 30mA Standard Tripping Time 1 x IΔn ≤ 300ms Standard Tripping Time 5 x IΔn ≤ 40ms Rated Voltage (Ue) AC 230(240)V Rated Frequency 50/60Hz Rated impulse withstand Voltage (Uimp) 4kV Number of Poles 2 Rated Short-Circuit Capacity (Icn) 10kA Operating Temperature -25° to 40°C* Altitude Not exceeding 2000 metres Humidity Not exceeding 50% at 40°C and 90% at 20°C Pollution Degree 2 Terminal protection IP20 Mounting 35mm DIN Rail Terminal Type Pillar Terminal Capacity 1.0-16mm² Recommended Terminal Torque 2.0Nm RCBO EUBLMC 1 Pole + Sw Neutral (2 Pole) 10kA Type A * average not exceeding 35°C over a 24 hour period Part Number Breakdown E CMLBU 3 0 A Current (A): 6/16/20/32/40 Curve: B/C 30mA Type A All 2 Module RCBOs are bi-directional, and therefore are suitable for use within installations which include Solar PV systems, as well as within EV charging applications where Vehicle to Home (V2H) is required.
Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europacomponents.com www.europa-plc.com Data Sheet EDS1257-004 Page 2 of 2 EUR PA Note: Type A is suitable for Type AC applications. Type A is suitable where any smooth DC fault current is less than 6mA