EUB1

EDS1258-002 EUROPA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fi t for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be checked periodically to ensure correct tightness. Important Safety Notice DO NOT USE POWER TOOLS ON THESE PRODUCTS Dimensions Technical Data: Metal Clad Garage Units B B D A F P 106-120 E A DBBBC CG G J 6,5 F EDS1258-002Page 1 of 1 Europa House, Airport Way, Luton, Beds, LU2 9NH Tel: 01582 692 440 / Fax: 01582 692 450 e-mail: sales@europacomponents.com website: http://www.europacomponents.com Technical Data: Metal Clad Garage Units Dimensions 160 240 40 40 20 DIA. 25 DIA. 105 110 168 5.7 DIA. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be checked periodically to ensure correct tightness. Important Safety Notice DO NOT USE POWER TOOLS ON THESE PRODUCTS Technical Data

• IP54 Enclosure
• Amendment 3 Compliant
• Earth and neutral terminals provided
• Epoxy powder coated RAL 7035 NOTE: Total load not to exceed the rating of the main switch.
• GRG16M: 63A RCCB + 6A & 16A MCB
• GRG32M: 63A RCCB + 6A & 32A MCB
• GRGISOM: Fitted with 100A Mainswitch | Space for up to 3 MCCBs / RCBOs
• GRG5M: 5 Module Empty Enclosure B B D A F P 106-120 E A DBBBC CG G J 6,5 F EDS1258-002Page 1 of 1 Europa House, Airport Way, Luton, Beds, LU2 9NH Tel: 01582 692 440 / Fax: 01582 692 450 e-mail: sales@europacomponents.com website: http://www.europacomponents.com Technical Data: Metal Clad Garage Units Dimensions 160 240 40 40 20 DIA. 25 DIA. 105 110 168 5.7 DIA. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be checked periodically to ensure correct tightness. Important Safety Notice DO NOT USE POWER TOOLS ON THESE PRODUCTS Technical Data
• IP54 Enclosure
• Amendment 3 Compliant
• Earth and neutral terminals provided
• Epoxy powder coated RAL 7035 NOTE: Total load not to exceed the rating of the main switch.
• GRG16M: 63A RCCB + 6A & 16A MCB
• GRG32M: 63A RCCB + 6A & 32A MCB
• GRGISOM: Fitted with 100A Mainswitch | Space for up to 3 MCCBs / RCBOs
• GRG5M: 5 Module Empty Enclosure Technical Data
• IP54
• Amendment 3 Compliant
• Earth and neutral terminals provided
• Epoxy powder coated RAL 7035 Additional Technical Data
• GRG16M: 63A RCCB + 6A & 16A MCB
• GRG32M: 63A RCCB + 6A & 32A MCB
• GRGISOM: Fitted with 100A Mainswitch | Space for up to 3 MCBs / RCBOs
• GRG5M: 5 Module Empty Enclosure GRG5M

Technical Data: Metal Clad Garage Units MCB UB1 B & C Curve 1 Pole 6kA Product Range EUB1 Standard (s) IEC 60898, EN 60898 Certifi cation CE, SEMKO Characteristics Curves B,C Rated Current (In) 6, 10, 16, 20, 25, 32, 40, 50 & 63A Rated Voltage (Ue) AC 230(240) Rated Frequency 50/60Hz Rated impulse withstand Voltage (Uimp) 4kV Energy Limiting Class 3 Number of Poles 1 Rated Short-Circuit Capacity (Icn) 6kA Operating Temperature -5° to 40°C* Altitude Not exceeding 2000 metres Humidity Not exceeding 50% at 40°C and 90% at 20°C Pollution Degree 2 Overvoltage Category III Terminal protection IP20 Mounting 35mm DIN Rail Terminal Type Tunnel Terminal Capacity 1.0-25mm² Recommended Terminal Torque 2.0Nm * Average not exceeding 35°C over a 24 hour period Page 2 of 2 EDS1064-001 Technical Data: MCB EUB1 B & C Curve 1 Pole 6kA B Curve C Curve t (s) I (In) I (In) 1000 5000 2000 1000 500 200 100 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001 0.5 1 2 3 4 5 7 10 20 30 50 70 100 200 1000 5000 2000 1000 500 200 100 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001 0.5 1 2 3 4 5 7 10 20 30 50 70 100 200 t (s) EUB1_Layout 1 31/10/2013 11:44 Page 2 Page 2 of 2 EDS1064-001 Technical Data: MCB EUB1 B & C Curve 1 Pole 6kA B Curve C Curve t (s) I (In) I (In) 1000 5000 2000 1000 500 200 100 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001 0.5 1 2 3 4 5 7 10 20 30 50 70 100 200 1000 5000 2000 1000 500 200 100 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001 0.5 1 2 3 4 5 7 10 20 30 50 70 100 200 t (s) EUB1_Layout 1 31/10/2013 11:44 Page 2

Technical Data: Metal Clad Garage Units Product Range EUR1 Standard (s) IEC 61008, EN 61008 Type AC & A ** Certifi cation CE, SEMKO Rated Current (In) 25, 40, 63, 80A Rated Residual Operating Current IΔn 30mA, 100mA Standard Tripping Time 1 x IΔn ≤ 300ms Standard Tripping Time 5 x IΔn ≤ 40ms Rated Voltage (Ue) AC 230(240)/400(415)V Rated Frequency 50/60Hz Rated impulse withstand Voltage (Uimp) 4kV Number of Poles 4 Rated Short-Circuit Capacity (inc) 10kA Operating Temperature -5° to 40°C* Altitude Not exceeding 2000 metres Humidity Not exceeding 50% at 40°C and 90% at 20°C Pollution Degree 2 Terminal Protection IP20 Mounting 35mm DIN Rail Terminal Type Tunnel Terminal Capacity 1.5-25mm² Recommended Terminal Torque 2.0Nm RCCB EUR1 2 & 4 Pole 10kA * Average not exceeding 35°C over a 24 hour period ** Only available in 2 pole 30mA Product Range ISO63-2 & ISO-100-2 Standard (s) IEC60947-3, EN 60947-3 Certifi cation CE, SEMKO Rated Current (In) 63 & 100A Rated Uniterupted Current (Iu) 63 & 100A Rated Operational Voltage (Ue) AC 230(240)/400(415)V Rated Frequency 50/60Hz Rated impulse withstand Voltage (Uimp) 6kV Number of Poles 2 Rated Insulation Voltage (Ui) 500V Utilization Category AC-22B Operating Temperature -5° to 40°C* Altitude Not exceeding 2000 metres Humidity Not exceeding 50% at 40°C and 90% at 20°C Pollution Degree 3 Terminal protection IP20 Mounting 35mm DIN Rail Terminal Type Tunnel Terminal Capacity 2.5-35mm² Recommended Terminal Torque 2.0Nm Mainswitch / isolator ISO63-2 & ISO100-2 2 Pole Europa House, Airport Way, Luton, Beds, LU2 9NH Tel: 01582 692 440 / Fax: 01582 692 450 Email: sales@europacomponents.com Website: http://wwweuropacomponents.com