ETN ATC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Automatic Timing & Controls 800.727.5646 atcdiversified.com TIME DELAY RELAYS ETN Series Solid-State Flasher DIMENSIONS (INCHES) SPECIFICATIONS TIMING ACTION Flasher, 50% Duty Cycle TIMING RANGE Factory Fixed, (45-150) Flashes per minute ±20% OUTPUT RATING 1 A Resistive 10 A Maximum (Inrush) (Fullwave) 40 mA Minimum (Hold in Current)
2.5 Volt Drop @ 1 A
3 A Resistive 10 A Maximum (Inrush)
(Halfwave) 40mA Minimum (Hold in Current)
1.1 Volt Drop @ 3 Amp
SUPPLY VOLTAGE 120 VAC; ± 15%, 50/60 Hertz TERMINATIONS (2) 6 inch wires, 18 AWG, 300 Volt TEMPERATURE Operate -4° to 140°F (-20° to +60°C) Free Air RATING Storage -40° to 185°F (-40° to +85°C) MOUNTING No. 8 or No. 10 Screw ENCLOSURE Polycarbonate Case, Totally Encapsulated for Environmental Protection WEIGHT 0.1 lbs. When supply voltage is applied, the OFF delay (T1) begins. Upon completion of the OFF delay, the load energizes and the ON delay (T2) begins. Upon completion of the ON delay, the load de-energizes and one cycle is complete. This ON/OFF cycling continues until the supply voltage is removed. The OFF delay always equals the ON delay.
- Totally Solid-state
- 2-Wire Leads (Series Connection with Load)
- Totally Encapsulated Circuitry
- Molded Case with Built-In Mounting Feature
- High Inrush Capability
- Low Cost
- 1 Amp (Fullwave) and 3 Amp (halfwave) versions MODEL NUMBER MODEL NUMBER ETN 120 F T 75 VOLTAGE
120 Volts 120
3 Amp Halfwave H
75 Flashes/minute (Standard) 75
Contact factory for other flashing rates E55826 Automatic Timing & Controls 800.727.5646 atcdiversified.com