EC5911 E-CMOS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- Single-Supply Operation from +2.5V ~ +5.5V
- Rail-to-Rail Input / Output
- Gain-Bandwidth Product: 200MHz (Typ.)
- Low Input Bias Current: 10pA (Typ.)
- Low Offset Voltage: 5mV (Max.)
- Quiescent Current: 2.8mA (Typ.)
- Operating Temperature: -40°C ~ +125°C
- Available in SOT23-5 and SOP8 Packages
Applications
- Portable Equipment
- Mobile Communications
- Smoke Detector
- Sensor interface
- Medical Instrumentation
- Handheld Test Equipment
- imaging / video Pin Assignments
Figure 1. Pin Assignment Diagram (SOT23-5 and SOP8 Package)
200MHz, High-Speed, CMOS, Rail-to-Rail Operational Amplifier EC5911
Ordering Information
Part Number Package Marking Marking Information EC5911NNB2R SOT23-5L 911YW 1. Y：Year code(D=2013;E=2014;F=2015…) 2. W：Week Code( The big character of A~Z is for the week of 1~26, and small a~z is for the week of 27~52. EC5911NNM1R SOP-8L EC5911 LLLLL YYWWT 1. LLLLL：Last five Number of Lot No 2. YY：Year Code 3. WW：Week Code 4. T：Internal Tracking Code Absolute Maximum Ratings Note: Stress greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions outside those indicated in the operational sections of this specification are not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Condition Min Max Power Supply Voltage (VDD to Vss) -0.5V +7V Analog Input Voltage (IN+ or IN-) Vss-0.5V VDD+0.5V PDB Input Voltage Vss-0.5V +7V Operating Temperature Range -40°C +125°C Junction Temperature +150°C Storage Temperature Range -65°C +150°C Lead Temperature (soldering, 10sec) +300°C Package Thermal Resistance (TA=+25°C) SOT23-5, θJA 190°C SOP8, θJA 130°C EC5911NN XX X B2：SOT23-5L M1：SOP-8L
200MHz, High-Speed, CMOS, Rail-to-Rail Operational Amplifier EC5911 Electrical Characteristic (VDD = +5V, Vss = 0V, VCM = 0V, VOUT = VDD/2, RL=100K tied to VDD/2, SHDNB = VDD, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA =+25°C.) (Notes 1,2) Parameter Symbol Conditions Min. Typ. Max. Units Supply-Voltage Range VDD Guaranteed by the PSRR test 2.5 - 5.5 V Quiescent Supply Current (per Amplifier) VDD = 5V - 2.8 3.3 mA Input Offset Voltage VOS TA=25°C - 1 - mV TA=-40°C~+85°C - 8 - Input Offset Voltage Tempco ΔVOS/ΔT - 2 - μV/°C Input Bias Current IB (Note 3) - 10 100 pA Input Offset Current IOS (Note 3) - 10 100 pA Input Common-Mode Voltage Range VCM Guaranteed by the TA = 25C CMRR test, TA = -40C ~ +125C -0.1 - VDD+0.1.5 V Common-Mode Rejection Ratio CMRR Vss-0.1VVCMVDD+0.1V TA = 25C - 75 - dB Vss≤VCM≤5VDD TA = 25C 72 90 - Vss-0.1VVCMVDD+0.1V - 68 - Power-Supply Rejection Ratio PSRR VDD = +2.5V to +5.5V 75 90 - dB Open-Loop Voltage Gain AV RL = 10k to VDD/2 VOUT = 100mV to VDD-125mV 90 100 - dB RL = 1k to VDD/2 VOUT = 200mV to VDD-250mV 80 95 - RL = 500 to VDD/2 VOUT = 350mV to VDD-500mV 70 80 - Output Voltage Swing VOUT |VIN+-VIN-| 10mV VDD-VOH - 10 30 mV RL = 10k to VDD/2 VOL-VSS - 10 35 |VIN+-VIN-| 10mV VDD-VOH - 80 50 RL = 1k to VDD/2 VOL-VSS - 30 50 |VIN+-VIN-| 10mV VDD-VOH - 100 140 RL = 500 to VDD/2 VOL-VSS - 100 140 Output Short-Circuit Current ISC Sinking or Sourcing - 100 - mA Gain Bandwidth Product GBW AV = +1V/V - 200 - MHz Slew Rate SR AV = +1V/V - 125 - V/μs
200MHz, High-Speed, CMOS, Rail-to-Rail Operational Amplifier EC5911 Electrical Characteristic Note 1: All devices are 100% production tested at TA = +25°C; all specifications over the automotive temperature range is guaranteed by design, not production tested. Note 2: Parameter is guaranteed by design. Note 3: Peak-to-peak input noise voltage is defined as six times rms value of input noise voltage. Parameter Symbol Conditions Min. Typ. Max. Units Differential Phase error (NTSC) DP G=2,RL=150Ω - 0.03 - deg Differential Gain error (NTSC) DG G=2,RL=150Ω - 0.09 - dB Settling Time tS To 0.01%, VOUT = 2V step AV = +1V/V - 52 - μs Over Load Recovery Time VIN Gain=VS - 2 - μs Input Voltage Noise Density en ƒ = 1kHz - 15 - nV/Hz ƒ = 30kHz - 13 - Input Current Noise Density in ƒ = 1kHz - 400 - fA/Hz Total Harmonic Distortion plus Noise THD+N ƒC=5MHZ,VOUT=2Vp-p,G=+2 - -60 - dB
200MHz, High-Speed, CMOS, Rail-to-Rail Operational Amplifier EC5911
Package Information
200MHz, High-Speed, CMOS, Rail-to-Rail Operational Amplifier EC5911 SOP8