E3630A KEYSIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Non-programmable DC Power Supplies Data Sheet
Affordable, Full-Featured Benchtop Power Supplies Provide Excellent Performance and Flexibility Smooth turn-on and turn-off transitions keep power spikes out of your circuits. Auto-tracking permits equal or proportional voltage sharing, and allows control of output voltage from one master unit. The master and slave supplies have the same output polarity with respect to a common bus or ground. This operation is useful where simultaneous turn-up, turn-down or proportional control of all power supplies is required. E3620A dual-output power supply The 50-watt E3620A dual-output power supply provides two 0 V to 25 Vdc outputs with the maximum current of 1 A to satisfy most bench requirements. The outputs are completely independent and isolated. E3630A triple-output power supply with auto-tracking feature The 35-watt E3630A triple-output power supply provides three DC outputs: 0 to 6 V with a maximum current of 1 to 2.5 A and 0 to 20 V and 0 to %20 V with a maximum current of 0.5 A. An auto-tracking feature lets you use one voltage control to adjust the +20 V and %20 V outputs simultane - ously. The outputs track each other to within 1 percent, making it easy to adjust the power supply for circuits requiring balanced voltages. Multiple-output non-programmable models The Keysight Technologies, Inc. E3620A and E3630A low-cost benchtop power supplies give you the performance of system power supplies at a decent price. Both supplies provide clean power with excellent regulation and a fast transient response. With multiple supplies in a compact unit, the E3620A and E3630A provide excellent performance while saving space on your bench. Both instruments feature a tight 0.01 percent line and load regulation and a low normal mode noise specification of less than 0.35 mV to ensure clean power for precision circuitry. With a common mode current specification of less than 1 μA, both multiple-output power supplies minimize the power line current injection. The E3620A and E3630A feature separate digital panel meters so you can monitor the voltage and current simultaneously. They also protect your DUT against overload and short-circuit damage. 02 | Keysight | E3620A and E3630A Non-programmable DC Power Supplies – Data Sheet Reliable Power, Repeatable Results – Linear power supply – Dual or triple output – 10-turn voltage and current control – Low noise and excellent regulation
Features Isolated dual outputs, 10 turn pots CV, CL Tracking, CV, CL (± 20 V) CV, CF (+6 V) Number of outputs 2 3 Number of output ranges 1 1 DC output rating 25 V, 1 A
25 V, 1 A
+6 V, 2.5 A +20 V, 0.5 A –20 V, 0.5 A Load and line regulation < 0.01% + 2 mV Ripple and Noise (20 Hz to 20 MHz) Normal mode voltage < 350 μVrms, < 1.5 mVpp Normal mode current – Common mode current < 1 μArms Transient response time < 50 μsec following a change in output current from full load to half load for output to recover within: 15 mV Meter accuracy ± 0.5% + 2 counts at 25 ºC ± 5 ºC Meter resolution Voltage 10 mV (0–20 V), 100 mV (> 20 V) 10 mV Current 1 mA 10 mA Isolation 240 Vdc 03 | Keysight | E3620A and E3630A Non-programmable DC Power Supplies – Data Sheet
Ordering information
E3620A Dual-output power supply E3630A Triple-output power supply Standard shipped accessories Product reference CD, power cord Power options Opt. 0E3 230 Vac ± 10% Opt. 0EM 115 Vac ± 10% Opt. 0E9 100 Vac ± 10% Rackmount kits* E3620A To rackmount two instruments side-by-side – Lock-link Kit (P/N 5061-9694) – Flange Kit (P/N 5063-9212) or 34191A To rackmount one or two instruments in a sliding support shelf – Support Shelf (P/N 5063-9255) – Slide Kit (P/N 1494-0015) required for support shelf For a single instrument, also order filler panel (P/N 5002-3999) * Rackmounting with 1CM or lock-link/flange kit requires – Keysight or customer support rails – Keysight Support Rails-E3663AC. Supplemental Characteristics E3620A E3630A Control mode CV/CL CV/CL (± 20 V) CV/CF (+ 6 V) Temperature coefficient per ºC Voltage < 0.02% + 1 mV Current – Output Drift Voltage Less than 0.1% + 5 mV total drift for 8 hours after initial warm-up of 30 minutes Current N/A Temperature range Derate output current 50% between 40 ºC to 55 ºC Cooling Convection cooling Isolation ± 240 Vdc AC Input 100 Vac ± 10%, 47–63 Hz (opt. 0E9)
115 Vac ± 10%, 47–63 Hz (std)
230 Vac ± 10%, 47–63 Hz (0E3)
Size 88.1 mm H x 212.3 mm W x 392.4 mm D 3.5” H x 8.4” W x 15.4” D 88.1 mm H x 212.3 mm W x 318.4 mm D 3.5” H x 8.4” W x 12.5” D Warranty Three year for E3600 Series power supplies Three months for standard shipped accessories Product regulation Certified to CSA 22.2 No. 231; conforms to IEC 1010-1; carries CE mark; complies with CISPR-11, Group 1, Class A, KC South Korean EMC Mark, Canadian ICES/NMB-001, Australian C Tick Mark Other options Opt. 1CM or 34190A rackmount kit* (Only applicable for E3620A) Opt. UK6 Commercial calibration certificate with test result data E3600A-100 Test lead kit Manual sets Please visit www.keysight.com/find/manuals for the latest revisions of manuals. 04 | Keysight | E3620A and E3630A Non-programmable DC Power Supplies – Data Sheet
For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 0124 229 2010 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-02-06-15) myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. This information is subject to change without notice. © Keysight Technologies, 2009 - 2014 Published in USA, August 4, 2014 5968-9727EN www.keysight.com 05 | Keysight | E3620A and E3630A Non-programmable DC Power Supplies – Data Sheet