E1476A KEYSIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- 1-Slot, C-size, register based
- Low-thermal offset relay <2 µV
- 64 channels of temperature with compensation
- 64 channels of voltage - 3-wire high, low, and guard
- 64 channels 2-wire and 32 channels 4-wire resistances
- Includes QUIC easy-to-use terminal block
Description
The Agilent E1476A High-Density Reed Relay Multiplexer is a C-size, 1-slot, register-based VXI module. This low-offset, thermocouple compensated multiplexer is dynamically confi gurable providing 64 chan- nels of two-, three- or four-wire (32 channels) of switching. This multiplexer module consists of a component card with switches and a QUIC spring clamp termi- nal block that plugs onto the component card. The E1476A is ideal for applications needing a relay multiplexer that is dynami- cally confi gurable, and makes maximum high-quality, high-point count measurements. High-integrity voltage meas- urements are possible with three-wire high, low, and guard switching. In addition to making two-wire resistance and precision four-wire resistance measure- ments, you can make up to 64 channels of thermocouple temperature measurements with automatic cold junction compensation. Refer to the Agilent Technologies Website for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable. Temperature Measurements The reference thermistor is also accessible by both banks, each bank having a control switch allowing for either a two-wire or four-wire resistance measure- ment of the 5000 Ω reference thermistor mounted on the isothermal plane located in the terminal block. Using a scanning multimeter confi guration, the channel relays and fi ve control relays are programmed by SCPI commands or by register read/ writes. SCPI command syntax to make a temperature scan of K type thermocouples is: MEAS:TEMP? TC, K, (@100:163)
Confi guration Each of the 64 channels provides separate high, low, and guard connections, all easily accessible via the quick connect screwless terminals on the companion terminal block. The multiplexer is organized in two banks of 32 with each bank having its own voltage sense control switch and one bank having a current source control switch. This dual bank confi guration makes it possible to use half the channels as sense channels, while the other half are used as current source channels, thus obtaining 32 four-wire mea- surement channels, each with high, low, and guard connections. One 6 cm (2.5-in) analog bus cable (E1400-61605) is shipped with each module to allow you to interconnect the E1411B 5.5-digit multimeter to one or more E1476A multiplexers via its front panel analog bus connector. For con- nection to an external voltmeter or other VXI multimeter with conventional front panel con- nectors, access to the analog bus lines is available in the terminal block. This allows you to connect the analog bus signal lines to the multimeter inputs using ordinary hookup wire. Product Specifi cations Input DC: Maximum voltage 120 Vdc (any terminal to any other terminal or chassis): AC rms: Maximum voltage 120 V rms (any terminal to any other terminal or chassis): Maximum current 35 mA (per channel common, non-inductive): Maximum power per channel: 4 VA DC Maximum thermal <4 µV, <2 µV offset per channel, differential Hi-Lo: (10 samples averaged) Closed channel resistance: 100 Ω ±5 Ω Insulation resistance (between any two points): 10E 9 Ω, 40ºC, 95% RH Insulation resistance (Hi to Lo, power off): n/a AC Maximum bandwidth 100 kHz (-3 dB, 50 Ω source/load): Crosstalk (channel-to-channel): 100 kHz: -70 dB
10 MHz: -45 dB
Both: n/a Closed channel capacitance: <175 pf H-L, <300 pf L-G, <1500 pf G-C General Characteristics Relays: Reed relays Break-before-make Power down state: Relays open on power down Power up state: Relays open on power up Minimum relay life: No load: 5 x 10E 9 operations Rated load: 10E 7 operations Reference junction measurement 0.38 °C accuracy (18 to 28 ºC operating): Strain gage excitation: n/a Screw terminal wire size: 22 to 26 AWG (0.5, 0.75, 0.9 mm) Scanning rate: 333 channels/s typ.
General Specifi cations VXI Characteristics VXI device type: Register-based, A16, slave only Size: C Slots: 1 Connectors: P1/2 Shared memory: None VXI busses: None C-size capability: n/a Instrument Drivers See the Agilent Technologies Website http://www.agilent.com/fi nd/inst_drivers for availability and downloading. Command module Downloadable fi rmware: Command module fi rmware rev.: A.06 I-SCPI Win 3.1: Yes I-SCPI Series 700: Yes C-SCPI LynxOS: Yes C-SCPI Series 700: Yes Panel Drivers: Yes VXIplug&play Win Framework: Yes VXIplug&play Win 95/NT Framework: Yes VXIplug&play HP-UX Framework: No Module Current IPM I DM +5 V: 0.1 0.1 +12 V: 0 0 -12 V: 0 0 +24 V: 0 0 -24 V: 0 0 -5.2 V: 0 0 -2 V: 0 0 Cooling Slot Watts/slot: 4.00 ∆P mm H2O: 0.10 Air Flow liter/s: 0.30
Ordering Information
Description Product No. 64-channel 3-wire T/C Relay Multiplexer E1476A Pre-QUIC-type terminal block E1476A 106 Crimp-and-insert terminal block E1476A A3E Service Manual E1476A OB3 Extra pre-QUIC-type terminal block (if ordered seperately) E1476-80000 Extra QUIC-type terminal block (if ordered seperately) E1476-80010 Extra crimp-and-insert terminal block (if ordered seperately) E1476-80011 Notes: ** Crimp-and-insert contacts are not included. Crimp-and-insert contacts order 1252-6533 or ERNI 014728 Crimp-and-insert tools Hand crimp tool 8710-2306 or ERNI 014374 Pin extractor tool 8710-2307 or ERNI 471555 Extra crimp and insert connectors 96 pin connector body 1252-6532 or ERNI 024069 160 pin connector body 1252-6531 or ERNI 024070 Agilent E1476A Circuit Diagram Agilent E1476A terminal block
www.agilent.com For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada (877) 894-4414 Latin America 305 269 7500 United States (800) 829-4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Thailand 1 800 226 008 Europe & Middle East Austria 0820 87 44 11 Belgium 32 (0) 2 404 93 40 Denmark 45 70 13 15 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 € fixed network rates Germany 01805 24 6333 0.14 €/minute Ireland 1890 924 204 Israel 972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 Switzerland (French) 41 (21) 8113811(Opt 2) Switzerland (German) 0800 80 53 53 (Opt 1) United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/find/contactus Revised: October 24, 2007 Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2008 Printed in USA, January 11 2008 5965-5607E www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. www.agilent.com/find/agilentdirect Quickly choose and use your test equipment solutions with confidence. www.agilent.com/find/open Agilent Open simplifies the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. Agilent offers open connectivity for a broad range of system-ready instruments, open industry software, PC-standard I/O and global support, which are combined to more easily integrate test system development. www.lxistandard.org LXI is the LAN-based successor to GPIB, providing faster, more efficient connectivity. Agilent is a founding member of the LXI consortium. Remove all doubt Our repair and calibration services will get your equipment back to you, performing like new, when prom- ised. You will get full value out of your Agilent equipment through- out its lifetime. Your equipment will be serviced by Agilent-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confidence in your measurements. Agilent offers a wide range of ad- ditional expert test and measure- ment services for your equipment, including initial start-up assistance onsite education and training, as well as design, system integration, and project management. For more information on repair and calibration services, go to: www.agilent.com/find/removealldoubt