DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

■ L and R Ports: 10MHz to 1500MHz Operation ■ X Port: DC to 1000MHz ■ Consistent Low Mixer Noise Figures and Stable Isolations ■ Subminiature Package is  RFI Shielded and Internally Constructed to Withstand Severe Environments

Applications

■ Milcom ■ Electronic Warfare ■ Industrial, Scientific, Medical ■ Aerospace Avionics ■ Military and Civilian Radar ■ Satellite Communications DBM-143

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131030 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 4 DBM-143 Absolute Maximum Ratings Parameter Rating Unit Operating Temperature Range -54 to +100 °C X Port Input Current 50 mA Total Input Power at 25°C 200 mW Total Input Power (Derated Linearly) at 100°C 50 mW Specifications guaranteed with IF from DC to 1000MHz. For higher IF frequencies, consult IF response curve for typical roll-off. Environmental conditions: All units are designed to meet their specifications between -54°C and +100°C and after exposure to any or all of the following tests per MIL-STD-202E.  Thermal Shock: Method 107D, Test Condition B  Altitude: Method 105C, Test Condition G  H.F. Vibration: Method 204C, Test Condition D  Mechanical Shock: Method 213B, Test Condition C  Random Vibration (15 minutes per axis): Method 214, Test Condition IIF  Solderability: Method 208C  Terminal Strength: Method 211A, Test Condition C  Resistance to Soldering Heat: Method 210A, Test Condition B Sealed units meet the requirements of Method 106D of MIL-STD-202E when exposed to humidity. Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max General Performance LO +7dBm (High side LO), RF -10dBm, IF 100MHz Operating Frequency Range L Port 10 1500 MHz R Port 10 1500 MHz X Port DC 1000 MHz Specifications guaranteed with IF from DC to 1000MHz. For higher IF frequencies, consult IF response curve for typical roll-off. Frequency Bands 10MHz to 600MHz (dB) 600MHz to 1200MHz (dB) 1200MHz to 1500MHz (dB) Conversion Loss 8.5 7.5 9.5 L-R Isolation 30 25 25 L-X Isolation 30 20 18 R-X Isolation 25 15 10 Specifications guaranteed with IF from DC to 1000MHz. For higher IF frequencies, consult IF response curve for typical roll-off. DC Polarity Positive with L and R port signals in-phase.

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131030 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 4 DBM-143 Typical Performance Impedance: All ports 50Ω; 1dB compression point: 0dBm; 1dB desensitization point: -2dBm; 3rd order Intercept point: +10dBm; noise figure is within 1dB of conversion loss; LO power range: +4dBm to +13dBm

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131030 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 4 DBM-143 Package Drawing (Dimensions in millimeters) Material: F15 Kovar per ASTM Standard F-15-68 (chemical composition per MIL-STD-1276, type K) Finish: plating: all metal parts, gold per MIL-G-45204, type 1, grade A, class 1, over nickel per MIL-C-26074, class 1 Leads: Kovar per MIL-STD-1276, type K