CT40TMH-8 POWEREX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Feb.1999 CT40TMH-8 450 ±0.1 7.0 I C = 1mA, VGE = 0V VCE = 400V, VGE = 0V VGE = ±40V, VCE = 0V VCE = 10V, IC = 1mA V(BR)CES ICES IGES VGE(th) 400 ±30 ±40 200 –40 ~ +150 –40 ~ +150 V V V A VCES VGES VGEM ICM Tj Tstg 10.5MAX. 3.8MAX. qwe 13.5MIN. 1.3MAX. 5.2 2.8 φ 3.2 5.0 0.8 2.54 2.54 4.7MAX. 0.5 2.6 1.2 8.5 w q e q GATE w COLLECTOR e EMITTER V µA µA V OUTLINE DRAWING Dimensions in mm MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT40TMH-8 STROBE FLASHER USE APPLICATION Strobe Flasher. VGE = 0V VCE = 0V, See notice 4 VCE = 0V, tw = 0.5s See figure 1 Parameter ConditionsSymbol Ratings Unit Collector-emitter voltage Gate-emitter voltage Peak gate-emitter voltage Collector current (Pulsed) Junction temperature Storage temperature ELECTRICAL CHARACTERISTICS (Tj = 25°C) Symbol UnitParameter Test conditions Limits Min. Typ. Max. MAXIMUM RATINGS (Tc = 25°C) Collector-emitter breakdown voltage Collector-emitter leakage current Gate-emitter leakage current Gate-emitter threshold voltage TO-220F
Feb.1999 RECOMMEND CONDITION VCM = 330V IP = 180A C M = 1200µF VGE = 28V MAXIMUM CONDITION 350V 200A 1500µF IXe Vtrig VCE R G VG IGBT C M + VCM Vtrig VG Ixe 200 160 120 0 5040301002 0 <TC = 70°C C M = 1500µF MAXIMUM PULSE COLLECTOR CURRENT GATE-EMITTER VOLTAGE V GE (V) PULSE COLLECTOR CURRENT I CM (A) TRIGGER SIGNAL Xe TUBE CURRENT VOLTAGE IGBT GATE MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT40TMH-8 STROBE FLASHER USE PERFORMANCE CURVES APPLICATION EXAMPLE Notice 1. Gate drive voltage during on-period must be applied to satisfy the rating of maximum pulse collector current. And reverse gate current during turn-off must be kept less than 1A. (In general, it is satisfied if RG ≥ 30Ω ) Notice 2. IGBT has MOS structure and its gate is insulated by thin silicon oxide. So please handle carefully not to suffer from electrostatic charge. Notice 3. The operation life should be endured 5,000 shots under the charge current (Ixe ≤ 200A : full luminescence condition) of main condenser (CM =1500µF). Repetition period under full luminescence condition is over 3 seconds. Notice 4. Total operation hours must be applied within 5,000 hours. Figure 1