4501630 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
OPERATING & ASSEMBLY INSTRUCTIONS Model No.CSR47 & CSR94 PART NO:4501630, 4501620 STORAGE BIN RACKS
Thank you for purchasing this CLARKE Storage Bin Rack. Before attempting to assemble the unit, please read this manual thoroughly and follow the instructions carefully. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SPECIFICATION Top section Back Strut Small Bins (red) Bin Support crossbar Upright Support Large Bins (blue) Upright Supports Base platform Castor with brake (CSR94-mobile unit only) Castor without brake (CSR94- mobile unit only) ledoM dediselgnis74RSC dediselbuodeliboM49RSC yticapacdaoL ,llamsrofcp/sgk5.1 egralrofcp/sgk5.2 ,llamsrofcp/sgk5.1 egralrofcp/sgk5.2 HxWxLsnoisnemiDm m0511x082x049m m5421x005x049 thgieWg k32g k53
- Turn the base on its back and attach the castors using the hexagonal headed bolts supplied as shown in Fig.1. (CSR94 mobile racks only) 2. Turn the base the right way up and engage the foot operated brake on one pair of castors to hold the unit steady. (CSR94 Mobile racks only) 3. Assemble the upright supports and the support brackets as shown in Fig.2 using the cross- headed screws supplied. 4. Connect the supporting bars to the upright supports using the bolts and nuts supplied. Note; Assemble all the parts loosely before tightening all the bolts together. 5. Install the top shelf using two more pairs of machine screws 6. Connect the back strut to each supporting bar with the upper end shown by the arrow shown in Fig 3 using the remaining cross-headed screws. 6. Hang the storage bins by their lips from the top edge of the supporting bars. Your storage bin rack is now ready to use. ASSEMBLY Fig 1 Fig 3 Fig 2