6499635 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com MODEL NO: CPPPSS PART NO: PART NO: 6499635 CHEMICAL PLUNGER PUMP INTRODUCTION Thank you for purchasing this CLARKE chemical plunger pump, Suitable for water, alcohol, petroleum, diesel, paraffin, lubricant, NOT SUITABLE for water-based chemicals, acid or alkaline. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. LIST OF CONTENTS ASSEMBLY
- 1 x P u m p 1 x O u t l e t t u b e 1 x Handle assembly 1 x Extension Inlet tube 2 x Nuts and Bolts 1 x 2 piece telescopic extension with filter FITTING THE OUTLET TUBE 1. Remove the nut from the pump as shown. 2. Pl ace the nut over the outlet tube and back onto the pump FITTING THE HANDLE ASSEMBLY FITTING THE TELESCOPIC EXTENSION TUBE 1. Connect the handle as shown and secure at each point using the small nuts and bolts. 1. Fit the telescopic extension with filter together as shown
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com FITTING THE PUMP TO A BARREL 1. Fit the telescopic extension with filter to the pump. You can fit the extension inlet tube in between if required. 2. Adjust the telescopic extension tube to the required length. The bottom of the telescopic extension should be just off of the bottom of the barrel when fitted. 3. Screw the pump into the threaded opening of the barrel. USING THE PUMP 1. Place a suitable container under the outlet tube. 2. Pump the handle to draw fluid from the barrel. The first time you use the pump, you may need to pump the handle a few times to prime the pump. Each ‘pump’ of the handle will draw approximately 0.38L of fluid. SPECIFICATIONS GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. Container Adaptor Size 2" BSP Max Flow 0.38 litres per stroke Inlet Tube Length 300 mm Inlet Tube Diameter 21.5mm Outlet Tube Diameter 16.7mm Min-Max Height (with extension tube fitted) 1080 - 1360 mm Maximum Drum Size 205 litres Dims (WDH) 485 x 90 x 1360 mm (fully extended) Product Weight 0.8 kg
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com CHEMICAL RESISTANCE TABLE Room Temperature % S a y M a s s C o n c e n t r a t i o n WATER ACIDS ALKALI PETROLEUM BASED HALOGENS ALCOHOL THINNER Sea Water Acetic Acid 20% Potassium Hydroxide 25% Silicone Oil Calcium Chloride 10% Ethanol 96% Acetone Boric Acid 10% Sodium Hydroxide solution 50% Copper Sulphate Glycerine Citric Acid 10% Potassium Dichromate 10% Isopropanol Hydrochloric Acid 35% Soap Solution Methanol Lactic Acid 80% Sodium Chloride 10% Propanol Nitric Acid 10% Sodium Nitrate 10% Oxalic Acid 50% Sodium Thiosulphate Phosphoric Acid 50% Zinc Chloride 10% Sulphuric Acid 70%
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com