CPA241 APEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com SUPPLY VOLTAGE, +VS to –VS 350V OUTPUT CURRENT, continuous 60mA INPUT VOLTAGE, differential ±16V INPUT VOLTAGE, common mode ±VS TEMPERATURE, junction 150°C ABSOLUTE MAXIMUM RATINGS NOTE: Refer to parent product data sheet PA241 for typical AC electrical characteristics, precautions, applications and other test parameters. TYPICAL EXTERNAL CONNECTIONS DIE LAYOUT * Required component and value if given. Optional balance components are recommended values. CC is NPO, rated for full supply voltage –VS to +VS. NOTE: Diagram for connection illustration only. All op amp configurations are possible. Pad Function Pad Function
1 Output 5 +Vs
2 Compensation 6 -Vs
3 Compensation 8 +IN
4 Current Limit 9 -IN
CAUTION The CPA241 is a MOSFET amplifier. ESD handling procedures must be observed Dimension: 154.5 x 117.5 ± 2.5 Mils. Thickness: 15 Mil (380µ). Backside Metal: None, Silicon. Bond pad: 5 Mil sq (127µ) AI. Make no connection to bond pads not listed by function. Note: The backside of the CPA241 die is isolated up to 500V. The top side walls of the CPA241 die are isolated up to 300V. Ordering Information: Order #: CPA241DI80: Die are only available in waffle packages with a total of 80 die per package. NOTES: 1. Unless otherwise stated VS = ±50 V, TA = 25°C, DC input specification ± value given. 2. Sample tested by wafer to 95%. PARAMETER TEST CONDITIONS1 MIN TYP MAX UNITS OFFSET VOLTAGE, initial VS = ±50V 15 40 mV BIAS CURRENT, initial 56 200 pA COMMON MODE REJECTION VCM = ±90 V DC 84 94 dB VOLTAGE SWING IO = 40mA ±VS–12 ±VS–10 V SUPPLY CURRENT, quiescent VS = ±50 V 1.8 2.1 2.3 mA DC WAFER PROBED SPECIFICATIONS This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice. CPA241 REV B OCTOBER 2006 © 2006 Apex Microtechnology Corp. 3$- $$m74 7*/ "1&9 M I C R O T E C H N O L O G Y CPA241