CP6940 KONTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Fully Managed L2&L3 Switching and Routing CompactPCI®/VME 1/10/40 Gigabit Ethernet Switch For long term programs and harsh environments PICMG2.16 and VITA31.1 QSFP+, SFP+, SFP, RJ45 uplink options L2-only value version European design and production
// 2 www.kontron.com CP6940 Fully Managed L2&L3 Switching and Routing Kontron’s CP6940 is a fully managed layer 2&3 1/10/40 Gigabit Ethernet Switch series. It provides versatile feature support by using highest integration of Ethernet switch silicon. CP6940 is designed for long term programs and harsh environments, for applications requiring outstanding bandwidth and communication safety. More uplinks, higher bandwidth, improved management QSFP+ for 40G or 4x 10G SFP+ multi-rate 1/2.5/5/10GBase-x RJ45 and SFP 1G front uplinks 24x extended fabric links CPCI PICMG2.16 and VME VITA31.1 4 MByte fully integrated packet buffer Optimized for multicast traffic Robust: VITA 47 class EAC6 V2 and extended temperature Reliable: hot swap, IPMI, SNMP, built-in tests, maintenance Widely compatible with CP6924 & CP6930 Optimized for multicast traffic Burst absorption is the key, handling of several multicast data streams at the same time. That’s where CP6940 is tailored for by its non-blocking architecture and line rate for all packet sizes; by
4 MByte fully integrated packet buffer; by the intelligent memory
management unit (MMU) optimized for handling of bursty data traffic, and by dynamic memory allocation. Extra CPU to avoid limitations The Kontron design is equipped with a powerful QorIQ® LS1 family processor, so that limitations are avoided which could be observed using only the switch silicon integrated CPU; in particu- lar, performance of the management systems, response times on SNMP requests. Also, the CPU makes CP6940 prepared for future upgrades and extensions, which is important for long time available switches. Full L2/L3 Management The CP6940 can be monitored via SNMP. A comprehensive com- mand line interface provides easy management and remote configuration by either serial or network interface. Supported features are: IPv4/optionally IPv6 forwarding & multicast, routing & switching, Quality of Service, VLANs, Spanning tree (STP, RSTP, MSTP, PVST, RPVST) time synchronization using 802.1AS, access control, extended user management and many more. PICMG2.16 and VITA 31.1 The 24 rear ports meet the requirements of CompactPCI systems according to PICMG2.16 and of VME systems according to VITA31.1, as well. Reliability and Robustness CP6940 Rugged air cooled designs are made for harsh environ- ments and meet VITA 47 class EAC6 V2 and can operate in environ- ments with an extended temperature range from -40 °C up to +70 °C. Hardware hot swap as well as complete SNMP manage- ment support is the basis for reliable systems. Built-In test capabilities enable effective switch maintenance. CP6940-RA-OC, successor of CP6924 The CP6940-RA-OC rugged air cooled optical copper switch version provides four RJ45 10/100/1000BASE-T front uplinks, moreover two SFP for optical 1000Base-x or SGMII for 10/100/1000 Base-T copper modules, and four SFP+ multi-rate 1/2.5/5/10GBase-x uplinks. 140Gbps high performance version CP6940-RA-OC-P is the high performance version, equipped with two QSFP+ front uplinks which provide 40GBase-xR4 or 4x 1/10GBase-x via breakout cable. Additional two SFP and four SFP+, together with the rear uplinks, add up to 140 Gbps calculated bandwidth in total. CP6940-RA-OC-P is the perfect successor for CP6930, with more uplinks and higher ruggedization. Cost sensitive value version A value version of the CP6940 is tailored for cost sensitive system solutions, when average robustness and operation in a standard temperature range is sufficient. The CP6940-SA-OC-V provides layer 2 management only, four front RJ45 10/100/1000BASE-T and six SFP for optical 1000Base-x or SGMII for 10/100/ 1000Base-T copper modules. Thus, it provides more front uplinks than the pre- vious CP6924 value version.
// 3 www.kontron.com CP6940 ARCHITECTURE
// 4 www.kontron.com TECHNICAL INFORMATION CONTROLLER AND SWITCH Broadcom BCM56174 Ethernet Switch Onboard NXP QorIQ® Layerscape 1020A NXP µController for IPMI INTERFACES COMMON OPTIONS (depending on product variants) 24x 10/100/1000 Base-T link ports on backplane or RTM acc. PICMG2.16 / VITA31.1 1x 10/100Base-T for Management (RJ45 connector) 1x RS232 for Management (RJ45 connector and backplane) Reset Switch Status LEDs SGMII/1000Base-X uplinks for SFP optical transceivers 1/2.5/5/10GBase-X uplinks for SFP+ optical transceivers 10/100/1000GBase-T uplinks for RJ45 40GBase-X uplinks for QSFP+ or alternatively 4x 1G/10GBase-X via break-out cable MANAGEMENT GENERAL ETHERNET BRIDGING PROTOCOLS ETHERNET ROUTING PROTOCOLS ENHANCED FEATURES Management via SNMP, Command Line (T elnet, SSH) - In-band - Out of band via Ethernet or RS232 IPMI version 1.5, Power On Self T est DHCP server, relay and Boot media supported NTP server feature Reliable software, field upgradable Dual boot images with roll-back capabilities Advanced management monitoring features Including: - Link aggregation (802.3ad) - VLANs (802.1Q) - QoS (IEEE 802.1p) - Spanning tree (802.1s, 802.1d, 802.1w, PVST, RPVST) - Flow control (802.3x) Including: - Static routing - VLAN/Port based routing - GARP/GVRP, GMRP - ARP, ICMP, OSPF, RIP, VRRP, DVMRP - DHCP/Bootp relay - BFD detection - Egress ACLs, IP ACL support - Auto VoIP - IGMP snooping & proxy support - Startup configuration configurable - Watchdog - Cable test COMPLIANCE CompactPCI® Core Specification PICMG 2.0 Rev. 3.0 CompactPCI® HotSwap Specification PICMG 2.1 R 2.0 CompactPCI® System Management PICMG 2.09 R 1.0 CompactPCI® Packet Switching Backplane PICMG 2.16 R. 1.0 VME64x Packet Switching Backplane VITA 31.1 Intelligent Platform Management Interface Specification V1.5 ENVIRONMENT HUMIDITY OPERATING TEMPERATURE STORAGE TEMPERATURE SHOCK/VIBRATION IMMUNITY/EMISSION SAFETY 93 % RH at 40 °C, non-condensing (acc. to IEC 60068-2-78) CP6940-RA variants: -40 °C to +70 °C; CP6940-SA variants: 0 °C to +60 °C (forced air cooling required) -50 °C to +100 °C IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-29 Designed to meet VITA47, class EAC6, V2 (CP6940-RA versions) EN61000-6-2, NEBS GR-1089-CORE Issue 6, CP61000-6-3 IEC61010-1, designed to meet UL61010-1 and CSA22.2 No.950, LVD 73/23/EEC, Denan Law compliant GENERAL POWER CONSUMPTION DIMENSION WEIGHT MTBF max. 60 W 233.5 mm x 160 mm, 6U 4HP (single slot) approx. 800 g CP6940-RA-OC and CP6940-SA-OC-V: 138,146h @ 30 °C, CP6940-RA-OC-P: 140,823 h @ 30 °C, based on MIL-HDBK-217 FN2, Ground Benign, Controlled
// 5 Kontron S &T AG Lise-Meitner-Str. 3-5
86156 Augsburg, Germany
T el.: + 49 821 4086 0 Fax: + 49 821 4086 111 info@kontron.com www.kontron.com Global Headquarters Copyright © 2019 Kontron S&T AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized. Specifications are subject to change without notice. CP6940-20200729 - WMH ORDERING INFORMATION ARTICLE DESCRIPTION CP6940-RA-OC-P Performance Rugged GbE Switch. Full L2/L3 management. Rear: 24x Ports 10/100/1000BaseTX acc. to PICMG 2.16 and VITA31.1, or Rear-I/O. Front ports: Two 1G SFP, four 1/2.5/5/10G SFP+, two 40G QSFP+, option for 4x 1G/10G each. Extended temperature range -40 °C to +70 °C. or Rear-I/O. Front ports: Four 1/2.5/5/10G SFP+, four 1GbE RJ45. Extended temperature range -40 °C to +70 °C or Rear-I/O. Front ports: four 1G RJ45, two 1GF SFP, two 1/2.5/5/10G SFP+. Standard temperature range 0 °C to +60 °C.