CP3004-SA

CP3004-SA KONTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

5TH GEN. Intel® Core™ 3U CompactPCI CPU BOARD HIGH PERFORMANCE RANGE, HIGH- END GRAPHICS, HIGH CONNECTIVITY  CoreTM i7 Quadcore and Dualcore (4th gen) versions  DirectX® 11, OpenGL 4, three independent outputs  USB 3.0, SATA 6Gbit/s, 3x Gbit Ethernet, PCI Express  rugged VITA47 EAC3, extended temperature

// 2 www.kontron.com With CP3004-SA, the fi fth Generation of Intel® Core™ technology has been made available in Kontron’s CompactPCI product portfolio. The high density design off ers extraordinary performance-per-watt values based on the 14 nanometer technology, and is an ideal backbone for powerful network- intensive applications providing virtualization (VT-X, VT-D) and highest graphics performance. The new-generation graphics controller has up to 40 execution units providing OpenCL 1.2 / OpenGL 4 and triple independent display support. The Intel® Advanced Vector Extensions AVX 2.0 enhancements provide a huge performance improvement in fl oating-point-intensive computations, which are a key part of digital signal and image processing applications. CP3004-SA is prepared to be used in demanding and harsh environments. Dual-Core versions (4th gen CPU) provide for low heat dissipation. The processor’s TDP can be adjusted dynamically to a desired performance and power envelope. Typical applications can be found in the markets - Military / Defence: radar, sonar, general - Industrial Automation: plant control, machine control - Energy: demanding environments - Medical: imaging Long term availability and Kontron’s commitment to a rich CompactPCI portfolio make CP3004-SA a safe investment with low total-cost-of-ownership. CP3004-SA is available with dual- and quad-core CPU performance scalable from the 1.8 GHz Intel® Core™ i3-4112E up to the 2.6 GHz i7-5700EQ processor. Intel® Celeron® processors will be off ered o n request. Memory-demanding applications can make use o f up to 16GB 1600 MT/s DDR3 SDRAM with Error Checking and Correction (ECC). For onboard data storage, the CP3004-SA off ers up to 32GB on a dedicated SLC SATA Flash module or a HDD/SSD and CFast option on the 8HP extension module. On the system side, CP3004- SA supports a PCI 32-bit, 33MHz (66MHz on request) CompactPCI interface, enabling the peripheral mode feature. When installed in a system master slot, the CompactPC I interface i s enabled, whereas the CompactPCI interface will be isolated when installed in a peripheral slot. Variety of Interfaces and Options The CP3004-SA comes with a comprehensive I/ O feature set supporting known and established interfaces such as VGA, USB2.0, Gigabit Ethernet and serial ports as well as the new high-speed interfaces USB3.0 and SATA 6Gb/s. By adding one of the three extension modules - XMC Carrier, Legacy I/ O or SA TA/USB extension – the CP3004-SA’s I/O capabilities will be further extended. Backwards compatibiliy is also gran ted - the opt ional Rear I/O interface is compatible with previous CPU board series. System Security Options for write protection and TPM1.2 are provided. The Trusted Platform Module (TPM) provides hardware- based encrypti on mechanisms to create, seal or store keys, passwords and or other critical data. CP3004-SA FIFTH GENERATION INTEL ® CORE™ 3U COMPACTPCI CPU BOARD

// 3www.kontron.com TECHNICAL INFORMATION PROCESSOR 5th Generation Intel® Core™ i7 processor (14nm technology): - i7-5700EQ Quad-Core up to 2.6 GHz, 6MB L3 cache Moreover 4th generation: - i5-4410E: Dual-Core 2.9 GHz, 3MB L3 cache - i3-4112E: Dual-Core 1.8 GHz, 3MB L3 cache All boards are passive cooled with a heatsink in 4HP height Forced air cooling at specifi c fl ow rate is required depending on the processor version MEMORY SYSTEM MEMORY BOOT FLASH (UEFI) SATA NAND FLASH Up to 16GB dual channel DDR3L SDRAM running at 1600 MHz, with ECC, via two SODIMM sockets Two redundant 16 MB SPI boot fl ashes with fail-over functionality Up to 32GB SLC NAND Flash on a dedicated SATA NAND Flash module The SATA NAND Flash option is only available on a 4HP CP3004-SA Onboard 2.5” SATA SSD/HDD installation via CP3004-HDD extension, optionally available with two SSD/HDD Onboard CFast installation via 8HP extension ONBOARD CONTROLLER HDD CFAST PLATFORM CO NTROLLER HUB GRAPHICS GIGABIT ETHERNET UART WATCHDOG RTC TRUSTED PLATFORM MODULE (TPM) Mobile Intel® QM87 Platform Controller Hub featuring: - USB host interface with eight USB2.0 and six USB3.0 ports (5x USB2.0 and 1x USB3.0 ports are used) - SATA host controller with six SATA total (max four ports SATA 6Gb/s) with RAID 0/1/5/10 support Intel® HD Graphics 5600 integrated (Quad-Core). - Supports DirectX ® 11.2, OpenGL® 4.3 Intel® HD Graphics 4600 integrated (Dual-Core). - Supports DirectX ® 11.1, OpenGL® 4.0 Maximum resolutions: - VGA with a CRT monitor: 1600 x 1200 pixels @ 75 Hz - VGA with a LCD monitor: 1920 x 1200 pixels @ 60 Hz - DisplayPort: 3840 x 2160 pixels @ 60 Hz Up to thr ee 1000BASE-T interfaces, two front/rear switchable with WOL (Wake-on-LAN) support, third available via extension CP3004-HDD, Intel® i210 Ethernet controller dual UART, 16C550-compatible FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage confi guration Integrated in PCH, with 256 Byte CMOS RAM Atmel AT97SC3204 TPM 1.2 controller FRONT INTERFACES 4HP VGA USB ETHERNET LED’s 1x VGA-CRT 15-pin D-Sub connector 2x USB 2.0 ports, 4-pin standard USB connectors 2x RJ-45 with integrated LEDs (ACT, SPEED) 6x LEDs: 4x POST Code or General Purpose, WD, TH ONBOARD INTERFACES SATA CABLE CONNECTOR HIGH-SPEED EXTENSION CONNECTORS SATA EXTENSION CONNECTOR 1x onboard standard 7-pin SATA connector with locking mechanism, SATA 6Gb/s 2x high-speed connectors holding: - PCI Express - One SATA 3Gb/s - One SATA 6Gb/s - 2x USB 2.0/3.0 - 2x DisplayPort - COM1 (TTL) - HDA - LPC 1x 18-pin connector holding one SATA port for the SATA NAND Flash module REAR I/O VIA J2 The CP3004-SA supports: - 2x SATA 3Gb/s ports - 2x Gigabit Ethernet ports without LED signals - 2x USB 2.0 ports - 1x VGA analog port - 2x COM port RS-232 (LVTTL signal level) - 5x GPIs and 3x GPOs (LVTTL signal level) - Reset and Power Management signals - Option to write protect non-volatile RAMs via a special pin COMPACTPCI BUS INTERFACE PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz (66MHz on request), version with rear I/O via J2 Universal 5V and 3.3V PCI signalling voltage supported,

7 Req/Gnt & clock lines

Operating in system slot as system master and in peripheral slot in PCI passive mode

// 4 www.kontron.com TECHNICAL INFORMATION SUPERVISORY FUNCTIONS Watchdog, software confi gurable, 125ms to 4096s in 16 steps, generates IRQ or hardware reset or dual-stage confi guration SOFTWARE SUPPORT COMPLIANCY - AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board confi guration via Shell, diskless, keyboardless, videoless operation - LAN boot support - Board identifi cation number accessible via EEPROM - Support for Windows® 7, ES7, 8, ES8, Windows® Embedded Industry 8.1, Windows® Server 2008R2, 2012, Windows® 10 IoT, Linux, VxWorks® 7 (Other OSs may also be used on request. Please contact Kontron) - CompactPCI Core Specifi cation PICMG 2.0 Rev. 3.0 - CompactPCI Hot Swap Specifi cation PICMG 2.1 Rev. 2.0 Designed to meet or exceed: - Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1 - EMI/EMC: EN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2 GENERAL DIMENSIONS WEIGHT 3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm CP3004-SA 4HP: 320 g 234 051 hrs acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C POWER CONSUMPTION ENVIRONMENTAL MTBF OPERATING TEMPERATURE STORAGE TEMPERATURE CLIMATIC HUMIDITY OTHER CP3004-SA with i3-4112E: Dual-Core 1.8 GHz typ. 21 W CP3004-SA with i5-4410E: Dual-Core 2.9 GHz typ. 47 W CP3004-SA with i7-5700QE QC up to 2.6 GHz typ. 45 W 0°C to +60°C, standard -40° to +85°C, extended temp. E2 depending on CPU and Wattage (ask) -40°C to +85ºC (without additional components) 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) ȱƕªˆˆÈƕ c&UƕŢťƕ š CP3004-SA EXPANSION CAPABILITIES The CP3004-SA provides various expansion capabilities via specifi cally designed modules such as the SATA Flash Module, the Smart Extension Module, the CP3004-HDD module and the CP3004-XMC module. The 4HP CP3004-SA can accommodate two modules, the SATA Flash Module and the Smart Extension module. The SATA Flash Module is available with up to 32 GB SLC NAND fl ash memory and can be used as storage device for onboard data or operating system data. The SATA Flash Module is specifi cally designed and optimized for embedded systems providing high performance, reliability and security. The Smart Extension Module expands the onboard I/O capability and provides one additional SATA cable connector plus one USB 2.0 connector thereby facilitating the connection to system-internal USB and SATA devices. Furthermore, two extension modules are available to expand the CP3004-SA to a doubleslot 8HP version, the CP3004-HDD module and the CP3004-XMC module. If more interfaces to the front are needed, the CP3004-HDD is the right choice. This module provides one USB 3.0 port, one Gigabit Ethernet interface, two DiplayPorts, and one COM interface on the front panel. In addition, the CP3004-HDD module provides support for a 2.5” SATA HDD/SSD and a CFast card. As a further extension capability of the CP3004-SA to 12HP, a SATA adapter module is available with the CP3004-HDD to provide an additional SATA connector for 2.5” SATA HDD/SSD devices. The 12 HP CP3004-SA does not provide a CFast socket. The CP3004-XMC module provides one x8 (or less) PCI Express 2.0-compliant interface with up to 5 GT/s for one XMC module. In addition, the CP3004-XMC module is capable of accommodating a CFast card.

// 5www.kontron.com TECHNICAL INFORMATION TECHNICAL INFORMATION  SATA FLASH MODULE SMART EXTENSION MODULE MEMORY CAPACITY NAND FLASH MEMORY BANDWITH Up to 32 GB SLC-based NAND Flash memory 32nm T oshiba Single Level Cell Components Up to 60 MB/s read rate Up to 55 MB/s write rate GENERAL DIMENSIONS WEIGHT MTBF POWER CONSUMPTION 38 x 27mm Ca. 7 grams 3,848,557 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C Typ. 0.5W, 3.3V supply ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) ONBOARD INTERFACES SATA USB One onboard angled standard SATA connector One onboard angled standard USB 2.0 connector GENERAL DIMENSIONS WEIGHT MTBF 34 x 49 mm Ca. 11 grams 6,534,579 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) // CP3004-SA WITH SATA FLASH MODULE // CP 3004-SA WITH SMART EXTENSION MODULE

// 6 www.kontron.com CP3004-HDD TECHNICAL INFORMATION FRONT INTERFACES (8HP) DISPLAYPORT ETHERNET USB SERIAL PORT CONTROL 2x 20-pin DisplayPort connectors, DVI/HDMI capable through passive cable adapter 1x RJ-45 with integrated LEDs (ACT, SPEED) 1x USB 3.0 port, 9-pin type-A connector 1x 16C550-compatible serial port, RS232 signalling, RJ-45 Reset button and HDD activiy LED ONBOARD INTERFACES SATA CFAST 1x SATA connector for connecting a SATA 2.5” HDD/SSD (SATA 6Gb/s), Option to add 2nd SATA HDD/SSD (results in 12HP stacking height and CFast socket won’t be available) 1x CFast card socket GENERAL WEIGHT MTBF POWER CONSUMPTION CP3004-SA 8HP: 460 g, CP3004-SA 12HP: 520 g 1,120,458 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C typ. 0.5W, without peripheral devices connected ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC (without additional components) 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) // CP3004-SA 12HP

TECHNICAL INFORMATION FRONT INTERFACES (8HP) XMC CONTROL XMC front panel bezel cutout Reset button and CFast activity LED ONBOARD INTERFACES XMC CFAST 1x onboard XMC connector (P15), 1x x8 PCI Express 2.0-compliant interface with up to 5 GT/s 1x CFast card socket GENERAL WEIGHT MTBF POWER CONSUMPTION CP3004-SA 8HP: 430 g 2,017,352 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C Depends on XMC module, typ. 0W without XMC ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC (without additional components) 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) // 7www.kontron.com

// 8 www.kontron.com EUROPE, MIDDLE EAST & AFRICA Lise-Meitner-Str. 3-5

86156 Augsburg

T el.: + 49 821 4086 0 Fax: + 49 821 4086 111 info@kontron.com CORPORATE OFFICES NORTH AMERICA

14118 Stowe Drive

Poway, CA 92064-7147 USA T el.: + 1 888 294 4558 Fax: + 1 858 677 0898 info@us.kontron.com  ASIA PACIFIC 1~2F, 10 Building, No. 8 Liangshuihe 2nd Street, Economical & T echnological Development Zone, Beijing, 100176, P.R.China T el.: +86 10 63751188 Fax: +86 10 83682438 info@kontron.cn Copyright © 2015 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purpos es. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered tra demarks are the property of their respective owners and are recognized. Specifi cations are subject to change without notice. CP3004-SA-20150924 - WMH ORDERING INFORMATION ARTICLE DESCRIPTION CP3003-SA PREFERRED CONFIGURATIONS CP3004-SA-1.8D-8-4F-T CP3004-SA Dual Core i3, 8GB, 4HP, Front IO, TPM CP3004-SA-1.8D-8-4R-T CP3004-SA Dual Core i3, 8GB, 4HP, Rear IO, TPM CP3004-SA-2.9D-8-4F-T CP3004-SA Dual Core i5, 8GB, 4HP, Front IO, TPM CP3004-SA-2.9D-8-8R-T CP3004-SA Dual Core i5, 8GB, 8HP, Rear IO, HDD Mezzanine, TPM CP3004-SA-2.6Q-16-4F-T CP3004-SA Quad Core i7, 16GB, 4HP, Front IO, TPM CP3004-SA-2.6Q-16-4R-T CP3004-SA Quad Core i7, 16GB, 4HP, Rear IO, TPM Please contact your local sales representative for other confi guration options: CPU variant, RAM size, rear I/O support, HDD I/O mezzanine option, XMC mezzanine option, extended temperature option, conformal coating option) FLASH STORAGE (as separate items, not mounted on the CPU) FLASH-SATA-XGB-CP300X SATA NAND Flash module, various sizes available CFASTx Industrial grade CFast, various sizes available REAR TRANSITION MODULES CP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors) CP-RIO3-04 8HP rear I/O module (in addition to 4HP: COM1/2) CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors) SOFTWARE VXW-BSP-CP3004-SA-V6.9.x VxWorks 6.9.x Board Support Package LINUX BSP Available as download on the webpage WINDOWS PACKAGES Available as download on the webpage NOTES The SATA NAND Flash module cannot be used in conjunction with the CP3004-HDD/CP3004-XMC module