CP3003-SA

CP3003-SA KONTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

3RD GEN. INTEL® CORE™ 3U COMPACTPCI CPU BOARD  high-performance CPU  high-end graphics  high-speed connectivity

// 2 www.kontron.com Intel®’s new 3rd Generation Core™ technology brings an unprec- endeted combination of highest performance and new pow- er-saving capabilities to the embedded market. Making use of this latest technology the CP3003-SA is able to off er a new range of performance and power consumption scalability. On the one hand the CP3003-SA provides utmost performance with a quad-core CPU option, on the other hand the option to dynamically adjust the processor’s TDP to a desired performance and power enve- lope through new CPU features such as Confi gurable TDP. The CP3003-SA is available with dual- and quad-core CPU perfor- mance scalable from the ULV 1.7 GHz Intel® Core™ i7-3517UE up to the 2.1 GHz i7-3612QE processor, Intel® Celeron® processors will be off ered on request. The new Intel® HD4000 graphics with integrat- ed DirectX® 11, OpenGL 3.1 and OpenCL 1.1 support provides an up to four times better graphics performance compared to previous platform designs. Additionally, now three independent graphics outputs are supported. Memory-demanding applications can make use of up to 16GB 1600MHz DDR3 SDRAM with Error Checking and Correction (ECC). For onboard data storage the CP3003-SA of- fers up to 32GB on a dedicated SLC SATA Flash module or a HDD/ SSD and CFast option on the 8HP extension module. On the system side, the CP3003-SA supports a PCI 32-bit, 33MHz (66MHz on request) CompactPCI interface enabling the peripheral mode feature. When installed in a system master slot, the Com- pactPCI interface is enabled, whereas the CompactPCI interface will be isolated when installed in a peripheral slot. Variety of Interfaces and Options The CP3003-SA comes with a comprehensive I/O feature set sup- porting known and established interfaces such as VGA, USB2.0, Gigabit Ethernet and serial ports as well as the new high-speed interfaces USB3.0 and SATA 6Gb/s. By adding one of the three ex- tension modules - XMC Carrier, Legacy I/O or SATA/USB extension – the CP3003-SA’s I/O capabilities will be further extended. Back- wards compatibiliy is also granted - the optional Rear I/O interface is compatible with predecessor CPU boards. System Security The Trusted Platform Module (TPM) provides hardware-based en- cryption mechanisms to create, seal or store keys, passwords and or other crucial data. Long-T erm Availability Investing in a new project is always a challenge and risky. Extend- ing the lifetime of an application to the possible maximum is there- fore a critical issue to save the development investments. Deliver- ing a stable product based on Intel®‘s embedded product line, the CP3003-SA ensures long-term availability. This eliminates the risk of unplanned design changes and unexpected expensive applica- tion modifi cation. While minimizing deployment risks by providing a broad range of software support, the CP3003-SA eases the pro- cess of product integration and maximizes your competitive ad- vantage to meet your time-to-market window. CP3003-SA 3RD GENERATION INTEL ® CORE™ 3U COMPACTPCI CPU BOARD

// 3www.kontron.com TECHNICAL INFORMATION PROCESSOR 3rd Generation Intel® Core™ i7 processor (22nm technology): - i7-3612QE: Quad-Core 2.1 GHz, SV, 6MB L3 cache (shared instruction/data cache, shared among all cores) - i7-3555LE: Dual-Core 2.5 GHz, LV, 4MB L3 cache (shared instruction/data cache, shared among all cores) - i7-3517UE: Dual-Core 1.7 GHz, ULV, 4MB L3 cache (shared instruction/data cache, shared among all cores) - Celeron® processor is off ered on project request All boards are passive cooled with a heatsink in 4HP height Forced air cooling at specifi c fl ow rate is required depending on the processor version MEMORY SYSTEM MEMORY BOOT FLASH (UEFI) EEPROM SATA NAND FLASH HDD CFAST Up to 16GB dual channel DDR3 SDRAM running at 1600 MHz, with ECC, via two SODIMM sockets Two redundant 8 MB SPI boot fl ashes with fail-over functionality Serial EEPROM (24LC64) 64 Kbit for storing uEFI BIOS settings and serial number Up to 32GB SLC NAND Flash on a dedicated SATA NAND Flash module The SATA NAND Flash option is only available on a 4HP CP3003-SA Onboard 2.5” SATA SSD/HDD installation via CP3003-HDD extension, optionally available with two SSD/HDD Onboard CFast installation via 8HP extension ONBOARD CONTROLLER PLATFORM CONTROLLER HUB GRAPHICS GIGABIT ETHERNET UART WATCHDOG RTC TRUSTED PLATFORM MODULE (TPM) Mobile Intel® QM77 Platform Controller Hub featuring: - USB host interface with ten USB2.0 and four USB3.0 ports (only four USB2.0 and two USB3.0 ports are used on the CP3003-SA) - SATA host controller with four SATA 3Gb/s and two SATA 6Gb/s ports with RAID 0/1/5/10 support - Eight x1 PCI Express 2.0 ports operating at 5.0 GT/s (only four x1 PCI Express ports are used) - High-Defi nition Audio Interface High performance 3D graphics controller integrated in the processor: - Support for up to 3x independent graphics outputs - Supports analog display resolutions up to 2048 x 1536 pixels @ 75 Hz - Supports digital display resolutions up to 2560 x 1600 pixels @ 60 Hz - Dynamic Video Memory T echnology (DVMT) Up to three 1000BASE-T interfaces, two front/rear switchable with WOL (Wake-on-LAN) support, third available via extension CP3003-HDD, Intel 82574L Ethernet controller XR16L2750IM-F, dual UART, 16C550-compatible FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage confi guration Integrated in PCH, with 256 Byte CMOS RAM Atmel AT97SC3204 TPM 1.2 controller FRONT INTERFACES 4HP VGA USB ETHERNET LED’S 1x VGA-CRT 15-pin D-Sub connector 2x USB 2.0 ports, 4-pin standard USB connectors 2x RJ-45 with integrated LEDs (ACT, SPEED) 6x LEDs: 4x POST Code or General Purpose, WD, TH ONBOARD INTERFACES SATA CABLE CONNECTOR HIGH-SPEED EXTENSION CONNECTORS 1x onboard standard 7-pin SATA connector with locking mechanism, SATA 6Gb/s 2x high-speed connectors holding: - PCI Express - One SATA 3Gb/s - One SATA 6Gb/s - 2x USB 2.0/3.0 - 2x DisplayPort - COM1 (TTL) - HDA - LPC SATA EXTENSION CONNECTOR 1x 18-pin connector holding one SATA port for the SATA NAND Flash module REAR I/O VIA J2 The CP3003-SA supports: - 2x SATA 3Gb/s ports - 2x Gigabit Ethernet ports without LED signals - 2x USB 2.0 ports - 1x VGA analog port - 2x COM port RS-232 (LVTTL signal level) - 5x GPIs and 3x GPOs (LVTTL signal level) - Reset and Power Management signals - Option to write protect non-volatile RAMs via a special pin CP3003-SA EXPANSION CAPABILITIES

// 4 www.kontron.com TECHNICAL INFORMATION COMPACTPCI BUS INTERFACE PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz (66MHz on request), version with rear I/O via J2 Universal 5V and 3.3V PCI signalling voltage supported,

7 Req/Gnt & clock lines

Operating in system slot as system master and in peripheral slot in PCI passive mode HOT SWAP Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap Specifi cation SUPERVISORY FUNCTIONS Watchdog, software confi gurable, 125ms to 4096s in 16 steps, generates IRQ or hardware reset or dual-stage confi guration SOFTWARE SUPPORT - AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board confi guration via Shell, diskless, keyboardless, videoless operation - LAN boot support - Board identifi cation number accessible via EEPROM - Support for Windows® XP, Windows® 7, Windows® Embedded Standard 7, Windows® Server 2003/2008, Linux, VxWorks®, QNX® (Other OSs may also be used with the CP3003. Please contact Kontron for further information) COMPLIANCY - CompactPCI Core Specifi cation PICMG 2.0 Rev. 3.0 - CompactPCI Hot Swap Specifi cation PICMG 2.1 Rev. 2.0 Designed to meet or exceed: - Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1 - EMI/EMC: EN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2 GENERAL DIMENSIONS WEIGHT MTBF 3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm CP3003-SA 4HP: 320 g 274,266 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C POWER CONSUMPTION CP3003-SA with i7-3555LE DC 2.5 GHz typ. 21W CP3003-SA with i7-3612QE QC 2.1 GHz typ. 29W ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERATURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40° to +85°C, extended temp. E2 (with ULV processor) -40°C to +85ºC (without additional components) 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) CP3003-SA EXPANSION CAPABILITIES The CP3003-SA provides various expansion capabilities via specif- ically designed modules such as the SATA Flash Module, the Smart Extension Module, the CP3003-HDD module and the CP3003-XMC module. The 4HP CP3003-SA can accommodate two modules, the SATA Flash Module and the Smart Extension module. The SATA Flash Module is available with up to 32 GB SLC NAND fl ash memo- ry and can be used as storage device for onboard data or operating system data. The SATA Flash Module is specifi cally designed and optimized for embedded systems providing high performance, re- liability and security. The Smart Extension Module expands the onboard I/O capability and provides one additional SATA cable connector plus one USB 2.0 connector thereby facilitating the con- nection to system-internal USB and SATA devices. Furthermore, two extension modules are available to expand the CP3003-SA to a double-slot 8HP version, the CP3003-HDD module and the CP3003-XMC module. If more interfaces to the front are needed, the CP3003-HDD is the right choice. This module provides one USB 3.0 port, one Gigabit Ethernet interface, two DiplayPorts, and one COM interface on the front panel. In addition, the CP3003-HDD module provides support for a 2.5" SATA HDD/SSD and a CFast card. As a further extension capability of the CP3003-SA to 12HP, a SATA adapter module is available with the CP3003-HDD to provide an additional SATA con- nector for 2.5" SATA HDD/SSD devices. The 12 HP CP3003-SA does not provide a CFast socket. The CP3003-XMC module provides one x8 (or less) PCI Express 2.0-compliant interface with up to 5 GT/s for one XMC module. In addition, the CP3003-XMC module is capable of accommodating a CFast card.

// 5www.kontron.com TECHNICAL INFORMATION TECHNICAL INFORMATION  SATA FLASH MODULE SMART EXTENSION MODULE MEMORY CAPACITY NAND FLASH MEMORY BANDWITH Up to 32 GB SLC-based NAND Flash memory 32nm T oshiba Single Level Cell Components Up to 60 MB/s read rate Up to 55 MB/s write rate GENERAL DIMENSIONS WEIGHT MTBF POWER CONSUMPTION 38 x 27mm Ca. 7 grams 3,848,557 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C Typ. 0.5W, 3.3V supply ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) ONBOARD INTERFACES SATA USB One onboard angled standard SATA connector One onboard angled standard USB 2.0 connector GENERAL DIMENSIONS WEIGHT MTBF 34 x 49 mm Ca. 11 grams 6,534,579 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) // CP3003-SA WITH SATA FLASH MODULE // CP3003-SA WITH SMART EXTENSION MODULE

USB 2.0 USB 3.0 HDD RST 32 10 WD TH VGA COM CP3003 GbE A GbE B ACT SPEED SPEEDACT ACT SPEED DisplayPort DisplayPort // 6 www.kontron.com CP3003-HDD TECHNICAL INFORMATION FRONT INTERFACES (8HP) DISPLAYPORT ETHERNET USB SERIAL PORT CONTROL 2x 20-pin DisplayPort connectors, DVI/HDMI capable through passive cable adapter 1x RJ-45 with integrated LEDs (ACT, SPEED) 1x USB 3.0 port, 9-pin type-A connector 1x 16C550-compatible serial port, RS232 signalling, RJ-45 Reset button and HDD activiy LED ONBOARD INTERFACES SATA CFAST 1x SATA connector for connecting a SATA 2.5” HDD/SSD (SATA 6Gb/s), Option to add 2nd SATA HDD/SSD (results in 12HP stacking height and CFast socket won’t be available) 1x CFast card socket GENERAL WEIGHT MTBF POWER CONSUMPTION CP3003-SA 8HP: 460 g, CP3003-SA 12HP: 520 g 1,120,458 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C typ. 0.5W, without peripheral devices connected ENVIRONMENTAL OPERATING TEMPERATURE STORAGE TEMPERTURE CLIMATIC HUMIDITY 0°C to +60°C, standard -40°C to +85°C, extended temperature -40°C to +85ºC (without additional components) 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) // CP3003-SA 12HP

// 7 www.kontron.com EUROPE, MIDDLE EAST & AFRICA Lise-Meitner-Str. 3-5

86156 Augsburg

T el.: + 49 821 4086 0 Fax: + 49 821 4086 111 info@kontron.com CORPORATE OFFICES NORTH AMERICA

14118 Stowe Drive

Poway, CA 92064-7147 USA T el.: + 1 888 294 4558 Fax: + 1 858 677 0898 info@us.kontron.com  ASIA PACIFIC 1~2F, 10 Building, No. 8 Liangshuihe 2nd Street, Economical & T echnological Development Zone, Beijing, 100176, P.R.China T el.: +86 10 63751188 Fax: +86 10 83682438 info@kontron.cn Copyright © 2015 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purpos es. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered tra demarks are the property of their respective owners and are recognized. Specifi cations are subject to change without notice. CP3003-SA-20150715 - WMH ORDERING INFORMATION ARTICLE DESCRIPTION CP3003-SA CONFIGURATIONS CP3003-SA-2.1Q-8-4F-T Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, Front I/O, with TPM CP3003-SA-2.1Q-8-4R-T Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, Rear I/O, with TPM CP3003-SA-2.1Q-8-8R-T Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Rear I/O, with TPM CP3003-SA-2.5D-4-8F-T Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Front I/O, with TPM CP3003-SA-2.5D-8-8R-T Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Rear I/O, with TPM CP3003-SA-2.5D-8-8XR-T Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-XMC, Rear I/O, with TPM CP3003-SA-1.7D-4-4F-E2-T Core i7-3517UE, Dual-Core 1.7GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 4HP, Front I/O, extended temp. E2, with TPM CP3003-SA-1.7D-8-8R-E2-T Core i7-3517UE, Dual-Core 1.7GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Rear I/O, extended temp. E2, with TPM FLASH STORAGE (as separate items, not mounted on the CPU) FLASH-SATA-XGB-CP3002/ CP3003 SATA NAND Flash module, various sizes available CFASTX Industrial grade CFast, various sizes available REAR TRANSITION MODULES CP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors) CP-RIO3-04 8HP rear I/O module (additional to 4HP COM1/2) CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors) SOFTWARE VXW-BSP-CP3003-SA-V6.9.2 VxWorks 6.9.2 Board Support Package QNX-BSP-CP3003-SA-V6.5 QNX6.5 Board Support Package NOTES: » Windows and Linux BSPs are only available as download on the web page » The SATA NAND Flash module cannot be used in conjunction with the CP3003-HDD/CP3003-XMC module Please contact your local sales representative for other confi guration options.