CP3002

CP3002 KONTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

Intel® Core™ i7 / Celeron® 3U CompactPCI BOARD  outstanding performance  fast and reliable data storage  comprehensive I/O capabilities

COMA & COMB (LVTTL, 3.3V) Intel® QM57 Front Panel POST Code / Debug / Gen. Purpose Front Panel LEDs FPGA Board Control CompactPCI Connector COMA & COMB or GPIO SFF XDP Debug SPI EEP BIOS 3.3V and 5V 2nd BIOS FLASH 1st BIOS FLASH Intel® Core™ i7 BGA DDR3 DDR3 DMI

1066 MHz

SATA Ext.for SATA Flash Module USB DMI LPC SMBus SPI USB SATA USB type-A PCI FDI FDI VGA VGA USB 2x SATA 2x SATA GbE GbE RJ-45 RJ-45 TPM TPM (on request) üü Gen. PCIe LPC USB type-A DSUB 15-pin USB 82574L WOL 82574L WOL SATA 7-pin PCI PCI 32bit/33 MHz 3.3V / 5V VIO 2x USB 2x USB GbE Dual UART xBus PCIe x1 PCIe SMBus High-Speed Extension Connector SATA, PCIe, HDA DP SATA 2x SATA x1 PCIe 2x USB VGAVGA Mux To Rear I/O VGA PM VGA Power Management GbE Watchdog / Thermal COMA Onboard Power Supplies DC/DC etc. USB Power 2x USB Power GbE Switch GbE Switch Rear I/O Eth Rear I/O Eth Rear I/O Eth Rear I/O Eth COMA/B USB 2.0 CP3002 GbE A GbE B USB 2.0 CP3002 GbE A GbE B // 2 www.kontron.com CP3002 Intel® Core™ i7 / Celeron® 3U CompactPCI CPU BOARD Intel®'s Core™ microarchitecture sets new standards for energy- effi cient performance and scalability by use of new technologies such as Intel® Turbo Boost technology and Intel® Smart Cache. The CP3002 is a highly integrated 3U CompactPCI CPU board based on the Intel® Core™ i7 and Celeron® processor platform combined with the Mobile Intel® QM57 Express Platform Controller Hub. The CP3002 supports the Intel® Core™ i7-610E and Core™ i7- 620LE processors with frequencies up to 2.53 GHz for high- performance needs, as well as the ULV processors Core™ i7-660UE and Celeron® U3405 for temperature- and TDP-critical applications. The integrated next generation graphics core off ers superior 3D and video performance resulting in a up to doubled graphics performance compared to previous platform designs. Memory demanding applications can make use of up to 8 GB DDR3 SDRAM with Error Checking and Correction (ECC). For onboard data storage the CP3002 off ers up to 32 GB on a dedicated SATA Flash module or a HDD/SSD and CFast option on the 8HP extension module. On the system side, the CP3002 supports a PCI 32-bit, 33MHz CompactPCI interface enabling the passive mode feature. When installed in a system master slot, the CompactPCI interface is enabled, whereas the CompactPCI interface will be isolated when installed in a peripheral slot. Unique Versatility A variety of communication interfaces like two Gigabit Ethernet ports, six USB 2.0 ports, six SATA interfaces and two serial ports either available at the front as onboard header or via Rear IO allow the CP3002 to be easily adapted to the individual application requirements. Highest Data Security The optional Trusted Platform Module (TPM) provides hardware-based encryption mechanisms to create, seal or store keys, passwords and other important data. Long-T erm Availability Investing in a new project is always a challenge and risky. Extending the lifetime of an application to the possible maximum is therefore a critical issue to save the development investments. Delivering a stable product based on Intel®‘s embedded product line, the CP3002 ensures long-term availability. This eliminates the risk of unplanned design changes and unexpected expensive application modifi cation. While minimizing deployment risks by providing a broad range of software support, the CP3002 eases the process of product integration and maximizes your competitive advantage to meet your time-to-market window.

// 3www.kontron.com TECHNICAL INFORMATION PROCESSOR Intel® Core™ i7 and Celeron® processors (32nm technology): - Core i7-620LE: 2.0 GHz, LV, 4MB L3 cache (shared instruction/data cache between both cores) - Core i7-610E: 2.53 GHz, SV, 4MB L3 cache (shared instruction/data cache between both cores) - Core i7-660UE: 1.33 GHz, ULV, 4MB L3 cache (shared instruction/data cache between both cores) - Celeron® U3405: 1.07 GHz, ULV, 2MB L3 cache (shared instruction/data cache between both cores) Please contact Kontron for further information concerning the suitability of other Intel processors for use w. the CP3002 MEMORY SYSTEM MEMORY FLASH (UEFI) EEPROM SATA NAND FLASH HDD CFAST Up to 8 GB dual channel DDR3 SDRAM running at 1066 MHz, with ECC, via two SODIMM sockets 2x redundant 8 MB SPI Flashes, with fail-over functionality Serial EEPROM (24LC64) 64 Kbit for storing uEFI BIOS settings and serial number Up to 32 GB SLC NAND Flash on a dedicated SATA NAND Flash module The SATA NAND Flash option is only available on a 4HP CP3002 Onboard 2.5” SATA HDD installation via 8HP mezzanine Onboard CFast installation via 8HP mezzanine ONBOARD CONTROLLER PLATFORM CONTROLLER HUB VGA GIGABIT ETHERNET UART WATCHDOG RTC TRUSTED PLATFORM MODULE (TPM) Mobile Intel® QM57 Express Chipset: - SATA host controller with six ports with RAID 0/1/5/10 support - USB 2.0 host interface with up to 14 ports (six ports are used on the CP3002) - Two PCI Express x4 or eight PCI Express x1 2.0 ports (only two PCI Express x1 are used) High performance 3D graphics controller integrated in the processor: - Support for two independent displays - Supports digital display resolutions up to 2560 x 1600 pixels @ 60Hz - Supports analog display resolutions up to 2048 x 1536 pixels @ 75Hz - Dynamic Video Memory T echnology (DVMT), up to 352 MB 2x GbE, front or rear (switchable), Intel 82574L Ethernet controller, WOL (Wake-On-LAN) support XR16L2750IM-F, dual UART, 16C550-compatible FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, Reset, dual-stage Integrated in QM57 with 256 Byte CMOS RAM Infi neon SLB9635TT TPM 1.2 controller, optional FRONT INTERFACES 4HP VGA USB ETHERNET LED’S 1x VGA-CRT 15-pin D-Sub connector 2x USB 2.0 ports, 4-pin standard USB connectors 2x RJ45 with integrated LEDs (ACT, SPEED) 6x LED’s: 4x POST Code or General Purpose, WD, TH FRONT INTERFACES 8HP (ADDITIONAL TO 4HP) DVI USB COM CONTROL 1x 29-pin DVI-D connector 2x USB 2.0 ports, 4-pin standard USB connectors 1x 9-pin D-Sub connector, RS-232 signalling Reset button and HDD LED ONBOARD INTERFACES SERIAL ATA HIGH-SPEED I/O CONNECTOR I/O EXTENSION CONNECTOR 1x onboard standard SATA connector The high-speed I/O connector to the extension module holds the following signals: - PCI Express - Two SATA II - Two USB 2.0 - One DisplayPort - One COM port RS-232 - HDA - LPC 18-pin I/O extension connector holding 1x SATA port for the SATA NAND Flash module REAR I/O VIA J2 The CP3002 supports: - Two SATA II ports - Two Gigabit Ethernet ports without LED signals - Two USB 2.0 ports - One VGA analog port - Two COM ports (LVTTL signal level) - Five GPIs and Three GPOs (LVTTL signal level) - Power management signals COMPACTPCI BUS INTERFACE - PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz, version with rear I/O via J2 - Universal 5V and 3.3V PCI signalling voltage supported,

7 Req/Gnt & clock lines

• Operating in system slot as system master and in peripheral slot in PCI passive mode SUPERVISORY FUNCTIONS Watchdog, software confi gurable, 125ms to 4096s in 16 steps, generates IRQ or hardware reset, dual-stage confi guration HOT SWAP Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap Specifi cation

// 4www.kontron.com TECHNICAL INFORMATION COMPLIANCY - CompactPCI Core Specifi cation PICMG 2.0 Rev. 3.0 - CompactPCI Hot Swap Specifi cation PICMG 2.1 Rev. 2.0 Designed to meet or exceed: - Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1 - EMI/EMC: EN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2 GENERAL DIMENSIONS WEIGHT MTBF 100 x 160mm, 3U, 4HP or 8HP CP3002 4HP: 340 g CP3002 8HP: 480 g CP3002: 250,129 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30° CP3002-HDD: 1,901,991 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30° SOFTWARE SUPPORT - AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, Board confi guration via Shell, diskless, keyboardless, videoless operation - LAN boot support - Board identifi cation number accessible via EEPROM - Support for Windows® XP, Windows® 7, Windows® Embedded Standard 7, Windows® Server 2003, Windows® Server 2008, Linux®, Wind River Linux, VxWorks®, QNX® (Other OSs may also be used with the CP3002. Please contact Kontron for further information.) POWER CONSUMPTION Core i7-620LE 2.0 GHz and 4GB memory typ. 28W ENVIRONMENTAL OPERATING TEMP. STORAGE TEMP. CLIMATIC HUMIDITY 0°C to 60ºC, standard, extended temp. -25°C to 70°C on project request -40°C to +85ºC (without additional components) 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-7)

// 5 www.kontron.com EUROPE, MIDDLE EAST & AFRICA Lise-Meitner-Str. 3-5

86156 Augsburg

T el.: + 49 821 4086 0 Fax: + 49 821 4086 111 info@kontron.com CORPORATE OFFICES NORTH AMERICA

14118 Stowe Drive

Poway, CA 92064-7147 USA T el.: + 1 888 294 4558 Fax: + 1 858 677 0898 info@us.kontron.com  ASIA PACIFIC 1~2F, 10 Building, No. 8 Liangshuihe 2nd Street, Economical & T echnological Development Zone, Beijing, 100176, P.R.China T el.: +86 10 63751188 Fax: +86 10 83682438 info@kontron.cn Copyright © 2015 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purpos es. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered tra demarks are the property of their respective owners and are recognized. Specifi cations are subject to change without notice. CP3002-20150715 - WMH ORDERING INFORMATION ARTICLE DESCRIPTION CP3002-SA-2.0D-4-8F Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O CP3002-SA-2.0D-4-8F-C Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with conformal coating CP3002-SA-2.0D-4-8F-S8 Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with SATA Flash 8GB CP3002-SA-2.0D-4-8R Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O CP3002-SA-2.0D-4-8R-EX Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range CP3002-SA-2.0D-4-8R-EX-C Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range, with conformal coating CP3002-SA-2.0D-8-4F Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 4HP, Front I/O CP3002-SA-2.0D-8-8R Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O CP3002-SA-2.0D-8-8R-EX-C Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range, with conformal coating CP3002-SA-2.53D-4-4F Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Front I/O CP3002-SA-2.53D-4-4F-S16 Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Front I/O, with SATA Flash 16GB CP3002-SA-2.53D-4-8F Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O CP3002-SA-2.53D-4-4R Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Rear I/O CP3002-SA-2.53D-4-4R-S16 Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Rear I/O, with SATA Flash 16GB CP3002-SA-2.53D-4-8R Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O CP3002-SA-2.53D-8-8F Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP, Front I/O CP3002-SA-2.53D-8-8F-C Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with conformal coating CP3002-SA-2.53D-8-8F-HK Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with HDD King Size CP3002-SA-2.53D-8-4R-S8 Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 4HP, Rear I/O, with SATA Flash 8GB CP3002-SA-2.53D-8-8R Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O FLASH STORAGE (AS SEPARATE ITEM, NOT MOUNTED ON THE CPU) FLASH-SATA-XGB-CP3002/ CP3003 SATA NAND Flash module, various sizes available CFASTX Industrial grade CFast, various sizes available REAR TRANSITION MODULE CP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors) CP-RIO3-04 8HP rear I/O module (additional to 4HP COM1/2) CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors) SOFTWARE VXW-BSP-CP3002 (-RC/-RA)-V6.9.1 VxWorks 6.9.1 Board Support Package Please contact your local sales representative for other confi guration options.