7630035 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
ORIGINAL INSTRUCTIONS DL0424 MOBILE WORK TABLE MODEL NO: CMWT35 PART NO: 7630035
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com INTRODUCTION Thank you for purchasing this CLARKE Mobile Work Table. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. Please keep these instructions in a safe place for future reference. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. ENVIRONMENTAL PROTECTION DO NOT dispose of old products or damaged parts with general household waste. All tools, accessories and packaging no longer required should be sorted, taken to a recycling centre and disposed of appropriately.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
DESCRIPTION
This mobile work table consists of a wide table tray, an adjustable height support column and four wheels. This work table is a movable multi-function tool table, NOT a heavy support equipment or transport table. Please pay attention to the maximum load weight capacity. SPECIFICATION SAFETY 1. Ensure that this user manual is read and understood by everybody that will be using this work table. 2. Take care when placing a load on to the work table. It should be placed gently so that the strain is taken up gradually. 3. NEVER exceed the maximum load weight of 35kg. 4. DO NOT move the table while it is carrying excessive weight. 5. ALWA YS ensure you are working on a firm flat stable surface. 6. DO NOT mount/directly attach power tools on to the work table. 7. NEVER stand on the work table. 8. Before use, ALWA YS ensure that the locking pin is securely positioned and the wheel locks are in proper working condition. Failure to follow these instructions may result in personal injury or equipment damage. 9. AVOID storing the work table outside or in humid environments. Product Description Mobile Work Table - CMWT35 Part Number 7630035 Work Table Weight 17.5kg Maximum Load Weight 35kg (77.16lb) Evenly Loaded Measurements Height Max.: 1285mm Height Min.: 940mm Width: 760mm Depth: 740mm Tool Tray Working Area Depth: 750mm Width: 520mm
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com ASSEMBLY 1. Place a nut (2) into each end of the leg section (1), as shown. 2. Place a bolt (3) through each castor (4&5) and the leg section and tighten into place. Make sure that the 2 locking casters (5) are positioned at the cross section end of each leg, as shown 3. Place a rubber stopper (6) over each end of the leg sections, as shown.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com 4. Place the table support (7 ) onto the leg section, with the rubber protection side facing inward as shown. 5. Place the 4 M8 bolts (8) into the hole s at the base of the table support and tighten using the washers (9) and nuts (10) from underneath the leg section. 6. Place the tool table section (11) into the table support, as shown.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com 7. Place the running bolt (12) into the nu t in the side of the table support. This is to stop the tool table section being lifted out inadvertently. 8. Move the tool table section up or down to the height required and lock in place using the locking pin (13). 9. Pull the tool table top up to the horizo ntal and insert the fixing pin (14) in place, as shown. MAINTENANCE 1. When not in use, lower the position of the tool table to the lowest position, and pull out the fixing pin of the table panel to place the table in the folded state. 2. After each use, remove any accessor ies or tools and clean the table to prevent oil pollution. 3. Regularly check whether the caster s are flexible and the brakes work correctly. If there is any movement problems, replace the casters.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com OVERVIEW