CM400DY-12NF

CM400DY-12NF POWEREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Dual IGBTMOD™ NF-Series Module

400 Amperes/600 Volts

Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Outline Drawing and Circuit Diagram Description: Powerex IGBTMOD™ Modules are designed for use in switching applications. Each module consists of two IGBT Transistors in a half- bridge configuration with each tran- sistor having a reverse-connected super-fast recovery free-wheel diode. All components and inter- connects are isolated from the heat sinking baseplate, offering simpli- fied system assembly and thermal management. Features: £ Low Drive Power £ Low VCE(sat) £ Discrete Super-Fast Recovery Free-Wheel Diode £ Isolated Baseplate for Easy Heat Sinking Applications: £ AC Motor Control £ UPS £ Battery Powered Supplies Ordering Information: Example: Select the complete part module number you desire from the table below -i.e. CM400DY -12NF is a 600V (VCES),

400 Ampere Dual IGBTMOD™

Power Module. Type Current Rating VCES Amperes Volts (x 50) CM 400 12 Dimensions Inches Millimeters A 4.25 108.0 B 2.44 62.0 F 0.98 25.0 G 0.24 6.0 H 0.59 15.0 K 0.55 14.0 L 0.26 Dia. Dia. 6.5 M M6 Metric M6 Dimensions Inches Millimeters N 1.18 30.0 P 0.71 18.0 Q 0.28 7.0 R 0.87 22.2 S 0.33 8.5 T 0.02 0.5 U 0.110 2.8 V 0.16 4.0 W 0.85 21.5 X 0.94 24.0 A XW FF B N L (4 PLACES) D M NUTS (3 PLACES) G G H KKK P P P T THICK U WIDTHQQ VC S R C1E2C2E1 TC MEASURED POINT (BASEPLATE) LABEL C2E1 E2 C1 E

Dual IGBTMOD™ NF-Series Module Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM400DY-12NF Dual IGBTMOD™ NF-Series Module Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol CM400DY-12NF Units Junction Temperature Tj –40 to 150 °C Storage Temperature Tstg –40 to 125 °C Collector-Emitter Voltage (G-E Short) VCES 600 Volts Gate-Emitter Voltage (C-E Short) VGES ±20 Volts Collector Current*** (DC, TC' = 92°C) IC 400 Amperes Peak Collector Current ICM 800* Amperes Emitter Current (TC = 25°C) IE 400 Amperes Peak Emitter Current IEM 800* Amperes Maximum Collector Dissipation (TC = 25°C, Tj ≤ 150°C) PC 1130 Watts Mounting Torque, M6 Main Terminal — 40 in-lb Mounting Torque, M6 Mounting — 40 in-lb Weight — 400 Grams Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) VISO 2500 Volts Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Collector-Cutoff Current ICES VCE = VCES, VGE = 0V — — 1.0 mA Gate Leakage Current IGES VGE = VGES, VCE = 0V — — 0.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 40mA, VCE = 10V 5.0 6.0 7.5 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 400A, VGE = 15V, Tj = 25°C — 1.7 2.2 Volts IC = 400A, VGE = 15V, Tj = 125°C — 1.7 — Volts Total Gate Charge QG VCC = 300V, IC = 400A, VGE = 15V — 1600 — nC Emitter-Collector Voltage VEC IE = 400A, VGE = 0V — — 2.6 Volts Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Input Capacitance Cies — — 60 nf Output Capacitance Coes VCE = 10V, VGE = 0V — — 7.3 nf Reverse Transfer Capacitance Cres — — 2.4 nf Inductive Turn-on Delay Time td(on) — — 300 ns Load Rise Time tr VCC = 300V, IC = 400A, — — 200 ns Switch Turn-off Delay Time td(off) VGE1 = VGE2 = 15V, RG = 3.1Ω, — — 450 ns Time Fall Time tf Inductive Load — — 300 ns Diode Reverse Recovery Time trr Switching Operation, — — 250 ns Diode Reverse Recovery Charge** Qrr IE = 400A — 6.8 — µC *Pulse width and repetition rate should be such that device junction temperature (T j) does not exceed Tj(max) rating. Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi) *Tc' measured point is just under the chips. If this vaule is used, Rth(f-a) should be measured just under the chips .

Dual IGBTMOD™ NF-Series Module Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM400DY-12NF Dual IGBTMOD™ NF-Series Module Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Resistance, Junction to Case Rth(j-c)Q Per IGBT 1/2 Module, TC Reference — — 0.11 °C/W Point per Outline Drawing Thermal Resistance, Junction to Case Rth(j-c)D Per FWDi 1/2 Module, TC Reference — — 0.19 °C/W Point per Outline Drawing Thermal Resistance, Junction to Case Rth(j-c)'Q Per IGBT 1/2 Module, — — 0.066 °C/W TC Reference Point Under Chips Contact Thermal Resistance Rth(c-f) Per 1/2 Module, Thermal Grease Applied — 0.04 — °C/W External Gate Resistance RG 1.6 — 16 Ω COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) CAPACITANCE, Cies, Coes, Cres, (nF) CAPACITANCE VS. VCE(TYPICAL) 100 102 102 101 100 10-1 1010 1 3 42 5 101 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) 102 103 EMITTER CURRENT, IE, (AMPERES) GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 6 8 10 1412 16 18 20 Tj = 25°C COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 0 200 600 800 VGE = 15V Tj = 25°C Tj = 125°C VGE = 0V Cies Coes Cres IC = 800A IC = 400A IC = 160A COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL) 0 2 4 6 8 1 0 200 VGE = 20V Tj = 25oC 400 600 800 400 10-1 COLLECTOR CURRENT, IC, (AMPERES) 103 101 102 102 100 101 SWITCHING TIME, (ns) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) td(off) td(on) tr VCC = 300V VGE = ±15V RG = 3.1Ω Tj = 125°C Inductive Load tf 103 Tj = 25°C Tj = 125°C

Dual IGBTMOD™ NF-Series Module Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 TIME, (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi) 100 10-5 10-4 10-3 10-1 10-2 10-3 10-3 10-2 10-1 100 101 10-1 10-2 10-3 Zth = Rth • (NORMALIZED VALUE) Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.11°C/W (IGBT) Rth(j-c) = 0.19°C/W (FWDi) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') GATE CHARGE, QG, (nC) GATE-EMITTER VOLTAGE, VGE, (VOLTS) GATE CHARGE VS. VGE 500 1000 1500 25002000 VCC = 300V EMITTER CURRENT, IE, (AMPERES) REVERSE RECOVERY TIME, trr, (ns) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 103 101 102 102 101 103 102 101 REVERSE RECOVERY CURRENT, Irr, (AMPERES) VCC = 300V VGE = ±15V RG = 3.1Ω Tj = 25°C Inductive Load VCC = 200V IC = 400A 103 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, ESW( on), ESW( off), (mJ/PULSE) 102 101 102 101 100 VCC = 300V VGE = ±15V RG = 3.1Ω Tj = 125°C Inductive Load C Snubber at Bus VCC = 300V VGE = ±15V IC = 400A Tj = 125°C Inductive Load C Snubber at Bus 103 SWITCHING LOSS VS. COLLECTOR CURRENT (TYPICAL) GATE RESISTANCE, RG, (Ω) SWITCHING LOSS, ESW( on), ESW( off), (mJ/PULSE) 102 100 101 101 100 102 SWITCHING LOSS VS. GATE RESISTANCE (TYPICAL) ESW(on) ESW(off) ESW(on) ESW(off) Irr trr