CLB800M12HM3P WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power CLB800M12HM3P , CLB800M12HM3PT

1200 V, 800 A, Silicon Carbide, Common-Source Module

  • Low Inductance, Low Profile 62 mm Footprint
  • High Junction Temperature (175 °C) Operation
  • Implements Gen 3+ SiC MOSFET Technology with Improved Conduction Loss
  • Light Weight AlSiC Baseplate
  • High Reliability Silicon Nitride Insulator Typical Applications
  • Solid State Circuit Breakers
  • EV Battery Disconnect
  • T-type Inverters
  • Four-Quadrant Power Converters
  • UPS and SMPS VDS 1200 V IDS 800 A System Benefits
  • Lightweight, Compact Form Factor with 62 mm Compatible Baseplate Enables System Retrofit
  • Increased System Efficiency, due to Low Switching & Conduction Losses of SiC
  • High Reliability Material Selection Parameter Symbol Min. Typ. Max. Unit Conditions Note Drain-Source Voltage VDS 1200 VGate-Source Voltage, Maximum Value VGS(max) -8 +19 Transient Note 1 Fig. 19Gate-Source Voltage, Recommended VGS(op) -4/+15 Static DC Continuous Drain Current ID 1051 A VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C Notes 2, 3 Fig. 13

791 VGS = 15 V, TC = 90 °C, TVJ ≤ 175 °C

DC Source-Drain Current (Body Diode) ISD(BD) 512 VGS = -4 V, TC = 25 °C, TVJ ≤ 175 °C Pulsed Drain-Source Current IDM 3164 tPmax limited by TVJmax VGS = 15 V, TC = 25 °C Power Dissipation PD 2540 W TC = 25 °C, TVJ ≤ 175 °C Note 4 Fig. 14 Virtual Junction Temperature TVJ(op) -40 175 °C Maximum Parameters (Verified by Design) Note (1): Recommended turn-on gate voltage is 15 V with ±5 % regulation tolerance Note (2): Current limit calculated by ID(max) = √(PD/RDS(typ)(TVJ(max),ID(max))) Note (3): Verified by design Note (4): PD = (TVJ - TC)/RTH(JC,typ) Rev. 3, May 2025 Mid NTC1 NTC2 -t°

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Parameter Symbol Min. Typ. Max. Unit Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1200 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.3 2.5 3.9 VDS = VGS, ID = 255 mA

2.0 VDS = VGS, ID = 255 mA, TVJ = 175 °C

Zero Gate Voltage Drain Current IDSS 12 384 μA VGS = 0 V, VDS = 1200 V Gate-Source Leakage Current IGSS 0.12 1.2 VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (Devices Only) RDS(on) 1.3 1.7 mΩ VGS = 15 V, ID = 800 A Fig. 2 Fig. 32.3 VGS = 15 V, ID = 800 A, TVJ = 175 °C Transconductance gfs 619 S VDS = 20 V, IDS = 800 A Fig. 4

573 VDS = 20 V, IDS = 800 A, TVJ = 175 °C

Internal Gate Resistance RG(int) 0.48 Ω f = 100 kHz Input Capacitance Ciss 94.9 nF VGS = 0 V, VDS = 800 V, VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 3.1 Reverse Transfer Capacitance Crss 180 pF Gate to Source Charge QGS 888 nC VDS = 800 V, VGS = -4 V/15 V ID = 800 A Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 804 Total Gate Charge QG 2784 Short Circuit Energy ESC 11.7 J VBUS = 800 V, VGS = -4/15 V, RG(EXT) = 5 Ω, TVJ = 175 °C, tSC < 1.54 μs, Lstray,SC = 8.4 nH Notes 5, 6 FET Thermal Resistance, Junction to Case Rth JC 0.059 °C/W Fig. 11 MOSFET Characteristics (Per Position) (TVJ = 25 °C Unless Otherwise Specified) Parameter Symbol Min. Typ. Max. Unit Conditions Note Body Diode Forward Voltage VSD 5.7 V VGS = -4 V, ISD = 800 A Fig. 7

5.2 VGS = -4 V, ISD = 800 A, TVJ = 175 °C

Diode Characteristics (Per Position) (TVJ = 25 °C Unless Otherwise Specified) Rev. 3, May 2025 C L B 8 0 0 M1 2 H M 3 P, CLB800M12HM3PT Note (5): Refer to PRD-08296 Note (6): VDSmax depends on effective short circuit stray inductance (Lstray,SC), VDSmax = VBUS + Lstray,SC·di/dt

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Parameter Symbol Min. Typ. Max. Unit Conditions Resistance at 25 °C R25 4700 Ω TNTC = 25 °C Tolerance of R25 ±1 % Beta Value for 25 °C to 85 °C B25/85 3435 K Beta Value for 0 °C to 100 °C B0/100 3399 K Tolerance of B25/85 ±1 % Maximum Power Dissipation P25 50 mW Temperature Sensor (NTC) Characteristics Steinhart & Hart Coefficients for NTC Resistance & NTC Temperature Computation (T in K) Module Physical Characteristics Note (5): Total Effective Resistance (Per Switch Position) = MOSFET RDS(on) + Switch Position Package Resistance Parameter Symbol Min. Typ. Max. Unit Conditions Package Resistance, M1 R1-2 106.5 μΩ TC = 125 °C, Note 5 Package Resistance, M2 R2-3 126.3 TC = 125 °C, Note 5 Stray Inductance LStray 4.9 nH Between Terminals 1 and 3 Case Temperature TC -40 125 °C Weight W 179 g Mounting Torque MS 4.5 6.0 N-m Baseplate, M6 Bolts 0.9 1.1 1.3 Power Terminals, M4 × 0.7 mm Bolts Case Isolation Voltage Visol 4 kV AC, 50 Hz, 1 min Comparative Tracking Index CTI 600 Clearance Distance 9.43 mm Terminal to Terminal

12.70 Terminal to Baseplate

13.05 Terminal to Terminal

15.30 Terminal to Baseplate

3.354E-03 3.001E-04 5.085E-06 2.188E-07 Rev. 3, May 2025 C L B 8 0 0 M1 2 H M 3 P, CLB800M12HM3PT

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice.

0 A 0 AQRR

Figure 18. Reverse Recovery Definitions Figure 19. VGS Transient Definitions Figure 16. Turn-Off Transient Definitions Figure 17. Turn-On Transient Definitions

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Schematic and Pin Out Package Dimensions (mm) PIN OUT SCHEME PIN LABEL 1 D1

2 Mid

4 G1, Top row pins (2)

5 K1, Bottom row pins (2)

6 G2, Top row pins (2)

7 K2, Bottom row pins (2)

8 NTC1

9 NTC2

-t° 4× 6.6±0.25 D2 D3 D1 D1 4× 12 0.5 A XXXXXX-XXXX 9× M4 POWER TERMINAL CONNECTION POINTS DATE CODE PART NUMBER DM CODE UL MARKING, SHADED OR OUTLINE, FOR UL REGISTERED MODULES WOLFSTREAK LOGO 0.30

3 SURFACES

9× 4.25 MAX BOLT PENETRATION DEPTH C10 C8 C10 DETAIL A SCALE: 4 : 1 3× R0.8 D6 D6 D6 XXXXXXXXXXXX NOTE: ALL MARKINGS SHALL CONFORM TO PRC-00786. DIMENSION TABLE SYMBOL DIMENSION TOLERANCE A1 110 0.60 A2 109.25 0.60 A3 65 0.60 A4 64.25 0.60 A5 3.25 0.40 A6 11.45 0.60 B1 93 0.30 B2 48 0.30 C1 11.29 0.40 C2 13.83 0.40 C3 24 0.40 C4 34.17 0.40 C5 36.71 0.40 C6 1.71 0.40 C7 17.84 0.75 C8 2.54 0.30 C9 0.64 0.30 C10 10.17 0.40 D1 23.75 0.50 D2 23.13 0.50 D3 24.13 0.50 D4 12.65 0.50 D5 71 0.30 D6 10.75 0.50 Rev. 3, May 2025 C L B 8 0 0 M1 2 H M 3 P, CLB800M12HM3PT Note (7): To improve product traceability, Wolfspeed products include Data Matrix Content barcodes in the form of ZZZZZZZZZZZ- DDDDDD-XXXX-NNNNNNNNNN, where -Z, -D, -X/-N represent product number, date code, and module serial number, respectively. For instance, CLB800M12HM3P-FA2036-0042-6706546042 is a CLB800M12HM3P produced in 2020 week 36 with a unique serial number. Note (8): CLB800M12HM3P has been certified by UL as an “Electrically Isolated Semiconductor Devices – Component” in accordance with UL 1557. Only power modules that bear the UL marking shown in the Package Dimension figure above should be considered as being covered under the UL Component Recognition Program.

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Supporting Links & Tools Rev. 3, May 2025 Product Ordering Code Part Number Description CLB800M12HM3P Without Pre-Applied Phase Change Thermal Interface Material CLB800M12HM3PT With Pre-Applied Phase Change Thermal Interface Material C L B 8 0 0 M1 2 H M 3 P, CLB800M12HM3PT Evaluation Tools & Support

  • SpeedFit 2.0 Design Simulator™
  • Technical Support Forum
  • LTspice and PLECS Models Dual-Channel Gate Driver Board
  • CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers
  • CGD1700HB2M-UNA: Wolfspeed Gate Driver Board
  • EVAL-ADUM4146WHB1Z: Analog Devices® Gate Driver Board
  • UCC21710QDWEVM-054: Texas Instruments® Gate Driver Board Application Notes
  • PRD-04814: Design Options for Wolfspeed® Silicon Carbide MOSFET Gate Bias Power Supplies
  • PRD-06379: Environmental Considerations for Power Electronics Systems
  • PRD-08333: Wolfspeed Module CIL Evaluation Kits User Guide
  • PRD-07933: Wolfspeed Power Module Thermal Interface Material Application User Guide
  • PRD-08376: Thermal Characterization Methods and Applications
  • PRD-07845: Power Module Baseplate Capacitance and Electromagnetic Compatibility
  • PRD-08710: Measuring Stray Inductance in Power Electronics Systems
  • PRD-08911: Considerations for Current Balancing in Paralleled SiC Power Modules
  • PRD-09035: Power Module RC Thermal Models User Guide
  • PRD-08296: SiC MOSFET Short Circuit Application Note

© 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimers WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAUL TS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety-related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Rev. 3, May 2025 C L B 8 0 0 M1 2 H M 3 P, CLB800M12HM3PT