CL620 LUMINIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Toll free: 866.586.4647 Fax: 514.683.8872

260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5

TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE COLUMN VOLTAGE FINISH OPTION OPTION OPTION 1- Heavy cast aluminum top cover with embedded heat sink. 2- Ø 6” (152) High impact white translucent acrylic diffuser UV stabilized. Available in three acrylic lengths: 27” (686), 51” (1295) and 72” (1829). 3- LED array. 4- Cast aluminum driver housing. 5- Ø 6” (152) Extruded aluminum column. MATERIALS LumiSTIK column is made of 6061-T6 extruded aluminum alloy. All other cast parts are corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination. LumiSTIK column is available in three standard acrylic lengths. Other lengths are available on request. ELECTRICAL DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. LED Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. LIFE 50,000hrs L85B50 (based on IESNA TM-21 Test Method and LM-80 data). FINISH Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. MOUNTING LumiSTIK column is designed for ease of access and installation. The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18”LG galvanized anchor bolts. Accessibility is done through a flush mount 2”X4” (100X178) hand hole cover plate. Oct 2017 Rev 0 CL620/CL640/CL670 SERIES LumiSTIK - LED 6” COLUMN CL620/CL640/CL670 LumiStick CL620 - 27” (686) CL640 - 51” (1295) CL670 - 72” (1829)

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Toll free: 866.586.4647 Fax: 514.683.8872 TYPICAL PHOTOMETRY SUMMARY MODEL SELECTION LUMINAIRE SELECTION OPTIONS NOTES 1- Luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Cast aluminum top & base covers are as follows for selected wood grain finishes: BZT paired with NMR; SGT paired with NMO; BGT paired with NTW (Other colors available. Please contact factory). 3- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires (except for other types of mounting). 4- GFI and CGF options are installed 24” above grade unless otherwise specified. 5- BNF, 2BNF, BNF180 & 2BNF180 are factory set in position as required. Location along pole to be specified. ELECTRICAL ACCESSORIES GFI Ground fault interruption receptacle4 CGF Ground fault interruption with clear in-use cover 4 BNF Fixed 24” banner support (single arm at top) 5 2BNF Two fixed 24” banner supports (arm at top & bottom) 5 BNF180 Two fixed 24” banner supports at 180º (arms at top only) 5 2BNF180 Four fixed 24” banner supports at 180º (arms at top & bottom) 5 FS Fuse3 PH Photocell3 347L 347V input power driver SP Surge protector 10KV NOTE: LumiSTIK column is composed of five parts. Please specify: Model #, LED light source, OAH column, voltage and finish. Ex: CL640-L336W45-CLP6117-120-BKT CL620/CL640/CL670 SERIES LumiSTIK - LED CL620 CL640 CL670 27” 51” 72” STANDARD COLORS WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne SGT Steel Gray BGT English Cream OPTIONAL COLORS Wood grain finishes NMR Mahogany red2 NMO Maple oak2 NTW Teak wood2 Base column only CS Custom color RAL RAL# color (Refer to color chart) 120V 277V Optional 347V VOLTAGE1 FINISHLED LIGHT SELECTION (4000K/80CRI) CL620 CL640 CL670 L168W45 45W 3780 L168W65 65W 5395 L336W45 45W 3870 L336W65 65W 5525 L336W100 100W 8400 L504W65 65W 5655 L504W100 100W 8500 INPUT DELIVERED SUFFIX WATTS LUMENS 96” 123” 144” 120” 147” 168” 144” 171” 192” 168” 195” 216” 192” 219” 240” CLP669 CLP693 CLP6117 CLP6141 CLP6165 OAH COLUMN SELECTION (OAH Column consists of acrylic + pole) POLE FOR: CL620 CL640 CL670 LIGHT Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 2700K CCT 80 CRI (LCF: 0.91) K3 3000K CCT 80 CRI (LCF: 0.94) K35 3500K CCT 80 CRI (LCF: 0.98) NOTE: Other CCT & higher CRI available, please consult factory. Select acrylic length OAH assembly

Luminaires may be altered for design improvements or discontinued without prior notice. Toll free: 866.586.4647 Fax: 514.683.8872 LUMINIS.COMLUMINIS Oct 2017 Rev 0 MOUNTING INFORMATION CL620/CL640/CL670 SERIES LumiSTIK - LED 9” (229) 10” (254) Bolt circle PLAN VIEW Orientation parallel to curb or walkway 10.3” (262) Hand hole position Base cover line 12.5” (318) Dia. 18” (457) 4.87” (124) 2.8” (71) Anchor bolt projection above finished grade. The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18”LG galvanized anchor bolts. MOUNTING ACCESSORIES BNF: Fixed 24” banner support 2BNF: Two fixed 24” banner supports BNF180: Two fixed 24” banner supports at 180º 2BNF180: Four fixed 24” banner supports at 180º