CD4340A POWEREX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK TM Dual SCR Isolated M odule

40 Amperes / Up to 1600 Volts

Revision Date: 01/26/2002 CD43__40A CD43 Outline Dimensions Dimension Inches Millimeters A 3.62 92 B 0.83 21 C 3.15 80 D 1.18 30 F 0.59 15 G 0.79 20 H 0.79 20 J 0.16 4 K 0.23 5.8 L 0.61 15.5 M 1.14 29 N 0.25 6.3 P 0.94 24 Q 1.18 30 R 0.71 18 S 0.11 x .03 2.8 x 0.8 T 0.25 6.3 U M5 M5 Note: Dimensions are for reference only. CD43__40A Dual SCR Isolated POW-R-BLOK TM Module Ordering Information: Select the complete nine digit module part number from the table below. Example: CD431640A is a 1600Volt,

40 Ampere Dual SCR Isolated

(x100) Current Amperes (x 1) CD43 Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. POW-R-BLOK TM has been tested and recognized by the Underwriters Laboratories. Features: /G84/G3 Electrically Isolated Heatsinking /G84/G3 DBC Alumina (Al2O3) Insulator /G84 Copper Baseplate /G84 Low Thermal Impedance for Improved Current Capability /G84 UL Recognized (E78240) Benefits: /G84/G3 No Additional Insulation Components Required /G84/G3 Easy Installation /G84/G3 No Clamping Components Required /G84 Reduce Engineering Time Applications: /G84/G3 Bridge Circuits /G84/G3 AC & DC Motor Drives /G84/G3 Battery Supplies /G84/G3 Power Supplies /G84/G3 Large IGBT Circuit Front Ends /G84/G3 Lighting Control /G84/G3 Heat & Temperature Control /G84/G3 Welders CONNECTION DIAGRAM 5 7 OUTLINE DRAWING LABEL G HF L B A R "S" FASTON TAB "U" THREAD K T C Q P N D M J

Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK TM Dual SCR Isolated M odule Revision Date: 01/26/2002 CD43__40A Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage V DRM & VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) V RSM V RRM + 100 V RMS Forward Current 180° Conduction, T C=91°C 180° Conduction, TC=91°C (AC Switch) IT(RMS) IT(RMS) A A Average Forward Current 180° Conduction, T C=91°C I T(AV) 40 A Peak One Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125°C

60 Hz, No VRRM reapplied, Tj=125°C

60 Hz, No VRRM reapplied, Tj=25°C

50 Hz, 100% VRRM reapplied, Tj=125°C

50 Hz, No VRRM reapplied, Tj=125°C

50 Hz, No VRRM reapplied, Tj=25°C

A A A A A A Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125°C A A Peak Ten Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125°C A A I2t for Fusing for One Cycle, 8.3 milliseconds 8.3 ms, 100% VRRM reapplied, Tj=125°C 8.3 ms, No VRRM reapplied, Tj=125°C 8.3 ms, No VRRM reapplied, Tj=25°C 10 ms, 100% VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=25°C I2t I2t I2t I2t I2t I2t 2330 3300 4030 2560 3610 4420 A 2 sec A2 sec A2 sec A2 sec A2 sec A2 sec Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Tj=25°C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5µs, tp > 6µs di/dt 150 A/µs Peak Gate Power Dissipation Tp < 5 ms, Tj = 125°C PGM 10 W Average Gate Power Dissipation F = 50 Hz, Tj = 125°C PG(AV) 2.5 W Peak Forward Gate Current Tp < 5 ms, Tj = 125°C IGFM 2.5 A Peak Reverse Gate Voltage Tp < 5 ms, Tj = 125°C VGRM 10 V Operating Temperature T J -40 to +125 °C Storage Temperature T stg -40 to +125 °C Max. Mounting Torque, M5 Mounting Screw on Terminals in.-Lb. Nm Max. Mounting Torque, Module to Heatsink 44 in.-Lb. Nm Module Weight, Typical 110 g 3.88 oz. V Isolation @ 25C Circuit to base, all terminals shorted together 50 – 60 Hz, 1 minute 50 – 60 Hz, 1 second Vrms Vrms 2500 3500 V V

Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK TM Dual SCR Isolated M odule Revision Date: 01/26/2002 CD43__40A Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Max. Units Repetitive Peak Forward Leakage Current I DRM Up to 1600V, T J=125°C 15 mA Repetitive Peak Reverse Leakage Current I RRM Up to 1600V, T J=125°C 15 mA Peak On-State Voltage V FM I TM=140A 1.81 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) 0.88 5.90 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125°C, I = πIT(AV) to ITSM 0.91 5.74 V mΩ VTM Coefficients, Full Range T J = 125°C, I = 15% x IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I A = B = C = D = 0.872 -1.86 E-3

5.65 E-3

4.33 E-3

Minimum dV/dt dV/dt Linear to 2/3 V DRM Tj=125°C, Gate Open Circuit

500 V/µs

Turn-Off Time (Typical) t off T J = 25°C, IT = 2A Vr = 50V, -dI/dt=10 A/µs Re-Applied dV/dt = 200 V/µs, Linear to 900 V 40 - 100 (Typical) µs Gate Trigger Current I GT T j= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load 270 150 mA mA mA Gate Trigger Voltage V GT T j= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load 4.0 2.5 1.7 Volts Volts Volts Non-Triggering Gate Voltage V GDM T j=125°C, VD=VDRM 0.25 Volts Non-Triggering Gate Current I GDM T j=125°C, VD=VDRM 6 mA Holding Current I H V D=6V, Resistive Load, Gate Open 200 mA Latching Current I L V D=6V, Resistive Load 400 mA Thermal Characteristics Characteristics Symbol Max. Units Thermal Resistance, Junction to Case DC Operation RΘJ-C Per Module, both conducting Per Junction, both conducting 0.230 0.460 °C/W °C/W Thermal Impedance Coefficients ZΘJ-C Z ΘJ-C= K1 (1-exp(-t/τ1)) + K2 (1-exp(-t/τ2)) + K3 (1-exp(-t/τ3)) + K4 (1-exp(-t/τ4)) K1 = 1.77 E-2 K2 = -1.00 E-2 K3 = 1.46 E-1 K4 = 3.07 E-1 τ1 = 4.73 E-4 τ2 = 1.67 E-3 τ3 = 9.77 E-3 τ4 = 8.76 E-2 Thermal Resistance, Case to Sink Lubricated RΘC-S Per Module 0.1 °C/W

Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK TM Dual SCR Isolated M odule Revision Date: 01/26/2002 CD43__40A 0 180 360 CONDUCTION ANGLE Maximum On-State Power Dissipation 30° 60° 90° 120° 180° 0 5 10 15 20 25 30 35 40 Average On-State Current - It(av) - Amperes Max. Power Dissipation Per SCR - Watts (Sinusoidal Waveform) 0 180 360 CONDUCT ION ANGLE Maximum On-State Power Dissipation 90°60° 30° 120° 180° 270° 360° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Average On-State Current - It(av) - Amperes Max. Power Dissipation Per SCR - Watts (Rectangular Waveform) 0 180 360 CONDUCT ION ANGLE Maximum Allowable Case Temperature 270° 180°120° 90°60°30° 360° 100 105 110 115 120 125 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Average On-State Current - It(av) - Amperes Max. Case Temperature - Tcase -°C (Rectangular Waveform) 0 180 360 CONDUCT ION ANGLE Maximum Allowable Case Temperature 120°90°60°30° 180° 100 105 110 115 120 125 0 5 10 15 20 25 30 35 40 Average On-State Current - It(av) - Amperes Max. Case Temperature - Tcase -°C (Sinusoidal Waveform) Maximum Transient Thermal Impedance 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.001 0.01 0.1 1 10 100 Time - t - Seconds Thermal Impedance - Rjc - °C/W (Junction to Case) Maximum On-State Forward Voltage Drop 10 100 1000 Instantaneous On-State Current - Itm/Ifm - Amperes On-State Voltage - Vtm / Vfm - Volts ( Tj = 125 °C )