CBB021M12FM3

CBB021M12FM3 WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Rev. 2, April 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. CBB021M12FM3, CBB021M12FM3T Technical Features

• Ultra-Low Loss
• High Frequency Operation
• Zero Turn-Off Tail Current from MOSFET
• Normally-Off, Fail-Safe Device Operation
• Optional Pre-Applied Thermal Interface Material

Applications

• DC-DC Converters
• EV Chargers
• High-Efficiency Converters / Inverters
• Renewable Energy
• Smart-Grid / Grid-Tied Distributed Generation

1200 V, 21 mΩ, Silicon Carbide, Full-Bridge Module

RDS(on) 21 mΩ System Benefits

• Enables Compact, Lightweight Systems
• Increased System Efficiency, due to Low Switching & Conduction Losses of SiC
• Reduced Thermal Requirements and System Cost Maximum Parameters (Verified by Design) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Voltage VDS 1200 VGate-Source Voltage, Maximum Value VGS max -8 +19 Transient, < 100 ns Fig. 32 Gate-Source Voltage, Recommended VGS op -4 +15 Static DC Continuous Drain Current (TVJ ≤ 150 °C) ID A VGS = 15 V, THS = 50 °C, TVJ ≤ 150 °C Fig. 20 DC Continuous Drain Current (TVJ ≤ 175 °C) 50 VGS = 15 V, THS = 50 °C, TVJ ≤ 175 °C DC Source-Drain Current (Body Diode) ISD BD 25 VGS = -4 V, THS = 50 °C, TVJ ≤ 175 °C Pulsed Drain Current ID (pulsed) 100 tPmax limited by TVJmax VGS = 15 V, THS = 50 °C Virtual Junction Temperature TVJ op -40 150 °C Operation -40 175 Intermittent with Reduced Life DC+ AC1 AC2 DC- 1 DC- 2 -t°

CBB021M12FM3, CBB021M12FM3T Rev. 2, April 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1200 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.8 2.5 3.9 VDS = VGS, ID = 17 mA

2.0 VDS = VGS, ID = 17 mA, TVJ = 150 °C

Zero Gate Voltage Drain Current IDSS 1 25 µA VGS = 0 V, VDS = 1200 V Gate-Source Leakage Current IGSS 10 100 nA VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (Devices Only) RDS(on) 21.0 28.9 mΩ VGS = 15 V, ID = 30 A Fig. 2 Fig. 332.8 VGS = 15 V, ID = 30 A, TVJ = 150 °C

38.0 VGS = 15 V, ID = 30 A, TVJ = 175 °C

S VDS = 20 V, ID = 30 A Fig. 4

27 VDS = 20 V, ID = 30 A, TVJ = 150 °C

Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 150 °C EOn 0.54 0.65 0.69 mJ VDD = 600 V, ID = 30 A, VGS = -4 V/15 V, RG(OFF) = 0.0 Ω, RG(ON) = 2.0 Ω, L = 22.7 µH Fig. 11 Fig. 13Turn-Off Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 150 °C EOff 0.043 0.064 0.068 Internal Gate Resistance RG(int) 3.3 Ω f = 100 kHz, VAC = 25 mV Input Capacitance Ciss 5.4 nF VGS = 0 V, VDS = 1000 V, VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 0.20 Reverse Transfer Capacitance Crss 17 pF Gate to Source Charge QGS 49 nC VDS = 800 V, VGS = -4 V/15 V, ID = 40 A, Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 50 Total Gate Charge QG 162 FET Thermal Resistance, Junction to Heatsink Rth JHS 1.15 °C/W Measured with Pre-Applied TIM Fig. 17 Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Notes Body Diode Forward Voltage VSD 4.9 V VGS = -4 V, ISD = 30 A Fig. 7

4.4 VGS = -4 V, ISD = 30 A, TVJ = 150 °C

Reverse Recovery Time tRR 19 ns VGS = -4 V, ISD = 30 A, VR = 600 V, di/dt = 8 A/ns, TVJ = 150 °C Fig. 33Reverse Recovery Charge QRR 0.9 µC Peak Reverse Recovery Current IRRM 74 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 150 °C ERR 0.04 0.08 0.09 mJ VDD = 600 V, ID = 30 A, VGS = -4 V/15 V, RG(ON) = 2.0 Ω, L = 22.7 µH Fig. 14

CBB021M12FM3, CBB021M12FM3T Rev. 2, April 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Package Resistance, M1, M3 (High-Side) RHS 1.6 mΩ TC = 125°C, Note 1 Package Resistance, M2, M4 (Low-Side) RLS 1.5 TC = 125°C, Note 1 Stray Inductance LStray 14.2 nH Between DC- and DC+, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 2.0 2.3 N-m M4 bolts Weight W 21 g Case Isolation Voltage Visol 3 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 200 Clearance Distance 5.0 mm Terminal to Terminal

10.0 Terminal to Heatsink

6.3 Terminal to Terminal

11.5 Terminal to Heatsink

Notes: 1 Total Effective Resistance (Per Switch Position) = MOSFET RDS(on) + Switch Position Package Resistance NTC Thermistor Characterization Parameter Symbol Min. Typ. Max. Unit Test Conditions Rated Resistance RNTC 5.0 kΩ TNTC = 25°C Resistance Tolerance at 25 °C ΔR/R -5 5 % Beta Value (T2 = 50 °C) β25/50 3380 K Beta Value (T2 = 80 °C) β25/80 3468 K Beta Value (T2 = 100 °C) β25/100 3523 K Power Dissipation PMax 10 mW TNTC = 25°C

CBB021M12FM3, CBB021M12FM3T Rev. 2, April 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Pinout Package Dimension (mm) 16.4 ±0.2 19.4 ±0.2 28.1 ±0.2 33.8 ±0.3 36.8 ±0.2 41 ±0.2 48 ±0.3 62.8 ±0.5 42.5 ±0.2 53 ±0.1 4.5 +0.1 0 2.3 0.1 x8.5 +0.3 12 ±0.35 16.4 ±0.5 1.3 ±0.2 0.200 22.4 25.6 3.2 9.6 19.2 22.4 25.6 6.4 12.8 9.6 12.8 28.8 (1) Pin Positions Tolerance 0.4 B C 16.4 ±0.2 19.4 ±0.2 28.1 ±0.2 33.8 ±0.3 36.8 ±0.2 41 ±0.2 48 ±0.3 62.8 ±0.5 42.5 ±0.2 53 ±0.1 4.5 +0.1 0 2.3 0.1 x8.5 +0.3 12 ±0.35 16.4 ±0.5 1.3 ±0.2 0.200 22.4 25.6 3.2 9.6 19.2 22.4 25.6 6.4 12.8 9.6 12.8 28.8 (1) Pin Positions Tolerance 0.4 B C DC+ AC1 AC2 DC- 1 DC- 2 -t° AC1 AC2 T1 T2 DC-2 DC-2 DC+ DC-1 DC-1 16.4 ±0.2 19.4 ±0.2 28.1 ±0.2 33.8 ±0.3 36.8 ±0.2 41 ±0.2 48 ±0.3 62.8 ±0.5 42.5 ±0.2 53 ±0.1 4.5 +0.1 0 2.3 0.1 x8.5 +0.3 12 ±0.35 16.4 ±0.5 1.3 ±0.2 0.200 22.4 25.6 3.2 9.6 19.2 22.4 25.6 6.4 12.8 9.6 12.8 28.8 (1) Pin Positions Tolerance 0.4 B C

CBB021M12FM3, CBB021M12FM3T Rev. 2, April 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Supporting Links & Tools Evaluation Tools & Support

• KIT-CRD-CIL12N-FMB: Dynamic Evaluation Board for Full-Bridge FM3 Modules
• CBB021M12FM3 PLECS Model
• SpeedFit 2.0 Design Simulator™
• Technical Support Forum Dual-Channel Gate Driver Board
• EVAL-ADUM4146WHB1Z: Analog Devices® Gate Driver Board
• Si823H-AxWA-KIT: Skyworks® Gate Driver Board
• ACPL-355JC: Broadcom® Gate Driver Board
• CGD1700HB2M-UNA: Wolfspeed Gate Driver Board
• CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers Application Notes
• CPWR-AN41: Mounting Instructions and PCB Requirements
• CPWR-AN42: Thermal Interface Material Application Note
• CPWR-AN45: Dynamic Performance Application Note Product Ordering Code Part Number Description CBB021M12FM3 Without Pre-Applied Phase Change Thermal Interface Material CBB021M12FM3T With Pre-Applied Phase Change Thermal Interface Material

CBB021M12FM3, CBB021M12FM3T Rev. 2, April 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation for use in the applications identified in the next bullet point, and for the compliance of the buyers’ products, including those that incorporate this product, with all applicable legal, regulatory, and safety-related requirements. This product has not been designed or tested for use in, and is not intended for use in, applications in which failure of the product would reasonably be expected to cause death, personal injury, or property damage, including but not limited to equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment, aircraft navigation, communication, and control systems, aircraft power and propulsion systems, air traffic control systems, and equipment used in the planning, construction, maintenance, or operation of nuclear facilities. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed. com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.