CBB011M12GM4

CBB011M12GM4 WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Rev. 1, June 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. CBB011M12GM4, CBB011M12GM4T Technical Features

• Ultra-Low Loss
• High Frequency Operation
• Zero Turn-Off Tail Current from MOSFET
• Normally-Off, Fail-Safe Device Operation
• Optional Pre-Applied Thermal Interface Material
• Features Gen4 Technology with Soft Body Diode Typical Applications
• EV Chargers
• High-Efficiency Converters / Inverters
• Renewable Energy
• Smart-Grid / Grid-Tied Distributed Generation

1200 V, 11 mΩ, Silicon Carbide, Full-Bridge Module

RDS(on) 11 mΩ System Benefits

• Enables Compact, Lightweight Systems
• Increased System Efficiency, due to Low Switching & Conduction Losses of SiC
• Reduced Thermal Requirements and System Cost Key Parameters Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Voltage VDS 1200 V THS = 25 °C Maximum Gate-Source Voltage VGS(max) -8 +19 Transient Fig. 33 Note 1Operational Gate-Source Voltage VGS(op) -4/15 Static DC Continuous Drain Current (TVJ ≤ 150 °C) ID 100 A VGS = 15 V, THS = 50 °C, TVJ ≤ 150 °C Notes 2,3,4 Fig. 20 DC Continuous Drain Current (TVJ ≤ 175 °C) 100 VGS = 15 V, THS = 50 °C, TVJ ≤ 175 °C Pulsed Drain Current IDM 200 tPmax limited by TVJmax VGS = 15 V, THS = 50 °C Power Dissipation PD 292 W THS = 50 °C, TVJ ≤ 175 °C Note 5 Fig. 20 Virtual Junction Temperature TVJ(op) -40 150 °C Operation -40 175 °C Intermittent with Reduced Life DC+ AC1 AC2 DC- 1 DC- 2 -t° Note (1): Recommended turn-on gate voltage is 15 V with ±5% regulation tolerance Note (2): Current limit at THS = 50°C ,TVJ ≤ 150 °C calculated by ID(max) = √(PD / RDS(typ)(TVJ(max),ID(max) ) Note (3): Current limit at THS = 50°C, TVJ ≤ 175 °C imposed by package Note (4): Verified by design Note (5): PD = (TVJ -THS)/RTH(JH,typ)

CBB011M12GM4, CBB011M12GM4T Rev. 1, June 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1200 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.8 2.5 4.0 VDS = VGS, ID = 28 mA

2.0 VDS = VGS, ID = 28 mA, TVJ = 175 °C

Zero Gate Voltage Drain Current IDSS 3 300 µA VGS = 0 V, VDS = 1200 V Gate-Source Leakage Current IGSS 60 1200 nA VGS = 19 V, VDS = 0 V Drain-Source On-State Resistance (Devices Only) RDS(on) 11.0 14.9 mΩ VGS = 15 V, ID = 100 A Fig. 2 Fig. 317.6 VGS = 15 V, ID = 100 A, TVJ = 150 °C

19.8 VGS = 15 V, ID = 100 A, TVJ = 175 °C

S VDS = 20 V, ID = 100 A Fig. 4

78 VDS = 20 V, ID = 100 A, TVJ = 175 °C

Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOn 1.2 1.1 1.2 mJ VDD = 600 V, ID = 100 A, VGS = -4 V/15 V, RG(off) = 0 Ω, RG(on) = 1 Ω Lσ = 24 nH Fig. 11 Fig. 13Turn-Off Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOff 0.17 0.15 0.12 Internal Gate Resistance RG(int) 1.4 Ω f = 100 kHz Input Capacitance Ciss 10.1 nF VGS = 0 V, VDS = 800 V, VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 0.4 Reverse Transfer Capacitance Crss 36 pF Gate to Source Charge QGS 180 nC VDS = 800 V, VGS = -4 V/15 V, ID = 100 A, Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 96 Total Gate Charge QG 405 FET Thermal Resistance, Junction to Heatsink Rth JH 0.429 °C/W Measured with Pre-Applied TIM Fig. 17 Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Notes Body Diode Forward Voltage VSD 5.8 V VGS = -4 V, ISD = 100 A Fig. 7

5.4 VGS = -4 V, ISD = 100 A, TVJ = 175 °C

DC Source-Drain Current (Body Diode) ISD BD 63 A VGS = -4 V, THS = 50 °C, TVJ ≤ 175 °C Notes 3,4 Fig. 20 Reverse Recovery Time tRR 20.3 ns VGS = -4 V, ISD = 100 A, VR = 600 V di/dt = 16.4 A/ns, TVJ = 175 °C Fig. 32Reverse Recovery Charge QRR 2.25 µC Peak Reverse Recovery Current IRRM 183 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C ERR 0.38 0.48 0.66 mJ VDD = 600 V, ID = 100 A, VGS = -4 V/15 V, RG(on) = 1.0 Ω, Lσ = 24 nH Fig. 14

CBB011M12GM4, CBB011M12GM4T Rev. 1, June 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Package Resistance, M1 (High-Side) RHS 2.98 mΩ THS = 125°C, Note 5 Package Resistance, M2 (Low-Side) RLS 3.18 Stray Inductance LStray 16.8 nH Between DC- and DC+, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 2.0 2.3 N-m M4 bolts Weight W 39 g Case Isolation Voltage Visol 3 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 200 Clearance Distance 5.0 mm Terminal to Terminal

10.0 Terminal to Heatsink

6.3 Terminal to Terminal

11.5 Terminal to Heatsink

Temperature Sensor (NTC) Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Rated Resistance RNTC 5.0 kΩ TNTC = 25°C Resistance Tolerance at 25 °C ΔR/R -5 5 % Beta Value (T2 = 50 °C) ß25/50 3380 K Beta Value (T2 = 80 °C) ß25/80 3468 K Beta Value (T2 = 100 °C) ß25/100 3523 K Power Dissipation PMax 10 mW TNTC = 25°C Note (5): Total Effective Resistance (Per Switch Position) = MOSFET RDS(on) + Switch Position Package Resistance

CBB011M12GM4, CBB011M12GM4T Rev. 1, June 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Schematic and Pin Out Package Dimension (mm) DC+ AC1 AC2 DC- 1 DC- 2 -t° DC+DC-1 G2 S2 S4 G4 DC-2 AC1 G3 S3 AC2 A10 3.2 6.4 9.6 12.8 19.2 22.4 25.6 28.8 35.2 38.4 41.6 44.8 4.35 3.2 28.8 0.30 ISOMETRIC VIEW SCALE: 2:1 DIMENSION TABLE SYMBOL DIMENSION TOLERANCE A1 56.7 ±0.30 A2 62.8 ±0.50 A3 51 ±0.15 A4 53 REF. A5 22.7 ±0.30 A6 48 ±0.30 A7 42.5 ±0.15 A8 16.4 ±0.20 A9 4.5 ±0.10 A10 2.3 8.5 : -0.10 : ±0.30 B1 16.4 ±0.50 B2 12.0 ±0.35 B3 1.4 ±0.20 ALL PIN LOCATIONS ±0.40 PART #: REV THIRD ANGLE PROJECTION mm / deg SIZE C SHEET 1 OF 2 SPECIAL CHARACTERISTICS REQUIRING CPK > 1.67 AND CON- TINUOUS STATISTICAL PROCESS CONTROL (SPC) MONITORING CRITICAL TO QUALITY WOLFSPEED CONFIDENTIAL 2D AND 3D CAD GEOMETRY AVAILABLE UPON REQUEST. DIMENSIONS AND TOLERANCES COMPLY WITH ASME Y14.5-2009. GM4 » CBB011M12GM4 TITLE DATASHEET - CBB011M12GM4 DETAIL VIEWS SIGNIFICANT FEATURE, DIMENSION, OR CHARACTERISTIC WHICH MAY BE REFERRED TO BY THE ITEM NUMBER OR NOTE LETTER SIGNIFICANT FEATURE SHEET SCALE: 3:1 X XThis document and the information contained within are the proprietary and confidential information of Wolfspeed, Inc. This document may not be copied, reproduced, or disclosed to any unauthorized person without prior written consent of Wolfspeed, Inc. 535 W. Research Center Fayetteville, AR 72701 (866) 924-3645 www.wolfspeed.com RELEASE STATUS: RELEASE DATE: 0ADS-020-007 UNDER REVIEW [PRE-PR] NONEA A B B C C D D E E F F

CBB011M12GM4, CBB011M12GM4T Rev. 1, June 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Supporting Links & Tools Evaluation Tools & Support

• All L TSpice Models
• All PLECS Models
• SpeedFit 2.0 Design Simulator™
• Technical Support Forum Dual-Channel Gate Driver Board
• EVAL-ADUM4146WHB1Z: Analog Devices® Gate Driver Board
• Si823H-AxWA-KIT: Skyworks® Gate Driver Board
• ACPL-355JC: Broadcom® Gate Driver Board
• CGD1700HB2M-UNA: Wolfspeed Gate Driver Board
• CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers Application Notes
• CPWR-AN41: Mounting Instructions and PCB Requirements
• CPWR-AN42: Thermal Interface Material Application Note
• CPWR-AN45: Dynamic Performance Application Note Product Ordering Code Part Number Description CBB011M12GM4 Without Pre-Applied Phase Change Thermal Interface Material CBB011M12GM4T With Pre-Applied Phase Change Thermal Interface Material

CBB011M12GM4, CBB011M12GM4T Rev. 1, June 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimers WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAUL TS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety-related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.