CAS300M17BM2 WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

Rev. 3, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power CAS300M17BM2 Technical Features

  • Industry Standard 62mm Footprint
  • Ultra Low Loss, High-Frequency Operation
  • Zero Reverse Recovery from Diodes
  • Zero Turn-off Tail Current from MOSFET
  • Normally-off, Fail-safe Device Operation
  • Copper Baseplate and Aluminum Nitride Insulator

Applications

  • HF Resonant Converters/Inverters
  • Solar and Wind Inverters
  • UPS and SMPS
  • Motor Drive
  • Traction 1700 V, 8.0 mΩ, Silicon Carbide, Half-Bridge Module VDS 1700 V IDS 300 A System Benefits
  • Enables Compact and Lightweight Systems
  • High Efficiency Operation
  • Mitigates Over-voltage Protection
  • Reduced Thermal Requirements
  • Reduced System Cost Maximum Parameters (Verified by Design) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Voltage VDS 1700 VGate-Source Voltage, Maximum Values VGS max -10 +25 Gate-Source Voltage, Recommended Values VGS op -5 +20 DC Continuous Drain Current ID 325 A VGS = 20 V, TC = 25 °C Fig. 26

225 VGS = 20 V, TC = 90 °C

DC Source-Drain Current (Body Diode) ISD BD

556 VGS = -5 V, TC = 25 °C

353 VGS = -5 V, TC = 90 °C

Maximum Pulsed Drain-Source Current ID (pulsed) 900 Pulse width limited by TVJ(max) Maximum Virtual Junction Temperature under Switching Conditions TVJ op -40 150 °C D D C C B B A A Mid

Rev. 3, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1700 V VGS = 0 V, IDS = 2 mA Fig. 29 Gate Threshold Voltage VGS(th) 1.8 2.5 VDS = VGS, IDS = 104 mA Fig. 7 Zero Gate Voltage Drain Current IDSS 0.7 2 mA VGS = 0 V, VDS = 1700 V 1.5 4 VGS = 0 V, VDS = 1700 V, TVJ = 150°C Gate-Source Leakage Current IGSS 1 600 nA VGS = 25 V, VDS = 0 V Drain-Source On-State Resistance (MOSFET Only) RDS(on) 8.0 10.0 mΩ VGS = 20 V, ID = 300 A Fig. 4 Fig. 5 Fig. 616.2 20.0 VGS = 20 V, ID = 300 A, TVJ = 150 °C Transconductance gfs 133 S VDS = 20 V, ID = 300 A Fig. 8

131 VDS = 20 V, ID = 300 A, TVJ = 150 °C

Turn-On Switching Energy EOn 13.0 mJ VDD = 900 V, ID = 300 A, VGS = -5 V/+20 V, RG(ON) = 2.5 Ω, RG(OFF) = 2.5 Ω, L = 77 μH TVJ = 150 °C Note: IEC 60747-8-4 Definitions Fig. 22 Turn-Off Switching Energy EOff 10.0 Internal Gate Resistance RG(int) 3.7 Ω f = 1 MHz, VAC = 25 mV Input Capacitance Ciss 20 nF VDS = 1000 V, VAC = 25 mV f = 200 kHz Fig. 16 Fig. 17Output Capacitance Coss 2.5 Reverse Transfer Capacitance Crss 80 pF Gate to Source Charge QGS 273 nC VDS = 900 V, VGS = -5 V/+20 V, ID = 300 A, Per JEDED24 pg 27 Fig. 15Gate to Drain Charge QGD 324 Total Gate Charge QG 1076 Turn-on Delay Time td(on) 105 ns VDD = 900V, VGS = -5/+20V, ID = 300 A, RG(ext) = 2.5 Ω, Timing relative to VDS Note: IEC 60747-8-4, pg 83 Inductive load Fig. 23 Rise Time tr 72 Turn-off Delay Time td(off) 211 Fall Time tf 56 MOSFET Thermal Resistance, Junction to Case Rth-JCM 0.067 0.071 °C/W Fig. 27

Rev. 3, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Parameter Symbol Min. Typ. Max. Unit Test Conditions Stray Inductance LStray 15 nH Between terminals 2 & 3 Case Temperature TC -40 125 °C Mounting Torque MS 5.0 N-m To heatsink and terminals Weight W 300 g Case Isolation Voltage VIsol 5.0 kV AC, 50 Hz, 1 minute Clearance Distance 9 mm Terminal to terminal Creepage Distance

30 Terminal to terminal

40 Terminal to baseplate

Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Notes Body Diode Forward Voltage VSD 1.7 2.0 V VGS = 0 V, ISD = 300 A Fig. 10 Fig. 112.2 2.5 VGS = 0 V, ISD = 300 A, TVJ = 150 °C Total Capacitive Charge QC 4.4 μC ISD = 300 A, VDS = 900 V, TVJ = 25°C, diSD/dt = 9 kA/μs, VGS = -5 V DIODE Thermal Resistance, Junction to Case Rth-JCD 0.060 0.065 °C/W Fig. 28 Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified)

Rev. 3, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Schematic Package Dimension (mm) CAS300M17BM2 H2306-001

Rev. 3, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Supporting Links & Tools Evaluation Tools & Support

  • KIT-CRD-CIL17N-BM: Dynamic Performance Evaluation Board for the 62 mm Module
  • SpeedFit 2.0 Design Simulator™
  • Technical Support Forum Dual-Channel Gate Driver Board
  • CGD1700HB2P-BM2: Dual Channel Differential Isolated Half Bridge Gate Driver Board
  • CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers Application Notes
  • 62 mm Module Mounting Guide
  • 62 mm Module Thermal Interface Material Guide

Rev. 3, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Cree. No communication from any employee or agent of Cree or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Cree. Notwithstanding any application-specific information, guidance, assistance, or support that Cree may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation for use in the applications identified in the next bullet point, and for the compliance of the buyers’ products, including those that incorporate this product, with all applicable legal, regulatory, and safety-related requirements. This product has not been designed or tested for use in, and is not intended for use in, applications in which failure of the product would reasonably be expected to cause death, personal injury, or property damage, including but not limited to equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment, aircraft navigation, communication, and control systems, aircraft power and propulsion systems, air traffic control systems, and equipment used in the planning, construction, maintenance, or operation of nuclear facilities. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Cree representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.