CAR600M12HN6 WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. CAR600M12HN6 Technical Features

  • Ultra-Low Loss, High Frequency Operation
  • Low Forward Voltage (VF) Drop with Positive Temperature Coefficient
  • Zero Reverse Recovery Current
  • Zero Forward Recovery Voltage
  • Temperature-Independent Switching Behavior

1200 V, 600 A, Silicon Carbide, Half-Bridge Rectifier

Maximum Parameters (Verified by Design) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Maximum Reverse Voltage VR-Max 1200 V Continuous Forward Current IF 908 A TC = 25°C, TVJ ≤ 175°C

642 TC = 90°C, TVJ ≤ 175°C

Maximum Pulsed Forward Current IF (Pulsed) 1200 tPmax limited by TVJmax TC = 25°C Maximum Virtual Junction Temperature TVJ -40 175 °C Mid NTC1 NTC2 -t° -t°

Applications

  • Railway, Traction, and Motor Drives
  • EV Chargers
  • High-Efficiency Converters / Inverters
  • Renewable Energy
  • Smart-Grid / Grid-Tied Distributed Generation System Benefits
  • Enables Compact, Lightweight Systems
  • Increased System Efficiency, due to Low Switching & Conduction Losses of SiC
  • Reduced Thermal Requirements and System Cost

Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Diode Characteristics (Per Position) (TVJ = 25°C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Diode Forward Voltage VF 1.5 V IF = 600 A

2.0 IF = 600 A, TVJ = 175°C

0.16 mA VR = 1200 V, TVJ = 25°C

0.90 VR = 1200 V, TVJ = 175°C

Total Capacitive Charge QC 3.5 mC VR = 800 V Total Capacitance C 45.3 nF VR = 0 V, f = 100 kHz

3.2 VR = 400 V, f = 100 kHz

2.5 VR = 800 V, f = 100 kHz

Thermal Resistance, Junction to Case RTH-JC 0.063 Per position Note: 1 SiC Schottky diodes are majority carrier devices, so there is no reverse recovery charge.

Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Package Resistance, M1 (High-Side) R1-2 106.5 µΩ TC = 125°C, Note 1 Package Resistance, M2 (Low-Side) R2-3 126.3 TC = 125°C, Note 1 Stray Inductance LStray 4.9 nH Between DC- and DC+, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 3 4.5 5 N-m Baseplate, M6 bolts 0.9 1.1 1.3 Power Terminals, M4 bolts Weight W 167 g Case Isolation Voltage Visol 4 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 600 Clearance Distance 13.07 mm Terminal to Terminal

6.00 Terminal to Heatsink

14.27 Terminal to Terminal

12.34 Terminal to Heatsink

NTC Characteristics (TNTC = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Notes Resistance at 25°C R25 4700 Ω Tolerance of R25 ±1 % Beta Value for 25°C to 85°C B25/85 3435 K Beta Value for 0°C to 100°C B0/100 3399 K Tolerance of B25/85 ±1 % Maximum Power Dissipation PMax 50 mW A B C D Steinhart & Hart Coefficients for NTC Resistance & NTC Temperature Computation (T in K) A1 B1 C1 D1 3.354E-03 3.001E-04 5.085E-06 2.188E-07

Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Schematic and Pin Out Package Dimension (mm) -t° PIN OUT SCHEME PIN LABEL 1 V+

2 Mid

4 NTC1

5 NTC2

4× 6.6±0.25 4× 12 A XXXXXX-XXXX 9× M4 POWER TERMINAL CONNECTION POINTS DATE CODE PART NUMBER DM CODE 0.30

3 SURFACES

9× 4.25 MAX BOLT PENETRATION DEPTH DETAIL A SCALE: 4:1 3× R0.8 D6 D6 D6 XXXXXXXXXXXX NOTE: ALL MARKINGS SHALL CONFORM TO PRC-00786. DIMENSION TABLE SYMBOL DIMENSION TOLERANCE A1 110.00 0.60 A2 109.25 0.60 A3 65.00 0.60 A4 64.25 0.60 A5 3.25 0.30 A6 11.45 0.60 B1 93.00 0.30 B2 48.00 0.30 C1 24.00 0.40 C2 1.71 0.40 C3 17.30 0.50 C4 2.54 0.30 C5 0.64 0.30 D1 23.75 0.50 D2 23.13 0.50 D3 24.13 0.50 D4 12.20 0.50 D5 71.00 0.30 D6 10.75 0.30 -t° PIN OUT SCHEME PIN LABEL 1 V+ -t° -t°

Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Supporting Links & Tools Evaluation Tools & Support

  • CAR600M12HN6 PLECS Model
  • SpeedFit 2.0 Design Simulator™
  • Technical Support Forum Application Notes
  • CPWR-AN35: 62mm Thermal Interface Material Application Note
  • CPWR-AN39: KIT-CRD-CIL12N-HM User Guide

Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Cree. No communication from any employee or agent of Cree or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Cree. Notwithstanding any application-specific information, guidance, assistance, or support that Cree may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation for use in the applications identified in the next bullet point, and for the compliance of the buyers’ products, including those that incorporate this product, with all applicable legal, regulatory, and safety-related requirements. This product has not been designed or tested for use in, and is not intended for use in, applications in which failure of the product would reasonably be expected to cause death, personal injury, or property damage, including but not limited to equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment, aircraft navigation, communication, and control systems, aircraft power and propulsion systems, air traffic control systems, and equipment used in the planning, construction, maintenance, or operation of nuclear facilities. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Cree representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.