CAP300DG POWERINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Rev. E 11/21 CAP300DG www.power.com NOTES: A. Saturation current specifications ensure a natural RC discharge characteristic at all voltages up to 265 VAC peak with the external resistor values specified in Table 1. B. Specifications are guaranteed by characterization and design. Absolute Maximum Ratings (4) Notes: 1. Voltage of D1 pin relative to D2 pin in either polarity. 2. The peak DRAIN current is allowed while the DRAIN voltage is simultaneously less than 400 V. 3. 1/16 in. from case for 5 seconds. 4. The Absolute Maximum Ratings specified may be applied one at a time without causing permanent damage to the product. Exposure to Absolute Maximum Rating conditions for extended periods of time may affect product reliability. Parameter Symbol Conditions TA = -20 to 105 °C (Unless Otherwise Specified) Min Typ Max Units Control Functions AC Removal Detection Time tDETECT Line Cycle Frequency 47-63 Hz 22 31.4 ms Drain Saturation CurrentA,B IDSAT CAP300DG 6.3 mA Supply Current ISUPPLY TA = 25 °C 21.7 mA Thermal Resistance Thermal Resistance: D Package(1): Notes: 1. Reference thermal resistance test conditions: JEDEC JESD51-3, SEMI Test Method #G43-87, and MIL-STD-883 Method 10121.1.

Figure 7. I SUPPLY vs. Temperature.

Rev. E 11/21 CAP300DG www.power.com PI-5615-020515D08A SO-8 (D Package) 3.90 (0.154) BSC Notes: 1. JEDEC reference: MS-012. 2. Package outline exclusive of mold flash and metal burr. 3. Package outline inclusive of plating thickness. 4. Datums A and B to be determined at datum plane H. 5. Controlling dimensions are in millimeters. Inch dimensions are shown in parenthesis. Angles in degrees. 0.20 (0.008) C 1 4 2 6.00 (0.236) BSC D 4.90 (0.193) BSC 0.10 (0.004) C D 0.10 (0.004) C 2X A-B 1.27 (0.050) BSC 0.25 (0.010) M C A-B D 0.25 (0.010) 0.10 (0.004) (0.049 - 0.065) 1.25 - 1.65 1.75 (0.069) 1.35 (0.053) 0.10 (0.004) C C H o 1.27 (0.050) 0.40 (0.016) GAUGE PLANE 0 - 8 BSC SEATING PLANE 0.25 (0.010) 0.17 (0.007) DETAIL A DETAIL A C SEATING PLANE Pin 1 ID + + 5.45 (0.215) 1.45 (0.057) Reference Solder Pad Dimensions 4.00 (0.157)

Rev. E 11/21 CAP300DG www.power.com Part Ordering Information

  • CAP300DG
  • Series Number
  • Package Identifier D Plastic SO-8
  • Package Material G GREEN: Halogen Free and RoHS Compliant
  • Tape & Reel and Other Options Blank Standard Configurations TL Tape & Reel, 2.5 k pcs. CAP 300 D G - TL

B Code A release. 08/19 C Updated per Nemko and CB certification. 02/20 D Updated sub-header text, added new bullet point under Product Highlights section and new Figure 2 on page 1. 08/21 E Updated Operating, Maximum and Conditions Temperature range in Abs Max Ratings & Parameter tables on page 4. 11/21 For the latest updates, visit our website: www.power.com Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. Patent Information The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered by one Power Integrations patents may be found at www.power.com. Power Integrations grants its customers a license under certain patent rights as set forth at www.power.com/ip.htm. Life Support Policy POWER INTEGRATIONS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF POWER INTEGRATIONS. As used herein: 1. A Life support device or system is one which, (i) is intended for surgical implant into the body, or (ii) supports or sustains life, and (iii) whose failure to perform, when properly used in accordance with instructions for use, can be reasonably expected to result in significant injury or death to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Power Integrations, the Power Integrations logo, CAPZero, ChiPhy, CHY, DPA-Switch, EcoSmart, E-Shield, eSIP, eSOP, HiperPLC, HiperPFS, HiperTFS, InnoSwitch, Innovation in Power Conversion, InSOP, LinkSwitch, LinkZero, LYTSwitch, SENZero, TinySwitch, TOPSwitch, PI, PI Expert, PowiGaN, SCALE, SCALE-1, SCALE-2, SCALE-3 and SCALE-iDriver, are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. ©2021, Power Integrations, Inc. World Headquarters

5245 Hellyer Avenue

San Jose, CA 95138, USA Main: +1-408-414-9200 Customer Service: Worldwide: +1-65-635-64480 Americas: +1-408-414-9621 e-mail: usasales@power.com China (Shanghai) Rm 2410, Charity Plaza, No. 88 North Caoxi Road Shanghai, PRC 200030 Phone: +86-21-6354-6323 e-mail: chinasales@power.com China (Shenzhen) 17/F, Hivac Building, No. 2, Keji Nan 8th Road, Nanshan District, Shenzhen, China, 518057 Phone: +86-755-8672-8689 e-mail: chinasales@power.com Italy Via Milanese 20, 3rd. Fl.

20099 Sesto San Giovanni (MI) Italy

Phone: +39-024-550-8701 e-mail: eurosales@power.com Japan Yusen Shin-Yokohama 1-chome Bldg. 1-7-9, Shin-Yokohama, Kohoku-ku Yokohama-shi, Kanagawa 222-0033 Japan Phone: +81-45-471-1021 e-mail: japansales@power.com Korea RM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu, Seoul, 135-728, Korea Phone: +82-2-2016-6610 e-mail: koreasales@power.com Singapore

51 Newton Road

#19-01/05 Goldhill Plaza Singapore, 308900 Phone: +65-6358-2160 e-mail: singaporesales@power.com Taiwan 5F, No. 318, Nei Hu Rd., Sec. 1 Nei Hu Dist. Taipei 11493, Taiwan R.O.C. Phone: +886-2-2659-4570 e-mail: taiwansales@power.com UK Building 5, Suite 21 The Westbrook Centre Milton Road Cambridge CB4 1YG Phone: +44 (0) 7823-557484 e-mail: eurosales@power.com Power Integrations Worldwide Sales Support Locations Germany (AC-DC/LED Sales) Einsteinring 24

85609 Dornach/Aschheim

Tel: +49-89-5527-39100 e-mail: eurosales@power.com Germany (Gate Driver Sales) HellwegForum 3

59469 Ense

Tel: +49-2938-64-39990 e-mail: igbt-driver.sales@power.com India #1, 14th Main Road Vasanthanagar Bangalore-560052 India Phone: +91-80-4113-8020 e-mail: indiasales@power.com