CAB600M33LM3 WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed lo go is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. CAB600M33LM3 3300 V, 2.7 mΩ, Silicon Carbide, Half-Bridge Module Technical Features

  • High Power Density Footprint
  • High Junction Temperature (175 °C) Operation
  • Low Stray Inductance (9.5 nH)
  • AlSiC Baseplate
  • High Thermal Conductivity Silicon Nitride Substrate
  • Increased Thermal-Mechanical Performance
  • 3300 V Drain-Source Voltage Key Parameters Parameter Symbol Min. Typ. Max. Unit Conditions Notes Drain-Source Voltage VDS 3300 V TC = 25 °C Maximum Gate-Source Voltage VGS max -10 +20 Transient Note 1 Fig. 33 Operational Gate-Source Voltage VGS op -5/+15 Static DC Continuous Drain Current (TVJ ≤ 175 °C) ID 770 A VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C Notes 2, 3, 4 Fig. 20

580 VGS = 15 V, TC = 90 °C, TVJ ≤ 175 °C

Pulsed Drain Current IDM 1540 tpmax limited by TVJ max VGS = 15 V, TC = 25 °C Power Dissipation PD 4050 W TC = 25 °C, TVJ ≤ 175 °C Note 5 Fig. 21 Operating Virtual Junction Temperature TVJ op -55 175 °C Note (1): Recommended turn-on gate voltage is 15 V with ±5% regulation tolerance Note (2): Current limit TC = 25 °C imposed by package Note (3): Current limit TC = 90 °C calculated by ID(max)=√(PD/RDS(typ)(TVJ(max), ID(max))) Note (4): Verified by design Note (5): PD = (TVJ – TC)/RTH(JC, Typ) VDS 3300 V IDS 600 A System Benefits Typical Applications

  • Reduced Volume, Weight Overall System Level Cost
  • Higher Reliability
  • Higher System Efficiency
  • Reduced Cooling Requirements
  • Improved Thermal Cycling and Longer Lifetime
  • Heavy-Duty E-Mobility: Transportation and Mining
  • Ultra-Fast DC Chargers
  • Industrial Motor Drives
  • Industrial Uninterruptable Power Supply (UPS) Systems
  • Marine and Aerospace Propulsion
  • Terrestrial Power Distribution Systems
  • HVDC and FACTS Controllers

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed lo go is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Conditions Notes Body Diode Forward Voltage VSD

6.0 V VGS = -5 V, ISD = 600 A

Fig. 7

5.3 V VGS = -5 V, ISD = 600 A, TVJ = 175 C

Reverse Recovery Time tRR 238 ns VGS = -5 V, ISD = 600 A, VR = 1800 V; dif/dt = 6.5 A/ns, RG(ON) = 2.5 Ω, TVJ = 175 °C, Reverse Recovery Charge QRR 38 µC Peak Reverse Recovery Current IRRM 255 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C ERR 1.0 24.4 53.1 mJ VDD = 1800 V, ID = 600 A, VGS = -5 V/15 V, RG-ON(ext) = 2.5 Ω, Lσ = 7 nH Fig. 14 Parameter Symbol Min. Typ. Max. Unit Conditions Notes Drain-Source Breakdown Voltage V(BR)DSS 3300 V VGS = 0 V, TVJ = -55 °C Gate Threshold Voltage VGS(th) 2.6 3.5 4.5 VDS = VGS, IDS = 530 mA

2.6 VDS = VGS, IDS = 530 mA, TVJ = 175 C

Zero Gate Voltage Drain Current IDSS 100 600 μA VGS = 0 V, VDS = 3300 V Gate-Source Leakage Current IGSS 200 5000 nA VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (MOSFET only) RDS(on) 2.7 3.4 mΩ VGS = 15 V, IDS = 600 A Fig. 2 Fig. 3 6.8 VGS = 15 V, IDS = 600 A, TVJ = 175 C Transconductance gfs 448 S VDS = 20 V, IDS = 600 A Fig. 4

536 VDS = 20 V, IDS = 600 A, TVJ = 175 C

Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOn 170 167 193 mJ VDD = 1800 V, ID = 600 A, VGS = -5 V/15 V, RG-ON(ext) = 2.5 Ω, RG-OFF(ext) = 1 Ω, Lσ = 7 nH Fig. 11 Fig. 13 Turn-Off Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOff Internal Gate Resistance RG(int) 0.5 Ω f = 100 kHz, VAC = 25 mV Input Capacitance Ciss 146 nF VGS = 0 V, VDS = 3000 V, VAC = 25 mV, f = 100 kHz Fig. 9 Output Capacitance Coss 1.8 Reverse Transfer Capacitance Crss 53 pF Gate to Source Charge QGS 2620 nC VDS = 2000 V, VGS = -5 V/+15 V ID = 1000 A Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 375 Total Gate Charge QG 5120 FET Thermal Resistance, Junction to Case Rth JC 0.037 °C/W Fig. 17

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed lo go is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Temperature Sensor (NTC) Characteristics Parameter Symbol Min. Typ. Max. Unit Conditions Resistance at 25 °C R25 4700 Ω TNTC = 25 °C Tolerance of R25 ±1 % Beta Value for 25 °C to 85 °C B25/85 3435 K Beta Value for 0 °C to 100 °C B0/100 3399 K Tolerance of B25/85 ±1 % Maximum Power Dissipation P25 50 mW Steinhart & Hart Coefficients for NTC Resistance & NTC Characteristics Computation (T in K) A B C D A1 B1 C1 D1 Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Conditions Package Resistance, M1 (High-Side) R1-3 0.28 mΩ TC = 125 °C, Note 6 & 7 Package Resistance, M2 (Low-Side) R3-6 0.55 TC = 125 °C, Note 6 & 7 Stray Inductance LStray 9.5 nH Between Terminals 1 & 6, f = 10 MHz Case Temperature TC -55 150 °C Storage Temperature Tstg -55 150 °C Mounting Torque M 3.5 4.5 5.5 N-m Baseplate, M6 bolts 12 14 16 Power Terminals, M8 bolts 0.5 0.7 1.3 Auxiliary Terminals, M3 bolts Weight W 745 g Case Isolation Voltage 6.0 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 600 Clearance Distance mm Terminal to Terminal

33 Terminal to Baseplate

23 Terminal to Terminal

45 Terminal to Baseplate

Note (6): Total Effective Resistance (Per Switch Position) = MOSFET RDS(ON) + Switch Position Package Resistance Note (7): Numbers reference the connections from the Schematics and Pin Out section of this document

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed lo go is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Schematic and Pinout Package Dimensions (mm)

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed lo go is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Supporting Links & Tools Evaluation Tools & Support

  • LTspice and PLECS Models
  • KIT-CRD-CIL33N-LM: Dynamic Performance Evaluation for the LM3 Module
  • SpeedFit 2.0 Design SimulatorTM
  • Technical Support Forum Dual-Channel Gate Driver Board
  • CGD3300HB6P-LM3: Dual Channel Differential Isolated Half-Bridge Gate Driver Board Application Notes
  • LM Module Signal Pinout Clarification Guide
  • LM Module Platform Mounting Guide
  • LM3 Thermal Interface Material Application User Guide

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed lo go is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Notes & Disclaimers WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD-PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application -specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety -related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspe ed representative to ensure you get the most up -to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power