CAB500M17HM3 WOLFSPEED | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. CAB500M17HM3 Technical Features
- Ultra-Low Loss
- High Frequency Operation
- Zero Turn-Off Tail Current from MOSFET
- Normally-Off, Fail-Safe Device Operation
Applications
- Railway, Traction, and Motor Drives
- EV Chargers
- High-Efficiency Converters / Inverters
- Renewable Energy
- Smart-Grid / Grid-Tied Distributed Generation
1700 V, 500 A, Silicon Carbide, Half-Bridge Module
- Enables Compact, Lightweight Systems
- Increased System Efficiency, due to Low Switching & Conduction Losses of SiC
- Reduced Thermal Requirements and System Cost Maximum Parameters (Verified by Design) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Voltage VDS 1700 VGate-Source Voltage, Maximum Value VGS max -8 +19 Transient, <100 ns Fig. 33 Gate-Source Voltage, Recommended VGS op -4 +15 Static DC Continuous Drain Current ID 653 A VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C Fig. 20
494 VGS = 15 V, TC = 90 °C, TVJ ≤ 175 °C
DC Source-Drain Current (Body Diode) ISD BD
446 VGS = - 4 V, TC = 25 °C, TVJ ≤ 175 °C
284 VGS = - 4 V, TC = 90 °C, TVJ ≤ 175 °C
Pulsed Drain Current ID (pulsed) 1000 tPmax limited by TVJmax VGS = 15 V, TC = 25 °C Virtual Junction Temperature TVJ op -40 175 °C Operation Mid NTC1 NTC2 K2 -t° -t°
Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1700 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.8 2.5 3.6 VDS = VGS, ID = 203 mA
2.0 VDS = VGS, ID = 203 mA, TVJ = 175 °C
Zero Gate Voltage Drain Current IDSS 8 325 μA VGS = 0 V, VDS = 1700 V Gate-Source Leakage Current IGSS 0.008 2 VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (Devices Only) RDS(on) 2.16 2.60 mΩ VGS = 15 V, ID = 500 A Fig. 2 Fig. 34.97 VGS = 15 V, ID = 500 A, TVJ = 175 °C Transconductance gfs 369 S VDS = 20 V, ID = 500 A Fig. 4
374 VDS = 20 V, ID = 500 A, TVJ = 175 °C
Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOn 25.0 27.9 32.5 mJ VDD = 900 V ID = 500 A, VGS = -4 V/15 V, RG(OFF) = 1.5 Ω, RG(ON) = 1.5 Ω, L = 14 μH Fig. 11 Fig. 13Turn-Off Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOff 15.4 15.4 15.6 Internal Gate Resistance RG(int) 0.93 Ω f = 1 MHz, VAC = 25 mV Input Capacitance Ciss 64.9 nF VGS = 0 V, VDS = 1200 V VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 1.5 Reverse Transfer Capacitance Crss 42 pF Gate to Source Charge QGS 640 nC VDS = 1200 V, VGS = -4 V/15 V ID = 735 A Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 560 Total Gate Charge QG 1992 FET Thermal Resistance, Junction to Case Rth JC 0.070 °C/W Fig. 17 Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Notes Body Diode Forward Voltage VSD 5.5 V VGS = -4 V, ISD = 500 A Fig. 7
4.8 VGS = -4 V, ISD = 500 A, TVJ = 175 °C
Reverse Recovery Time tRR 67 ns VGS = -4 V, ISD = 500 A, VR = 900 V di/dt = 13 A/ns, TVJ = 175 °C Fig. 32Reverse Recovery Charge QRR 24 μC Peak Reverse Recovery Current IRRM 350 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C ERR 0.6 3.3 6.3 mJ VDD = 900 V, ID = 500 A, VGS = -4 V/15 V, RG(ON) = 1.5 Ω, L = 14 μH Fig. 14
Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Package Resistance, M1 (High-Side) R1-2 106.5 µΩ TC = 125°C, Note 1 Package Resistance, M2 (Low-Side) R2-3 126.3 TC = 125°C, Note 1 Stray Inductance LStray 4.9 nH Between DC- and DC+, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 3 4.5 5 N-m Baseplate, M6 bolts 0.9 1.1 1.3 Power Terminals, M4 bolts Weight W 167 g Case Isolation Voltage Visol 4 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 600 Clearance Distance 13.07 mm Terminal to Terminal
6.00 Terminal to Heatsink
14.27 Terminal to Terminal
12.34 Terminal to Heatsink
Note: 1 Total Effective Resistance (Per Switch Position) = MOSFET RDS(on) + Switch Position Package Resistance NTC Characteristics (TNTC = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Notes Resistance at 25°C R25 4700 Ω Tolerance of R25 ±1 % Beta Value for 25°C to 85°C B25/85 3435 K Beta Value for 0°C to 100°C B0/100 3399 K Tolerance of B25/85 ±1 % Maximum Power Dissipation PMax 50 mW A B C D Steinhart & Hart Coefficients for NTC Resistance & NTC Temperature Computation (T in K) A1 B1 C1 D1 3.354E-03 3.001E-04 5.085E-06 2.188E-07
Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Schematic and Pin Out Package Dimension (mm) PIN OUT SCHEME PIN LABEL 1 V+
2 Mid
4 G1, Top row pins (2)
5 K1, Bottom row pins (2)
6 G2, Top row pins (2)
7 K2, Bottom row pins (2)
8 NTC1
9 NTC2
4× 6.6±0.25 4× 12 A XXXXXX-XXXX 9× M4 POWER TERMINAL CONNECTION POINTS DATE CODE PART NUMBER DM CODE 0.30
3 SURFACES
9× 4.25 MAX BOLT PENETRATION DEPTH C8 C10 C10 C8 C8 C9 DETAIL A SCALE: 4:1 3× R0.8 D6 D6 D6 XXXXXXXXXXXX NOTE: ALL MARKINGS SHALL CONFORM TO PRC-00786. DIMENSION TABLE SYMBOL DIMENSION TOLERANCE A1 110.00 0.60 A2 109.25 0.60 A3 65.00 0.60 A4 64.25 0.60 A5 3.25 0.30 A6 11.45 0.60 B1 93.00 0.30 B2 48.00 0.30 C1 11.30 0.40 C2 13.84 0.40 C3 24.00 0.40 C4 34.16 0.40 C5 36.70 0.40 C6 1.71 0.40 C7 17.30 0.50 C8 2.54 0.30 C9 0.64 0.30 C10 10.16 0.40 D1 23.75 0.50 D2 23.13 0.50 D3 24.13 0.50 D4 12.20 0.50 D5 71.00 0.30 D6 10.75 0.30 Mid NTC1 NTC2 K2 -t° -t°
Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Supporting Links & Tools Evaluation Tools & Support
- CAB500M17HM3 PLECS Model
- SpeedFit 2.0 Design Simulator™
- Technical Support Forum
- Dynamic Characterization Evaluation Tool for the High Performance 62mm (HM) Module Platform Dual-Channel Gate Driver Board
- CGD1700HB3P-HM3: Wolfspeed Gate Driver Board
- CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers Application Notes
- CPWR-AN35: 62mm Thermal Interface Material Application Note
- CPWR-AN39: KIT-CRD-CIL12N-HM User Guide
- PRD-04814: Design Options for Wolfspeed® Silicon Carbide MOSFET Gate Bias Power Supplies
Rev. 01, FEBRUARY 2022 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Contact info:
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Cree. No communication from any employee or agent of Cree or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Cree. Notwithstanding any application-specific information, guidance, assistance, or support that Cree may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation for use in the applications identified in the next bullet point, and for the compliance of the buyers’ products, including those that incorporate this product, with all applicable legal, regulatory, and safety-related requirements. This product has not been designed or tested for use in, and is not intended for use in, applications in which failure of the product would reasonably be expected to cause death, personal injury, or property damage, including but not limited to equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment, aircraft navigation, communication, and control systems, aircraft power and propulsion systems, air traffic control systems, and equipment used in the planning, construction, maintenance, or operation of nuclear facilities. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Cree representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.