CAB3R5M12DM4 WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Rev. 1, DECEMBER 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. CAB3R5M12DM4 Technica Features

  • Ultra-Low Loss
  • High Frequency Operation
  • Light Weight AlSiC Baseplate
  • Zero Turn-Off Tail Current from MOSFET
  • Normally-Off, Fail-Safe Device Operation Typical Applications
  • e-Mobility and Motor Drives
  • EV Chargers
  • High-Efficiency Converters / Inverters
  • Renewable Energy 1200 V, 3.5 mΩ, Silicon Carbide, Half-Bridge Module VDS 1200 V IDS 300 A System Benefits
  • Enables Compact, Lightweight Systems
  • Increased System Efficiency, due to Low Switching & Conduction Losses of SiC
  • Reduced Thermal Requirements and System Cost Key Parameters Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Voltage VDS 1200 VGate-Source Voltage, Maximum Value VGS (max) -8 +19 Transient Fig. 32 Note 1Gate-Source Voltage, Recommended V GS (op) -4/+15 Static DC Continuous Drain Current (TVJ < 175 °C) ID 383 A VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C Notes 2, 3, 5 Fig. 20 293 V GS = 15 V, TC = 90 °C, TVJ ≤ 175 °C Pulsed Drain Current IDM 766 tPmax limited by TVJmax VGS = 15 V, TC = 25 °C Power Dissipation PD 980 W TC = 25 °C, TVJ ≤ 175 °C Fig. 21 Note 4 Operational Virtual Junction Temperature T VJ(op) -40 175 °C Note (1): Recommended turn-on gate voltage is 15 V with ±5% regulation tolerance Note (2): Current limit calculated by ID(max) = √(PD / RDS(typ)(TVJ(max),ID(max))) Note (3): Verified by design Note (4): PD = (TVJ – TC) / RTH(JC,typ) Note (5): Please refer to Application Note, PRD-07635, for guidance on PCB ampacity D D C C B B A A Mid

Rev. 1, DECEMBER 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1200 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.8 2.7 3.6 VDS = VGS, ID = 81 mA

2.2 VDS = VGS, ID = 81 mA, TVJ = 175 °C

Zero Gate Voltage Drain Current IDSS 4 200 μA VGS = 0 V, VDS = 1200 V Gate-Source Leakage Current IGSS 40 1000 nA VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (Devices Only) RDS(on) 3.5 4.6 mΩ VGS = 15 V, ID = 311 A Fig. 2 Fig. 36.5 V GS = 15 V, ID = 311 A, TVJ = 175 °C Transconductance gfs 278 S VDS = 20 V, ID = 311 A Fig. 4

273 VDS = 20 V, ID = 311 A, TVJ = 175 °C

Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOn 3.7 3.7 3.8 mJ VDD = 600 V, ID = 300 A, VGS = -4 V/15 V, RG(EXT) = 0 Ω Lσ = 17.4 nH Fig. 11 Fig. 13Turn-Off Switching Energy, T VJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOff 3.0 3.2 3.3 Internal Gate Resistance R G(int) 1.6 Ω f = 100 kHz Input Capacitance Ciss 29 nF VGS = 0 V, VDS = 800 V, VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 0.9 Reverse Transfer Capacitance Crss 73 pF Gate to Source Charge QGS 268 nC VDS = 800 V, VGS = -4 V/15 V, ID = 311 A, Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 312 Total Gate Charge QG 1044 FET Thermal Resistance, Junction to Case Rth JC 0.153 °C/W Fig. 17

Rev. 1, DECEMBER 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Package Resistance, M1 (High-Side) R3-1 0.41 mΩ TC = 125°C, Note 6 Package Resistance, M2 (Low-Side) R1-2 0.56 TC = 125°C, Note 6 Stray Inductance LStray 10.9 nH Between DC- and DC+, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 1.1 2.3 N-m Baseplate, M4 bolts Weight W 41 g Case Isolation Voltage Visol 4 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 600 Clearance Distance 4.2 mm Terminal to Terminal

13.4 Terminal to Heatsink

8.8 Terminal to Terminal

15.5 Terminal to Heatsink

Note (6): Total Effective Resistance (Per Switch Position) = MOSFET RDS(on) + Switch Position Package Resistance Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Notes Body Diode Forward Voltage VSD 6.2 V VGS = -4 V, ISD = 311 A Fig. 7

5.7 VGS = -4 V, ISD = 311 A, TVJ = 175 °C

DC Source-Drain Current (Body Diode) IBD 192 A VGS = -4 V, TC = 25 ˚C, TVJ ≤ 175 ˚C

131 VGS = -4 V, TC = 90 ˚C, TVJ ≤ 175 ˚C

Reverse Recovery Time tRR 38.3 ns VGS = -4 V, ISD = 300 A, VR = 600 V di/dt = 19.3 A/ns, TVJ = 175 °C Fig. 31Reverse Recovery Charge QRR 6.2 μC Peak Reverse Recovery Current IRRM 269 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C ERR 1.1 1.6 2.6 mJ VDD = 600 V, ID = 300 A, VGS = -4 V/15 V, RG(ON) = 0 Ω, Lσ = 17.4 nH Fig. 14

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 1. Output Characteristics for Various Junction Figure 2. Normalized On-State Resistance vs. Drain Current for Figure 3. Normalized On-State Resistance vs. Junction Figure 4. Transfer Characteristic for Various Junction Figure 5. 3rd Quadrant Characteristic vs. Junction Figure 6. 3rd Quadrant Characteristic vs. Junction

15 V 25 °C

Rev. 1, DECEMBER 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Schematic and Pin Out Package Dimensions (mm) A8 A9 31.5 31.5 13.5 4.09 A A B A10 7.85 A11 A12 C 32 B2 ISOMETRIC VIEW SCALE: 3:2 A14 A13 B7 3 TYP DETAIL A SCALE: 6 : 1 UNLESS OTHERWISE SPECIFIED: ALL SURFACES: 0.125 A B C• ALL HOLES: 0.25 A B C• CAD MODEL IS MASTER. ALL UN-DIMENSIONED • FEATURES TO BE DEFINED BY 3D MODEL GEOMETRY. SYMBOL DIMENSION TOLERANCE A1 3.3 ±0.65 A2 7.75 ±0.50 A3 45 ±0.30 A4 49 ±0.50 A5 51.6 ±0.50 A6 20.4 ±0.65 A7 40.8 ±0.20 B1 36.4 ±0.50 B2 4.4 ±0.50 A8 4.3 ±0.20 A9 12.17 ±0.50 A10 2.5 ±0.30 A11 11.89 +1 -0.65 A12 14.64 ±0.55 B3 14.99 ±0.50 B4 19.79 ±0.50 A13 5× 4 ±0.50 B5 5× 1 ±0.25 A14 3× 13 ±0.50 B6 3× 10 ±0.50 B7 16× 1 ±0.25 ALL CONNECTORS: ±0.75 PART #: REV THIRD ANGLE PROJECTION mm / deg SIZE C SHEET 1 OF 3 SPECIAL CHARACTERISTICS REQUIRING CPK > 1.67 AND CON- TINUOUS STATISTICAL PROCESS CONTROL (SPC) MONITORING CRITICAL TO QUALITY WOLFSPEED CONFIDENTIAL 2D AND 3D CAD GEOMETRY AVAILABLE UPON REQUEST. DIMENSIONS AND TOLERANCES COMPLY WITH ASME Y14.5-2009. DM » CAB003M09DM3 TITLE DM3 POWER MODULE DATASHEET DETAIL VIEWS SIGNIFICANT FEATURE, DIMENSION, OR CHARACTERISTIC WHICH MAY BE REFERRED TO BY THE ITEM NUMBER OR NOTE LETTER SIGNIFICANT FEATURE SHEET SCALE: 3:1 X X A A B B C C D D E E F F This document and the information contained within are the proprietary and confidential information of Wolfspeed, Inc. This document may not be copied, reproduced, or disclosed to any unauthorized person without prior written consent of Wolfspeed, Inc. 535 W. Research Center Fayetteville, AR 72701 (866) 924-3645 www.wolfspeed.com RELEASE STATUS: RELEASE DATE: 0ADS-005-001 PRODUCTION 12/04/2023 3 2 4 5 6 7 1 PIN OUT SCHEME PIN LABEL 1 V+

2 Mid

4 G1, Top row pins (2)

5 K1, Bottom row pins (2)

6 G2, Top row pins (2)

7 K2, Bottom row pins (2)

PART #: REV THIRD ANGLE PROJECTION mm / deg SIZE C SHEET 2 OF 3 SPECIAL CHARACTERISTICS REQUIRING CPK > 1.67 AND CON- TINUOUS STATISTICAL PROCESS CONTROL (SPC) MONITORING CRITICAL TO QUALITY WOLFSPEED CONFIDENTIAL 2D AND 3D CAD GEOMETRY AVAILABLE UPON REQUEST. DIMENSIONS AND TOLERANCES COMPLY WITH ASME Y14.5-2009. DM » CAB003M09DM3 TITLE DM3 POWER MODULE DATASHEET PIN OUT SIGNIFICANT FEATURE, DIMENSION, OR CHARACTERISTIC WHICH MAY BE REFERRED TO BY THE ITEM NUMBER OR NOTE LETTER SIGNIFICANT FEATURE SHEET SCALE: 3:1 X X A A B B C C D D E E F F This document and the information contained within are the proprietary and confidential information of Wolfspeed, Inc. This document may not be copied, reproduced, or disclosed to any unauthorized person without prior written consent of Wolfspeed, Inc. 535 W. Research Center Fayetteville, AR 72701 (866) 924-3645 www.wolfspeed.com RELEASE STATUS: RELEASE DATE: 0ADS-005-001 PRODUCTION 12/04/2023 D D C C B B A A Mid

Rev. 1, DECEMBER 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Supporting Links & Tools Evaluation Tools & Support

  • SpeedFit 2.0 Design SimulatorTM
  • Technical Support Forum
  • L Tspice and PLECS Models Dual-Channel Gate Driver Board
  • CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers
  • CGD1700HB2M-UNA: Wolfspeed Gate Driver Board Application Notes and User Guides
  • PRD-07634: Wolfspeed DM Module Mounting User Guide
  • PRD-07635: Impact of PCB Design on Wolfspeed DM Module Ampacity
  • PRD-07933: Wolfspeed Power Module Thermal Interface Material Application User Guide
  • PRD-08333: Wolfspeed Module CIL Evaluation Kits User Guide
  • PRD-08376: Thermal Characterization Methods and Applications
  • PRD-06379: Environmental Considerations for Power Electronics Systems
  • PRD-07845: Power Module Baseplate Capacitance and Electromagnetic Compatibility
  • PRD-08710: Measuring Stray Inductance in Power Electronics Systems

Rev. 1, DECEMBER 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimers WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAUL TS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety-related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.