CAB320M17XM3 WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Rev. 2, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power CAB320M17XM3 Technical Features

  • High Power Density Footprint
  • High Junction Temperature (175 °C) Operation
  • Low-Inductance (6.7 nH) Design
  • Implements Wolfspeed’s Third Generation SiC MOSFET Technology
  • Silicon Nitride Insulator and Copper Baseplate
  • 1700 V Drain-Source Voltage
  • Cross-pin Gate-Source Signal Pinout

Applications

  • Energy
  • Medical
  • Motor & Motion Control
  • Test and Production Equipment
  • Transportation
  • Traction Inverters 1700 V, 3.5 mΩ, Silicon Carbide, Half-Bridge Module VDS 1700 V IDS 320 A System Benefits
  • Terminal layout allows for direct bus bar connection without bends or bushings enabling a simple, low-inductance design.
  • Isolated, integrated temperature sensing enables high-level tem- perature protection.
  • Dedicated high-side Kelvin-drain pin enables direct voltage sensing for gate driver overcurrent protection.
  • 1700 VDS allows use with higher bus voltage (typically up to 1.4 kV). Maximum Parameters (Verified by Design) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Voltage VDS 1700 VGate-Source Voltage, Maximum Value VGS max -8 +19 Transient, < 100Hz Fig. 33Gate-Source Voltage, Recommended Operating Value VGS op -4 +15 Static DC Continuous Drain Current ID 438 A VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C Fig. 20

333 VGS = 15 V, TC = 90 °C, TVJ ≤ 175 °C

DC Source-Drain Current (Body Diode) ISD BD 312 VGS = -4 V, TC = 25 °C, TVJ ≤ 175 °C Maximum Pulsed Drain-Source Current ID (pulsed) 640 tPmax limited by TVJ op VGS = 15 V, TC = 25 °C Maximum Virtual Junction Temperature under Switching Conditions TVJ op -40 175 °C D D C C B B A A 8,9 Mid NTC1 NTC2 -t° -t°

Rev. 2, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power MOSFET Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1700 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.8 2.5 3.6 VDS = VGS, IDS = 127 mA

2.0 VDS = VGS, IDS = 127 mA, TVJ = 175°C

Zero Gate Voltage Drain Current IDSS 5 200 μA VGS = 0 V, VDS = 1700 V Gate-Source Leakage Current IGSS 5 1250 nA VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (MOSFET Only) RDS(on) 3.5 4.6 mΩ VGS = 15 V, ID = 320 A Fig. 2 Fig. 38.0 VGS = 15 V, ID = 320 A, TVJ = 175 °C Transconductance gfs 256 S VDS = 20 V, ID = 320 A Fig. 4

250 VDS = 20 V, ID = 320 A, TVJ = 175 °C

Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOn 28.4 27.8 30.5 mJ VDD = 900 V, ID = 320 A, VGS = -4 V/15 V, RG(ON) = 6.8 Ω, RG(OFF) = 0 Ω, L = 13.4 μH Fig. 11 Fig. 13Turn-Off Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C EOff 6.9 6.9 6.3 Internal Gate Resistance RG(int) 1.0 1.5 1.9 Ω f = 100 kHz, VAC = 25 mV Input Capacitance Ciss 37.6 nF VGS = 0 V, VDS = 1000 V, VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 1.0 Reverse Transfer Capacitance Crss 46 pF Gate to Source Charge QGS 400 nC VDS = 1200 V, VGS = -4 V/15 V, ID = 461 A, Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 350 Total Gate Charge QG 1245 FET Thermal Resistance, Junction to Case Rth JC 0.097 °C/W Fig. 17 Diode Characteristics (Per Position) (TVJ = 25 °C unless otherwise specified) Parameter Symbol Min. Typ. Max. Unit Test Conditions Notes Body Diode Forward Voltage VSD 5.5 V VGS = -4 V, ISD = 320 A Fig. 7

4.7 VGS = -4 V, ISD = 320 A, TVJ = 175 °C

Reverse Recovery Time tRR 95 ns VGS = -4 V, ISD = 320 A, VR = 900 V, di/dt = 5 A/ns, TVJ = 175 °CReverse Recovery Charge QRR 9.5 μC Peak Reverse Recovery Current IRRM 158 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 175 °C ERR 0.3 2.0 3.7 mJ VDD = 900 V, ID = 320 A, VGS = -4 V/15 V, RG(ON) = 6.8 Ω, L = 13.4 μH Fig. 14

Rev. 2, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Package Resistance, M1 (High-Side) R3-1 0.72 mΩ TC = 125 °C, Note 1 & 2 Package Resistance, M2 (Low-Side) R1-2 0.63 TC = 125 °C, Note 1 & 2 Stray Inductance LStray 6.7 nH Between terminals 2 & 3, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 2.0 3.0 4.0 N-m Baseplate, M4 bolts 2.0 4.0 5.0 Power Terminals, M5 bolts Weight W 175 g Case Isolation Voltage VIsol 4.0 kV AC, 50 Hz, 1 minute Comparative Tracking Index CTI 600 Clearance Distance 12.5 mm From 2 to 3, Note12

11.5 From 1 to Baseplate, Note 2

5.7 From 2 to 5, Note 2

13.7 From 5 to Baseplate, Note 2

14.7 From 2 to 3, Note 2

14.0 From 1 to Baseplate, Note 2

14.7 From 2 to 5, Note 2

14.3 From 5 to Baseplate, Note 2

Note: 1 Total Effective Resistance (Per Switch Position) = MOSFET RDS(ON) + Switch Position Package Resistance

2 Numbers reference the connections from the Schematics and Pin Out section of this document

Temperature Sensor (NTC) Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Resistance at 25°C R25 4700 Ω TNTC = 25 °C Tolerance of R25 ±1 % Beta Value for 25 °C to 85 °C B25/85 3435 K Beta Value for 0 °C to 100 °C B0/100 3399 K Tolerance of B25/85 ±1 % Maximum Power Dissipation P25 50 mW Steinhart & Hart Coefficients for NTC Resistance & NTC Temperature Computation (T in K) A B C D A1 B1 C1 D1 3.354E-03 3.001E-04 5.085E-06 2.188E-07

Rev. 2, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Schematic and Pinout Package Dimension (mm) 4.50 ±0.25 X4 D2D2 E1E1 C2 C2 M5x0.8mm HEX NUT x 3 MAXIMUM BOLT PENETRATION DEPTH: 5.50mm PART NUMBER DM CODE SERIAL NUMBER 0.6 0.6 0.6 XXXXXXXXXXXX XXXXXXXXXX DIMENSION TABLE SYMBOL DIMENSION (mm) TOLERANCE (mm) A1 80.00 0.30 A2 53.00 0.30 A3 3.00 0.30 B1 71.75 0.30 B2 44.75 0.30 C1 12.00 0.50 C2 24.00 0.50 C3 15.75 0.40 D1 (5.50) REF. D2 (31.00) REF. D3 29.50 0.30 D4 (12.50) TYP REF. D5 12.50 0.30 D6 1.50 0.30 E1 (13.50) REF. E2 44.00 0.30 E3 2.54 0.50 E4 (0.64) REF. E5 18.26 0.30 E6 (17.00) REF. 4-1 5-1 7-1 6-1 X-PIN NUMBER DESIGNATION 4-2 5-2 7-2 6-2 PIN DESCRIPTION

1 Mid

8 V+ (Overcurrent)

9 V+ (Overcurrent)

10 NTC2

11 NTC1

PART #: REV THIRD ANGLE PROJECTION mm / deg SIZE C SHEET 3 OF 4 SPECIAL CHARACTERISTICS REQUIRING CPK > 1.67 AND CON- TINUOUS STATISTICAL PROCESS CONTROL (SPC) MONITORING CRITICAL TO QUALITY WOLFSPEED CONFIDENTIAL 2D AND 3D CAD GEOMETRY AVAILABLE UPON REQUEST. DIMENSIONS AND TOLERANCES COMPLY WITH ASME Y14.5-2009. XM3 » Common TITLE POWER MODULE ASSEMBLY X-PIN CONFIGURATION SIGNIFICANT FEATURE, DIMENSION, OR CHARACTERISTIC WHICH MAY BE REFERRED TO BY THE ITEM NUMBER OR NOTE LETTER SIGNIFICANT FEATURE SHEET SCALE: 2:1 X X A A B B C C D D E E F F This document and the information contained within are the proprietary and confidential information of Wolfspeed, Inc. This document may not be copied, reproduced, or disclosed to any unauthorized person without prior written consent of Wolfspeed, Inc. 535 W. Research Center Fayetteville, AR 72701 (866) 924-3645 www.wolfspeed.com RELEASE STATUS: RELEASE DATE: 8APM-011-000 PRODUCTION - 4-1 5-1 7-1 6-1 X-PIN NUMBER DESIGNATION 4-2 5-2 7-2 6-2 PIN DESCRIPTION PART #: REV THIRD ANGLE PROJECTION mm / deg SIZE C SHEET 3 OF 4 SPECIAL CHARACTERISTICS REQUIRING CPK > 1.67 AND CON- TINUOUS STATISTICAL PROCESS CONTROL (SPC) MONITORING CRITICAL TO QUALITY WOLFSPEED CONFIDENTIAL 2D AND 3D CAD GEOMETRY AVAILABLE UPON REQUEST. DIMENSIONS AND TOLERANCES COMPLY WITH ASME Y14.5-2009. XM3 » Common TITLE POWER MODULE ASSEMBLY X-PIN CONFIGURATION SIGNIFICANT FEATURE, DIMENSION, OR CHARACTERISTIC WHICH MAY BE REFERRED TO BY THE ITEM NUMBER OR NOTE LETTER SIGNIFICANT FEATURE SHEET SCALE: 2:1 X X A A B B C C D D E E F F This document and the information contained within are the proprietary and confidential information of Wolfspeed, Inc. This document may not be copied, reproduced, or disclosed to any unauthorized person without prior written consent of Wolfspeed, Inc. 535 W. Research Center Fayetteville, AR 72701 (866) 924-3645 www.wolfspeed.com RELEASE STATUS: RELEASE DATE: 8APM-011-000 PRODUCTION - Zoom View of Signal Pinout

Rev. 2, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Supporting Links & Tools Evaluation Tools & Support

  • CAB320M17XM3 PLECS Model
  • KIT-CRD-CIL17N-XM: Dynamic Performance Evaluation Board for the XM3 Module
  • SpeedFit 2.0 Design Simulator™
  • Technical Support Forum Dual-Channel Gate Driver Board
  • CGD1700HB2P-XM3: Dual Channel Differential Isolated Half Bridge Gate Driver Board
  • Si828x Gate Driver Boards for Wolfspeed XM3 Modules
  • CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers Application Notes
  • XM Module Signal Pinout Clarification Guide
  • XM3 Mounting Guide
  • XM3 Thermal Interface Material Guide
  • PRD-06832: Design Options for Wolfspeed® Silicon Carbide MOSFET Gate Bias Power Supplies Package Dimensions (mm) EE F SECTION E-E 5.50 DETAIL F SCALE 4 : 1 Maximum Penetration Depth [mm] A A B B DO NOT SCALE DRAWING SHEET 1 OF 1 UNLESS OTHERWISE SPECIFIED: SCALE: 1:1 WEIGHT: REVDWG. NO. A SIZE TITLE: NAME DATE COMMENTS: Q.A. MFG APPR. ENG APPR. CHECKED DRAWN FINISH MATERIAL INTERPRET GEOMETRIC TOLERANCING PER: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL APPLICATION USED ONNEXT ASSY PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF <INSERT COMPANY NAME HERE>. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF <INSERT COMPANY NAME HERE> IS PROHIBITED.

Rev. 2, February 2023 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/power Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Cree. No communication from any employee or agent of Cree or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Cree. Notwithstanding any application-specific information, guidance, assistance, or support that Cree may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation for use in the applications identified in the next bullet point, and for the compliance of the buyers’ products, including those that incorporate this product, with all applicable legal, regulatory, and safety-related requirements. This product has not been designed or tested for use in, and is not intended for use in, applications in which failure of the product would reasonably be expected to cause death, personal injury, or property damage, including but not limited to equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment, aircraft navigation, communication, and control systems, aircraft power and propulsion systems, air traffic control systems, and equipment used in the planning, construction, maintenance, or operation of nuclear facilities. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Cree representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.