C9016-2X

C9546 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

LLeft: C9016-2x series + Controller, Center: C9546 series, Right: C9547 series HIGH-SPEED GATED IMAGE INTENSIFIER UNITS C9016-2x, C9546, C9547 SERIES OVERVIEW Image intensifiers (I. I.) are devices capable of intensifying an im- age at high gain and high-speed gating (electronic shutter opera- tion). This allows them to capture "instantaneous images" of ultra- fast phenomena that occur in extremely short periods of time. Ha- mamatsu C9016-2x, C9546 and C9547 series image intensifier units consist of a compact head that integrates an image intensifier with a high-speed gate operation circuit and a remote controller. Built-in image intensifiers are available with two standard photoca- thodes which are GaAsP photocathode and multialkali photoca- thode. The GaAsP photocathode is ideal for low-light-level imaging in the visible region such as for fluorescence observations. The multialkali photocathode on the other hand offers high sensitivity over a wider spectral response range from the UV through near IR region so observations can be made at various wavelengths. A high-speed shutter camera can easily be configured by simply connecting the image intensifier head to the front of a CCD cam- era. Various types of CCD cameras can be optically connected through a relay lens or by fiber coupling for highly efficient light transmission from the image intensifier. CCD cameras with fiber optic window are available as options. Image intensifier gain can be adjusted from the remote controller or a PC (personal computer) through USB interface (Ver. 1.1 compatible with Windows 2000 / XP). Built-in over-light protection circuit allows using these image intensifier units without having to worry much about the input light level.

FEATURES

C9016-2x Series: 20 ns ~ C9546 series: 3 ns ~ C9547-01/-02: 5 ns ~ C9547-03/-04: 10 ns ~ GGate Operation in Accordance with Input Gate Pulse Width and Its Repetition Rate GSuperior Shutter Ratio Even in UV region MCP gating: C9546, C9547 series GHigh Performance Image Intensifier High quantum efficiency: GaAsP model Wide spectral response: Multialkali model High resolution and High gain GBuilt-in Protective Circuit Prevents Damage from Excessive Light

APPLICATIONS

GAnalysis of High-speed Phenomenon Engine combustion state Plasma emission / Discharge / PIV / Flow / Spray and so on. GImaging of Low-light-level Emission and Fluorescence Time resolved fluorescence imaging for dyed cell/tissue

Controllable FunctionsProtective Functions SPECIFICATIONS NOTE: NOTE: * C9546 and C9547 series The LED on near of head can be turned out by control software. GThe control mode automatically switches to PC by connect- ing USB cable even if the remote controller is connected. Photocathode Sensitivity Photocathode Phosphor Screen Gain Equivalent Back- ground Input (EBI) Limiting Resolution (Typ.) Image Magnification Maximum Input Light Level E Average of Max. Phosphor Screen Brightness Power Requirement Power Consumption (Max.) Operating Ambient Temperature Storage Temperature Operating and Storage Humidity F Luminous Sensitivity (Typ.) Radiant Sensitivity A (Typ.) Quantum Efficiency A (Typ.) Effective Diameter Window Material Photocathode Material Spectral Response Peak Wavelength Window Material Phosphor Material D Decay Time Luminous Gain (Typ.) Radiant Emittance Gain A (Typ.) Luminous (Typ.) Radiant A (Typ.) Luminous (Typ.) Radiant A (Typ.) C9016-2x C9546 C9547 C9016-2x C9546 C9547 C9016-2x C9546 C9547 C9016-2x C9546 C9547 C9016-2x C9546 C9547 C9016-2x C9546 C9547 FOP P43 See Figure 8 100 to 240 4.8 0 to +40 -20 to +50 Below 70 700 214 192 B 25 C Borosilicate glass GaAsP 280 to 720 530 3 × 10-12 8 × 10-15 2.2 × 104 2.0 × 104 1.4 × 104 1.3 × 104 1.2 × 104 1.5 × 10-3 4.0 × 10-10 7.2 5.0 × 106 3.0 × 106 3.4 × 106 2.0 × 106 1.9 × 106 7.0 × 10-6 1.6 × 10-12 8.4 10.8 150 4.0 × 106 2.4 × 106 3.0 × 106 1.8 × 106 1.6 × 10-5 2.4 × 10-12 8.4 10.8 17.5 B 25 C Synthetic silica Multialkali 185 to 900 430 1 × 10-11 3 × 10-14 230 1.1 × 104 1.0 × 104 6.8 × 103 6.2 × 103 5.0 × 10-3 8.0 × 10-10 7.2 C9016-23 C9546-03 C9547-03 C9016-24 C9546-04 C9547-04 C9016-21 C9546-01 C9547-01 C9016-22 C9546-02 C9547-02 Parameter Type No. Unit µA/lm mA/W mm nm (lm/m 2)/lx (W/m2)/(W/m2) lm/cm2 W/cm2 Lp/mm lx W/cm2 cd/m2 V W Gain Setting Operation Mode Switching Excessive Light Protection Display Excessive Light Protection Reset Excessive Gate Input Monitor Integrated screen Current Monitor Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes No Remote Controller C9016-2x C9546G C9547 Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes PC (software) C9016-2x C9546G C9547 ParameterRepetition Rate Excessive Light Protection Protection Circuit Reset Max. Display Warning Shut off Red LED is lit continuously * Shuts off operation during excessive light Red LED flashes * (on rear of head and remote controller operation panel) Red LED is lit continuously * (on rear of head and remote controller operation panel) Reset switch on the remote controller or sending command via USB interface 2 kHz 30 kHz Parameter C9016-2x C9546 · C9547 NOTE: AAt wavelength of peak sensitivity BEffective output area is 12.8 mm × 9.6 mm. Take the effective area of the camera and reduction rate of the relay lens to be used into account. CEffective output area is 16 mm × 16 mm. Take the effective area of the camera and reduction rate of the relay lens to be used into account. DP-24 and P-46 phosphor screens are also available. EDuring normal (continuous) mode at maximum gain FNo condensation

Figure 1: C9016-2x Series Gate Time Input / Output Characteristics Figure 2: C9016-2x Series Time Sequence Figure 3: C9546 · C9547 Series Gate Time Input / Output Characteristics Figure 4: C9546 · C9547 Series Time Sequence Parameter C9016-2x C9546 Series C9547-01, -02 C9547-03, -04 Normal Mode Gate Mode Level Input Impedance Pulse Width A Repetition Rate B (Max) Gate off Time Gate Time A Gate Rise Time (Typ.) Gate Fall Time (Typ.) Delay Time Jitter (Max.) Output Level Pulse Width Output Impedance Continuous Mode Normally OFF, Turns ON when the gate signal is input 50 Ω 0.5 ns C-MOS Positive logic 20 ns to DC 2 kHz 20 ns to DC 15 ns 15 ns 46 ns ± 2 ns TTL Positive logic 8 ns to DC 30 kHz 10 kHz 20 µs Min. 5 ns to DC 3 ns 4 ns 36 ns ± 2 ns 86 ns ± 2 ns

2 V Positive logic (at 50 Ω termination)

Gate time (FWHM) 50 Ω 5 ns to DC 3 ns to DC 2 ns 3 ns 15 ns to DC 10 ns to DC 8 ns 10 ns when MCP is gated when MCP is gated Operation Mode Gate Signal Input Gate Output Gate Time Monitor NOTE: APlease refer to Figure 1 and Figure 3. BBuilt-in protection circuit 100 50 100 GATE TIME (ns) GATE INPUT PULSE WIDTH (ns) DELAY TIME: 46 ns ± 2 ns GATE INPUT PULSE WIDTH > 20 nsA B GATE TIME * (FWHM) NOTE: A: 4.4 V to 5 V (50 Ω) B: 3.5 V (50 Ω) * Gate time (FWHM) is the same as gate input pulse width. NORMALLY OFF GATE INPUT PULSE GATE OPERATION (I.I.) JITTER 0.5 ns (MAX.) DELAY TIME: Td 7 ns ± 1 ns GATE INPUT PULSE WIDTH: CA B GATE TIME (FWHM) NOTE: A: 2 V to 5 V (50 Ω) B: 2 V (50 Ω) C: See Figure 3 D: 2 V (50 Ω) Td: 36 ns ± 2 ns (when MCP is ungated) 86 ns ± 2 ns (when MCP is gated) MCP gate operation starts 26 ns prior to the rise edge of GATE OPERATION and ends 26 ns after the fall edge. GATE TIME (FWHM) D NORMALLY OFF GATE INPUT PULSE GATE OPERATION (I.I.) GATE TIME MONITOR JITTER 0.5 ns (MAX.) GATE TIME (ns) 1 100 10 100 1000 GATE INPUT PULSE WIDTH (ns) 1000 WHEN MCP IS UNGATED WHEN MCP IS GATED (10 kHz Max.) INPUT PULSE LEVEL: 2 V (at 50 Ω)

DIMENSIONAL OUTLINES (Unit: mm) FRONT VIEW SIDE VIEW BOTTOM VIEW REAR VIEW IMAGE INTENSIFIER UNIT 901 1124 34.5 0.5 83 33 50OUTPUT WINDOW 4-M3 OUTPUT WINDOW C-MOUNT (Weight: Approx. 570 g) 1/4"-20UNC 4-M3 CONNECTOR (AUX) FOR REMOTE CONTROLLER POWER SWITCH POWER/PROTECTION DISPLAY LED AC ADAPTER CONNECTOR USB CONNECTOR (Weight: Approx. 1 kg) 7713 2 66 50 4-M3 REAR VIEW BOTTOM VIEW SIDE VIEW 143 34.3 1 0.5 OUTPUT WINDOW C-MOUNT GATE TIME MONITOR OUTPUT (BNC) 1/4"-20UNC 4-M3 POWER/PROTECTION DISPLAY LEDPOWER SWITCH AC ADAPTER CONNECTORUSB CONNECTOR CONNECTOR (AUX) FOR REMOTE CONTROLLER GATE INPUT (BNC) POWER SWITCH GATE TIME MONITOR OUTPUT (BNC) POWER/PROTECTION DISPLAY LED AC ADAPTER CONNECTORUSB CONNECTOR CONNECTOR (AUX) FOR REMOTE CONTROLLER GATE INPUT (BNC) 7714 1 4-M3 REAR VIEW BOTTOM VIEW SIDE VIEW 159 33.3 0.5 1.8 OUTPUT WINDOW C-MOUNT 1/4"-20UNC 4-M3 (Weight: Approx. 1 kg)

C9016-2x series C9546, C9547 series GRemote Controller TAPPA0063EA Signal Systems Charge Accumulation Effective Image Area (H × V) Number of Pixels (H × V) Resolution (Horizontal) Power Requirement Power Consumption Operating Ambient Temperature Storage Temperature Operating and Storage Humidity* Weight NOTE: * No condensation Frame storage / Field storage, switchable 12.8 × 9.6 +9.0 to +16.0 1.6 0 to +40 -20 to +50 Below 70 170 EIA 768 × 494 570 CCIR 752 × 582 560 C9018-01C9018Parameter Unit mm TV lines V W g GC9018, C9018-01 CCD cameras with fiber optic window The C9018 series CCD cameras have a restart/reset function and are designed to read out images from C9016 and C9546 series image intensifier units. Fiber coupling allows more highly efficient image readout than lens coupling. The C9018 series cannot be used with C9547 series image intensifier units. SPECIFICATIONS DIMENSIONAL OUTLINE (Unit: mm) REMOTE CONTROLLER TOP VIEW 111 SIDE VIEW 2000 REAR VIEW (Weight: Approx. 300 g) POWER/PROTECTION DISPLAY LED RESET SWITCH OPERATION MODE SELECTOR SWITCH NORMAL/GATE GAIN ADJUSTMENT KNOB GATE INPUT (BNC) CONNECTION CABLE TO HEAD REMOTE CONTROLLER (Weight: Approx. 300 g) TOP VIEW 111 SIDE VIEW 2000 REAR VIEW GAIN ADJUSTMENT KNOB POWER/PROTECTION DISPLAY LED RESET SWITCH OPERATION MODE SELECTOR SWITCH NORMAL/GATE CONNECTION CABLE TO HEAD ACCESSORIES (SOLD SEPARATELY) 66 1 EFFECTIVE AREA 12.8 × 9.6 32 33 47.5 ± 0.56 DIP SWITCH 4- 3.2 GAIN SWITCH HD/VD SWITCH REAR VIEWFRONT VIEW SIDE VIEW 75 Ω TERMINATER SWITCH DC IN/SYNC CONNECTOR (12 PIN) INPUT WINDOW FOP VIDEO OUT/DC IN/SYNC 75Ω HD/VD M GAIN MIN MAX

SETUP EXAMPLE WITH OPTICAL ACCESSORIES IEEE1394 EIA-644 (VDS) Camera Link IMAGE INTENSIFIER UNIT REMOTE CONTROLLER Operation Gain Control Connection DC/Gate DC Gate Remote Controller PC PC 1 2 3 1 2 4 5 1 2 3 4 5 2: 1 RELAY LENS A2098 DIGITAL CCD CAMERA CCD CAMERA WITH FIBER OPTIC WINDOW C9018, -01 AC ADAPTER CAMERA CABLE A5963 SERIES POWER SUPPL Y PC5 (USB) AC100 V to 240 V 3: 2 RELAY LENS A5309 CCD CAMERA (1/2 INCHES) RELAY LENS ADAPTER A9017 VIDEO OUTPUT (EIA, CCIR) HEAD C9016-2x SERIES AC CABLE2 AC ADAPTER1 REMOTE CONTROLLER3 USB CABLE 5 m4 CD-ROM CONTROL SOFTWARE GATE INPUT AC100 V to 240 V IMAGE INTENSIFIER UNIT (C9016-2x SERIES) ACCESSORIES (SOLD SEPARATEL Y) MICROSCOPE C-MOUNT ATTACHMENT FOR MICROSCOPE OBJECTIVE LENS WITH C-MOUNT CONNECTING ITEMS The recommended connecting items are follows. It dependson on the operation mode and the gain control method.

JUL. 2005 IP Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2005 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. TAPPC0121EA GC9546, C9547 Series IEEE1394 EIA-644 (VDS) Camera Link REMOTE CONTROLLER Operation Gain Control Connection DC/Gate DC/Gate Remote Controller PC 1 2 3 1 2 4 5 2: 1 RELAY LENS A2098 DIGITAL CCD CAMERA CCD CAMERA WITH FIBER OPTIC WINDOW C9018, -01 AC ADAPTER CAMERA CABLE A5963 SERIES POWER SUPPL Y PC5 (USB) AC100 V to 240 V 3: 2 RELAY LENS A5309 CCD CAMERA (1/2 INCHES) RELAY LENS ADAPTER A9017 A9549 VIDEO OUTPUT (EIA, CCIR) HEAD C9546, C9547 SERIES AC CABLE2 AC ADAPTER1 DELAY PULSE GENERATOR REMOTE CONTROLLER3 OSCILLOSCOPE (GATE TIME MONITOR) USB CABLE 5 m4 CD-ROM CONTROL SOFTWARE AC100 V to 240 V TRIGGER INPUTGATE INPUT IMAGE INTENSIFIER UNIT (C9546, C9547 SERIES) ACCESSORIES (SOLD SEPARATEL Y) MICROSCOPE C-MOUNT ATTACHMENT FOR MICROSCOPE OBJECTIVE LENS WITH C-MOUNT CONNECTING ITEMS The recommended connecting items are as follows. It dependson on the gain con- trol method. HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E -mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it WEB SITE www.hamamatsu.com