C8799

C8799 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Data processing unit for NMOS linear image sensor Data processing unit with USB interface Features Applications /K6C Built-in 12-bit A/D converter /K6C Adjustable data rate (5 MHz Max.) /K6C Internal memory: 1 mega-word /K6C Interface of computer: USB 1.1 /K6C Simultaneous measurements using multiple units /K6C Spectrophotometry /K6C Position measurement C8799 is a data processing unit that converts video signals from an NMOS image sensor driver circuit into digital signals and transfers them to a PC. The USB interface allows easy connection to a PC for high-speed data communications at 12 Mbps. I Absolute maximum ratings (Ta=25 °C) Parameter Symbol Value Unit Digital power supply V D +7 V Analog power supply VA ±18 V Operating temperature Topr 0 to +50 * 1 °C Storage temperature Tstg 0 to +60 *1 °C *1: No condensation I Specifications Parameter Remark Specification +5 V * 2 +5 V, 200 mA +15 V * 2 +15 V, 150 mASupply voltage -15 V -15 V, 0 mA (for image sensor driver circuit supply) Video input signal *3 0 to 10 V Control output signal (START) * 4 Positive logic Synchronized output signal (CLK) *5 16 MHz, 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz, 62.5 kHz A/D resolution 12 bit Data rate *6 5 MHz (Max.) Internal memory 1 mega-word Interface of computer USB 1.1 Compatible OS * 7 Windows 98, Windows 2000, Windows XP *2: Tentative data *3: C8799-01 compatible with 0 to 5 V supply is also available. *4: Pulse width and interval are adjustable. *5: Setting is selectable. *6: Data rate equals the CLK frequency divided by the number of CLK pulses generated in an NMOS driver circuit for forming pixels. *7: Correct operation on OS (operating system) has been verified, but please note that operation has not been verified on all PC models.

Data processing unit for NMOS linear image sensor C8799 I Timing chart (external trigger setting) KACCC0176EA When EXT. TRIG is input while GATE is at High level, data is enabled from the next scan. Data collection timing by external one-shot trigger (when enabled with falling edge) The M-IN-START setting (T2) is ignored when this mode is selected. But T1 stays enabled. Integration time depends on TX. Data collection timing by external continuous trigger input (when enabled with falling edge) * Internal signal EFFECTIVE DATA EFFECTIVE DATA DATA COLLECTION START KEY INPUT EXT. TRIG M-IN-START * GATE * DATA START EXT. TRIG M-IN-START * DATA START TX T2 T2 Connector for multichannel detector head: D-sub 15 pin socket CLK START TRIGGER +5 VEOS VIDEO OSC. TRIG EXT. TRIG MONITOR +5 V +5 V OFFSET PGA GAIN SETTING +5 V +15 V -15 V +5 V +15 V -15 V D0 to D11 RD MEMORY

1 MEGA-WORD

CONNECTOR FOR POWER SUPPL Y: HR10A-10R-10S CONTROLLER TIME BASE DATA PROCESSING UNIT C8799 PGA

12 BIT ADC

5 MHz SAMPLING

Data processing unit for NMOS linear image sensor C8799 CONNECTOR FOR POWER SUPPLY: HR10A-10R-10S CONNECTOR: EPL00250 130 121 I/F CONNECTOR FOR MULTICHANNEL DETECTOR HEAD: D-sub 15 PIN SOCKET TYPE USB CONNECTOR I Dimensional outline (unit: mm) KACCA0114EA I Timing chart (accumulation setting) KACCC0177EA EXT. TRIG M-IN-START * M-IN-START * CLK OSC. TRIG START

1 CLK width

(synchronized with CLK pulse rising edge) * Internal signal Ts (=T2) Output in synchronization with rising edgeOutput in synchronization with falling edge

Data processing unit for NMOS linear image sensor C8799 HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K. Cat. No. KACC1078E02 Nov. 2002 DN4 10 9 12345678 9101112131415 KACCC0069EA I Pin connection of “SIGNAL I/O” connector KACCC0178EA Pin No. Terminal name I/O Content

1 NC No connection

2 VIDEO I Video signal

3 +15 V O +15 V supply line 4 -15 V O -15 V supply line 5 +5 V O +5 V supply line

6 START O MCD reset signal

7 CLK O MCD synchronization signal

8 EOS I Sensor end-of-scan signal

9 A. GND Analog ground 10 A. GND Analog ground

11 NC No connection

12 D. GND Digital ground 13 D. GND Digital ground 14 D. GND Digital ground

15 TRIGGER I A/D conversion timing

Pin No. Terminal name I/O Content 1 +15 V I +15 V supply line 2 A. GND Analog ground 3 -15 V I -15 V supply line for MCD 4 A. GND Analog ground 5 +5 V I +5 V supply line 6 D. GND Digital ground 7 +5 V I +5 V supply line for MCD 8 D. GND Digital ground

9 NC No connection

10 NC No connection

Note) MCD: Multichannel Detector Head <Connector for multichannel detector head I/F> (15-pin D-sub connector) <Supply connector> R-circle type connector Made by HIROSE: HR10A-10R-10S I Connection example for data processing unit (C8799) to peripheral units KACCC0184ED CABLE FOR IMAGE SENSOR (CONNECTORIZED AT BOTH ENDS) A3017 A3017-01 A3017-02 (0.5 m) (1 m) (1.5 m) SIGNAL CABLE A3020 (1.5 m, 2 CABLES) (CONNECTORIZED AT BOTH ENDS) OSCILLOSCOPE DATA PROCESSING UNIT C8799 USB CABLE (1.5 m) C8799 ACCESSORY IBM PC/AT COMPATIBLE COMPUTER C8892 HAMAMATSU