C7883

C7883 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

/K6C High-speed operation (compared to C7884) /K6C Compact (compared to conventional type C4069) /K6C Single power supply (+12 V or +15 V) operation IMAGE SENSOR Driver circuit for NMOS linear image sensor High-speed driver circuit for current-output type NMOS linear image sensor C7883 series C7883 I Selection guide Type No. Product name Feature C7883 Driver circuit High-speed driver circuit for current-output type NMOS linear image sensors. Has no input/output connector. C7883G Driver circuit + Pulse generator A dedicated pulse generator is pre-mounted on the driver circuit board. Has no input/output connector. C7883-20 Multichannel detector head C7883 driver circuit board is installed in a shield case. Note) 1: Standard input/output connector is FAP-16-07#2 (made by Yamaichi, sold separately). Equivalent connectors are available from other manufacturers. 2: Custom products with an input/output connector pre-mounted are available on request. Please consult our sales office. 3: When ordering along with a dedicated cable (A8226), C7883 series will be shipped with a mating connector pre-mounted. 4: We welcome custom requests (e.g. 4 MHz high-speed type). Feel free to contact our sales office. 5: When high precision measurements are required, refer to C7884 series data sheet. 6: When using voltage-output type NMOS linear image sensors, refer to C7885 series data sheet. I Specifications (Ta=25 °C) Parameter Symbol Condition Min. Typ. Max. Unit Supply voltage +Vs+11.5 +12.0 +15.5 V C7883 +12 V - 30 40 mA C7883G +12 V - 60 80 mACurrent consumption C7883-20 +Is +12 V - 30 40 mA Operation frequency - Master clock frequency: 8 MHz - - 2 MHz Gain G - 24 - kV/A Operating temperature Topr 0 to +50 * °C Storage temperature Tstg -10 to +60 * °C * No condensation

Driver circuit for NMOS linear image sensor C7883 series Terminal No. Terminal name Description 1 A. GND Analog ground 2 +12 V or +15 V Power supply 3 A. GND Analog ground

4 NC No connection

5 A. GND Analog ground

6 Data Video Analog video signal output; positive polarity

7 A. GND Analog ground 8 A. GND Analog ground 9 D. GND Digital ground

10 EOS Digital output signal indicating end of scan; negative logic

11 D. GND Digital ground

12 Trigger Digital output signal for A/D conversion; positive logic

13 D. GND Digital ground

14 CLK Digital input signal for operating the circuit at the rising edge (in case of

C7883G, output signal) 15 D. GND Digital ground

16 Start

Digital input signal for initializing the circuit; positive logic. (in case of C7883G, output signal) Interval of these pulses equals the integration time of the sensor. MASTER CLOCK CLK MASTER START Start START st CLOCK 1 CLOCK 2 Trigger VIDEO OUTPUT Data Video END OF SCAN EOS KACCC0118EA I Timing chart I Dimensional outlines and input/output signal descriptions (unit: mm) 21 6 11 5 55.88 7.62 7.62 7.62 63.5 15.24 25.4 40.64 (4 ×) C3 (2 ×) 3.6 KACCA0085EA 55.88 7.62 63.5 1.6 10.0 1.6 15.2 25.4(2 ×) 3.6 (4 ×) C3 7.62 7.62 KACCA0105EA C7883 C7883G

Driver circuit for NMOS linear image sensor C7883 series Terminal No. Terminal name Description

1 NC No connection

2 Data video Analog video signal output; positive polarity

3 +12 V (+15 V) Positive power supply

5 NC No connection

6 Start Digital input signal for initializing the current; positive logic

7 CLK Digital input signal for operating the circuit at the rising edge

8 EOS Digital output signal indicating end of scan; negative logic

9 A. GND Analog ground 10 A. GND Analog ground

11 Shield Case shield

12 D. GND Digital ground 13 D. GND Digital ground 14 D. GND Digital ground

15 Trigger Digital output signal for A/D conversion; positive logic

75.0 (2 ×) M3 EFFECTIVE LENGTH 10 45.0 25.0 D-SUB 15 PIN SOCKET TYPE 46.0 75.0 14.0 65.0 90PCD (4 ×) 3.5 PIERCE (8 ×) R3 (4 ×) C7 KACCA0112EA KACCC0069EA I Pin assignment of “Signal I/O” connector (C7883-20, 15 pin D-sub socket type) 12345678 9101112131415

HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K. Cat. No. KACC1074E01 Apr. 2002 DN Dedicated cable A8226 Connector on board: UFS-16B-01 Input/output signal connector: BNC (Start, CLK, Trigger, EOS, Data Video) Power supply: lose wire cable Cable length: 1 m Note) When making a simple in-circuit evaluation of NMOS linear image sensors without any troublesome soldering, use C7883G, C7884G, C7884G-01 or G7885G in combination with A8226. All you have to do is just insert an NMOS linear image sensor into the socket and connect the cables to an oscilloscope, power supply and AD converter. Note that NMOS linear image sensors are sold separately. Dedicated cable A8226 C7884G used in combination with A8226