C7180 HAMAMATSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

/K6C Designed for back-thinned CCD area image sensor *1 C7180: for non-cooled type (S7170-0909) C7181: for TE-cooled type (S7171-0909) /K6C Choice of line binning operation*2/area scanning operation /K6C Built-in driver circuit /K6C Highly stable temperature controller (C7181) Cooling temperature: fixed at Ts= -10 ± 0.05 ˚C (Ta=10 to 35 ˚C) /K6C Operates with simple input signals /K6C High UV sensitivity and high quantum efficiency /K6C Compact configuration

Applications

/K6C Scientific measurement instrument /K6C Semiconductor inspection /K6C UV imaging /K6C Biophoton observation IMAGE SENSOR CCD multichannel detector head Detector head for back-thinned CCD area image sensor C7180, C7181 I Selection guide The table below shows CCD area image sensors applicable for C7180, C7181. Since C7180, C7181 do not include a CCD area image sensor, so select the desired sensor and order it separately. CCD area image sensor Type No. Type No. Cooling Number of pixels Number of active pixels Active area [mm (H) × mm (V)] C7180 S7170-0909 Non-cooled 532 × 520 512 × 512 12.288 × 12.288 C7181 S7171-0909 One-stage TE-cooled 532 × 520 512 × 512 12.288 × 12.288 Note) Multichannel detector head C7182 designed for 512 × 512 pixel, two-stage TE-cooled CCD area image sensor (S7172-0909) is also available. *1: In normal CCD image sensors that receive light from the front surface, the active area is covered with transparent electrod es for charge transfer. These electrodes cut off UV radiation incident on the image sensor and also reduce the quantum efficiency. In contrast, back-thinned CCD image sensors have a unique structure in which the back of the active area is finely ground to allow light to enter from the back surface. This structure ensures high UV sensitivity and quantum efficiency because incident light need not pass through the transparent electrodes. *2: The FFT-CCD was originally designed as a two-dimensional image sensor. However, it can be operated like a linear image sensor having a large active area by transferring all the pixel signals in the vertical direction to the horizontal register (this is referred to as line binning).

CCD multichannel detector head C7180, C7181 HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2003 Hamamatsu Photonics K.K. Cat. No. KACC1068E03 May 2003 DN I Dimensional outlines (unit: mm) I Block diagram (C7181) KACCC0158EA I Specifications (C7181)

  • External input signal : HCMOS; clock signal, scan setting signal
  • External control signal: HCMOS; gain switching, cooling ON/OFF
  • Analog signal : video signal (0 to +10 V), cooling temperature display voltage (0 to 1.5 V)
  • Power supply : +5 V , +/-15 V , +12 V , +24 V LED TH.H P+ P- TH+ TEMPERATURE CONTROLLER * TIMING GENERATOR D. GND A. GND CLK Start Trigger EOS TE-COOLER VDD CCD AREA IMAGE SENSOR S7171-0909 BUFFER LOW PASS FILTER Data Video PREAMP DRIVER REGULATOR VEE CLAMP OD RD, ISV, ISH OG IG1H, IG2H IG1V, IG2V P1V, P2V, TG P1H, P2H SG RG SS OS TH- Mode Select Vp (+5V) P. GND VD2 (+5V) D. GND VF (+12V) F. GND Temp Monitor INVERTER Cooling Control VD1 (+5V) VA1+ (+15V) VA1- (-15V) VA2 (+24V) * C7180 does not include the temperature controller and TE-cooler. 100.0 90.0 77.0 FOCAL PLANE 34.0 35.0 80.0 60.0 82.0 62.0 11.0 50.0 50.0 (4 ×) M3 DEPTH 4 FOCAL PLANE 2.9 0.5 TE Cooler I/O Signal I/O 100.0 90.0 34.0 80.0 60.0 82.0 62.0 11.0 50.0 50.0 (4 ×) M3 DEPTH 4 FOCAL PLANE Signal I/O FOCAL PLANE 2.7 0.5 0.3 KACCA0107EB KACCA0108EC C7181 C7180