C5331-01

C5331 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

/K6C APD evaluation /K6C Spatial light transmission /K6C Bar code readers /K6C Laser radars /K6C Optical rangefinders /K6C Optical communications MODULE APD module Operates an APD with single 5 V supply C5331 series /K6C Choice of high sensitivity APDs A total of 11 types are available, including 6 types of 800 nm band APDs with active areas from φ0.2 to φ5 mm, 3 types of short-wavelength APDs with active areas from φ1 to φ5 mm, and FC connector types. /K6C High sensitivity detection board optimized for APD evaluation An APD and high-speed current-to-voltage amplifier circuit are mounted on a compact board. The high-speed current-to-voltage amplifier circuit features a low-noise configuration ideal for the APD signal readout and operates at high speeds yet with high sensitivity. /K6C Easy handling Single 5 V supply operation /K6C Built-in temperature-compensated bias voltage circuit Controls the bias voltage with a thermosensor to keep the APD gain constant. Gain is stabilized to as low as ±2.5 % Typ. at ambient temperatures of 25 ±10 ˚C. Ripple noise usually inherent to high voltage power supplies is also minimized. /K6C Compact and lightweight The circuit board is no larger than business card size, and weighs only 52 g. /K6C Low price /K6C Custom devices available with different dimensions and specifications I Selection guide Type No. Active area (mm) Frequency bandwidth -3 dB (Hz) Type of APD Peak sensitivity wavelength (nm) C5331 C5331-30 *1 φ1.5 C5331-01 C5331-31 *2 φ0.2 C5331-02 φ0.5 C5331-03 φ1.0 4 k to 100 M C5331-04 φ3.0 4 k to 80 M C5331-05 φ5.0 4 k to 50 M Standard type 800 C5331-11 φ1.0 4 k to 100 M C5331-12 φ3.0 4 k to 40 M C5331-13 φ5.0 4 k to 20 M Short-wavelength type 620 *1: C5331 + FC connector *2: C5331-01 + FC connector with lens (compatible with GI 50/125 fiber) Note: Gain is preset to 30 prior to shipping. HIGH VOLTAGE GENERATOR +200 V +5 V +5 V BNC CONNECTOR TEMPERATURE MONITOR APD HIGH-SPEED CURRENT-TO-VOLTAGE CIRCUIT VOLTAGE CONTROLLER KACCC0013EA IIIII Block diagram

I General ratings / Absolute maximum ratings Absolute maximum ratings Supply voltage Current consumption Active area Board dimension Output impedance Weight Supply voltage Maxi mum Incident light level Operating temperature Topr Storage temperature Tstg Type No. (mm) (V) (V) (V) (mA) (mA) (mm) (Ω ) (g) (V) (mW) (°C) (°C) C5331 C5331-30 φ1.5 C5331-01 C5331-31 φ0.2 C5331-02 φ0.5 C5331-03 φ1.0 C5331-04 φ3.0 C5331-05 φ5.0 C5331-11 φ1.0 C5331-12 φ3.0 C5331-13 φ5.0 +4.75 +5 +5.25 +50 +80 80 × 50 × 23 50 52 +7 10 0 to +60 -20 to +70 I Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=5 V, unless otherwise noted) Photoelectric converter section (APD) Photo sensitivity S Temperature stability of gain *3 25 °C ± 10 °C, Gain=30 Spectral response range λ Peak sensitivity wavelength λp λ=800 nm, Gain=1 λ=620 nm, Gain=1 Typ. Max. Type No. (nm) (nm) (A/W) (A/W) (%) (%) C5331 C5331-30 C5331-01 C5331-31 C5331-02 C5331-03 C5331-04 C5331-05 400 to 1000 800 0.5 - C5331-11 C5331-12 C5331-13 200 to 1000 620 - 0.42 ±2.5 ±5 High-speed amplifier section Cut-off frequency -3 dB NEP High band Low band λ=800 nm λ=620 nm Feedback resistance Photoelectric sensitivity *3 including APD, gain=30 Type No. Min. (MHz) Typ. (MHz) Min. (kHz) Typ. (kHz) Typ. (pW/Hz1/2) Max. (pW/Hz1/2) Typ. (pW/Hz1/2) Max. (pW/Hz1/2) (kΩ ) Min. (104V/W) Typ. (104V/W) Max. (104V/W) C5331 - - C5331-01 - - C5331-13 10 20 3 4 *3: Gain is preset to 30 prior to shipping.

WAVELENGTH (nm) (Typ. Ta=25 ˚C, λ=650 nm, M=30 *) PHOTO SENSITIVITY (A/W) 600400200 800 1000 * Measured at a reverse voltage giving a gain of 30. Incident light is 650 nm. STANDARD TYPE SHORT-WAVELENGTH TYPE -30 10 20 30 40 50 60 AMBIENT TEMPERATURE (˚C) GAIN VARIATION (%) -20 -10 (M=30) TYP. FREQUENCY PHOTO SENSITIVITY (V/W) 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz102 103 104 105 (Typ. Ta=25 ˚C, λ=λp) C5331-01/-02/-31 C5331-03 C5331/-30 C5331-04 C5331-11 C5331-12 C5331-13 C5331-05 IIIII Spectral response IIIII Gain temperature characteristic IIIII Frequency response IIIII Response to stepped light input (C5331-03) KACCB0020EB KACCB0021EB KAPDB0051EA Ta=25 °C, gain M=30, input pulse width=20 µs X-axis: 10 ns/div., Y-axis: 10 mV/div.

HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. APD module C5331 series Cat. No. KACC1007E05 Sept. 2007 DN a b Type No. ab cd d c e (2 ×) M3 19.6 11.6 3.7 9.0 Tolerance unless otherwise noted: ±0.2 C5331 C5331-01 C5331-02 C5331-03 C5331-04 C5331-05 C5331-11 C5331-12 C5331-13 8.2 ± 0.1 4.7 ± 0.1 4.7 ± 0.1 4.7 ± 0.1 8.1 ± 0.1 12.35 ± 0.1 4.7 ± 0.1 8.1 ± 0.1 12.35 ± 0.1 POWER SUPPLY CONNECTOR (WITH CABLE) (MOLEX 5484-02A) 1 ... +5 V 2 ... GND SHIELD CASE PHOTOSENSITIVE SURFACE 2.5 45.0 (4 ×) 3.2 e 20 35 6.2 16 25 40 8.6 20 20 35 6.2 16 25 40 8.6 20 4.0 BNC CONNECTOR FOR SIGNAL OUTPUT KACCA0013EC IIIII Dimensional outlines (unit: mm) (1) A high voltage power supply is used in this product. Do not remove insulating material potted on the board to prevent possible danger. (2) Be sure to terminate the output with 50 Ω when using this product. KACCA0093 E 20.0 35.0 16.0 6.2 M8 × 0.75 (2 ×) M3 19.6 11.6 3.7 9.0 Tolerance unless otherwise noted: ±0.2 POWER SUPPLY CONNECTOR (WITH CABLE) (MOLEX 5484-02A) 1 ... +5 V 2 ... GND SHIELD CASE 2.5 8.0 45.0 (4 ×) 3.2 4.0 FC CONNECTOR PHOTOSENSITIVE SURFACE BNC CONNECTOR FOR SIGNAL OUTPUT C5331-31 KACCA0094EA KACCA0093EA I Attachment adapters for FC and SMA connectors APD module FC adapter SMA adapter C5331-01 A8407-18 A8424-18 C5331-02 A8407-18 A8424-18 C5331-03 A8407-18 A8424-18 C5331-04 A8407-05A A8424-05A C5331-05 A8407-08 - C5331-11 A8407-18 A8424-18 C5331-12 A8407-05A A8424-05A C5331-13 A8407-08 - C5460 A8407-05 A8424-05 C5460-01 A8407-05A A8424-05A KACCA0094EA 31, unit: mm) 20.0 35.0 16.0 6.2 (2 ×) M3 19.6 11.6 3.7 9.0 Tolerance unless otherwise noted: ±0.2 Compatible with GI 50/125 fiber POWER SUPPLY CONNECTOR (WITH CABLE) (MOLEX 5484-02A) 1 ... +5 V 2 ... GND SHIELD CASE 10.0 45.0 4.0 M8 × 0.75 FC TYPE OPTICAL FIBER CONNECTOR WITH BUILT-IN LENS (4 ×) 3.2 BNC CONNECTOR FOR SIGNAL OUTPUT