C4D15120D WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • 1.2-KVolt Schottky Rectifier
  • Zero Reverse Recovery Current
  • High-Frequency Operation
  • Temperature-Independent Switching Behavior
  • Positive Temperature Coefficient on VF Benefits
  • Replace Bipolar with Unipolar Rectifiers
  • Essentially No Switching Losses
  • Higher Efficiency
  • Reduction of Heat Sink Requirements
  • Parallel Devices Without Thermal Runaway

Applications

  • Switch Mode Power Supplies (SMPS)
  • Boost diodes in PFC or DC/DC stages
  • Free Wheeling Diodes in Inverter stages
  • AC/DC converters Package TO-247-3 Maximum Ratings (TC=25°C unless otherwise specified) Symbol Parameter Value Test Conditions Note VRRM Repetitive Peak Reverse Voltage 1200 V VRSM Surge Peak Reverse Voltage 1300 V VDC DC Blocking Voltage 1200 V IF Continuous Forward Current (Per Leg/Device) 24.5/49 7.5/15 A TC=25˚C TC=135˚C TC=157˚C Fig. 3 IFRM Repetitive Peak Forward Surge Current 38* 25* A TC=25˚C, tP=10 ms, Half Sine Pulse TC-110˚C, tP=10 ms, Half Sine Pulse IFSM Non-Repetitive Peak Forward Surge Current 66* 49.5* A TC=25˚C, tP=10 ms, Half Sine Pulse TC=110˚C, tP=10 ms, Half Sine Pulse Fig. 8 IF,Max Non-Repetitive Peak Forward Current 600* 480* A TC=25˚C, tP=10 ms, Pulse TC=110˚C, tP=10 ms, Pulse Fig. 8 Ptot Power Dissipation(Per Leg/Device) 135/270 58.5/117 W TC=25˚C TC=110˚C Fig. 4 dV/dt Diode dV/dt ruggedness 200 V/ns VR=0-960V ∫i2dt i2t value 20.5* 12.25* A2s TC=25˚C, tP=10 ms TC=110˚C, tP=10 ms TJ, Tstg Operating Junction and Storage Temperature -55 to +175 ˚C TO-247 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw * Per Leg, Per Device Part Number Package Marking C4D15120D TO-247-3 C4D15120 VRRM = 1200 V IF (TC=135˚C) = 24 A Qc = 74 nC**

3 V IF = 8 A TJ=25°C

Note:This is a majority carrier diode, so there is no reverse recovery charge. Figure 1. Forward Characteristics Figure 2. Reverse Characteristics

C4D15120D Rev. D, 12-2017 Package Dimensions Package TO-247-3 NOTE ; 1. ALL METAL SURFACES: TIN PLATED,EXCEPT AREA OF CUT 2. DIMENSIONING & TOLERANCEING CONFIRM TO ASME Y14.5M-1994. 3. ALL DIMENSIONS ARE IN MILLIMETERS. ANGLES ARE IN DEGREES. 4. THIS DRAWING WILL MEET ALL DIMENSIONS REQUIREMENT OF JEDEC outlines TO-247 AD. 1 - GATE 2 - DRAIN (COLLECTOR) 3 - SOURCE (EMITTER) 4 - DRAIN (COLLECTOR) TITLE: SHEET COMPANY ASE Weihai

1 OF 3

Engineering Weihai, Inc. PACKAGE OUTLINE ISSUE DATE DWG NO. 98WHP03165A O Sep.05, 2016 TO-247 3LD, Only For Cree Recommended Solder Pad Layout TO-247-3 POS Inches Millimeters Min Max Min Max A .190 .205 4.83 5.21 A1 .090 .100 2.29 2.54 A2 .075 .085 1.91 2.16 b .042 .052 1.07 1.33 b1 .075 .095 1.91 2.41 b3 .113 .133 2.87 3.38 c .022 .027 0.55 0.68 D .819 .831 20.80 21.10 D1 .640 .695 16.25 17.65 D2 .037 .049 0.95 1.25 E .620 .635 15.75 16.13 E1 .516 .557 13.10 14.15 E2 .145 .201 3.68 5.10 E3 .039 .075 1.00 1.90 E4 .487 .529 12.38 13.43 e .214 BSC 5.44 BSC L .780 .800 19.81 20.32 L1 .161 .173 4.10 4.40 N 3 ØP .138 .144 3.51 3.65 Q .216 .236 5.49 6.00 S .238 .248 6.04 6.30 T 17.5° REF W 3.5° REF X 4° REF e all units are in inches Note: Recommended soldering profiles can be found in the applications note here: http://www.wolfspeed.com/power_app_notes/soldering Part Number Package Marking C4D15120D TO-247-3 C4D15120

C4D15120D Rev. D, 12-2017 Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power

  • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the thresh- old limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Ecology section of our website at http://www.wolfspeed.com/power/tools-and-support/product-ecology.
  • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree represen- tative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
  • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Notes
  • Cree SiC Schottky diode portfolio: http://www.wolfspeed.com/Power/Products#SiCSchottkyDiodes
  • Schottky diode Spice models: http://www.wolfspeed.com/power/tools-and-support/DIODE-model-request2
  • SiC MOSFET and diode reference designs: http://go.pardot.com/l/101562/2015-07-31/349i Related Links Diode Model VT RT Diode Model CSD04060 Vf T = VT + If*RT VfT = VT+If*RT Note: Tj = Diode Junction Temperature In Degrees Celsius, valid from 25°C to 175°C