C3M0075120J2

C3M0075120J2 WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 13

Technical content

Features

• 3rd generation SiC MOSFET technology
• Optimized package with separate driver source pin
• Larger drain tab for better thermal performance
• High blocking voltage with low on-resistance
• High-speed switching with low capacitances
• Fast intrinsic diode with low reverse recovery (Qrr)
• Halogen free, RoHS compliant Benefits
• Reduce switching losses and minimize gate ringing
• Higher system efficiency
• Reduce cooling requirements
• Increase power density
• Increase system switching frequency Typical Applications
• Motor Control
• EV Battery Chargers
• High Voltage DC/DC Converters Package Tab Drain 1 2 3 4 5 6 7 Part Number Package Marking C3M0075120J2 TO-263-7XL C3M0075120J2 Drain (TAB) Power Source (Pin 3,4,5,6,7) Driver Source (Pin 2) Gate (Pin 1) C3M0075120J2 Silicon Carbide Power MOSFET N-Channel Enhancement Mode Key Parameters Parameter Symbol Min. Typ. Max Unit Conditions Note Drain - Source Voltage VDS 1200 V TC = 25°C Maximum Gate - Source Voltage VGS(max) -8 +19 Transient Operational Gate-Source Voltage VGS op -4/15 Static Note 1 DC Continuous Drain Current ID A VGS = 15 V, TC = 25 °C, TJ ≤175 °C Fig. 19 Note 225 VGS = 15 V, TC = 100 °C, TJ ≤175 °C Pulsed Drain Current IDM 123 tPmax limited by Tjmax VGS = 15V, TC = 25 °C Fig. 22 Power Dissipation PD 172 W TC = 25˚C, TJ = 175 °C Fig. 20 Operating Junction and Storage Temperature TJ, Tstg -55 to +175 °C Solder Temperature TL 260 According to JEDEC J-STD-020 Note (1): Recommended turn-on gate voltage is 15V with ±5% regulation tolerance, see Application Note PRD-04814 for additional details Note (2): Verified by design

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0075120J2 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Rev. 2, December 2024 Electrical Characteristics (TC = 25˚C unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Test Conditions Note V(BR)DSS Drain-Source Breakdown Voltage 1200 V VGS = 0 V, ID = 100 μA VGS(th) Gate Threshold Voltage 1.8 2.6 3.8 V VDS = VGS, ID = 5 mA Fig. 11

2.1 V VDS = VGS, ID = 5 mA, TJ = 175ºC

IDSS Zero Gate Voltage Drain Current 1 50 μA VDS = 1200 V, VGS = 0 V IGSS Gate-Source Leakage Current 10 250 nA VGS = 15 V, VDS = 0 V RDS(on) Drain-Source On-State Resistance 75 97.5 mΩ VGS = 15 V, ID = 17.9 A Fig. 4, 5, 6135 VGS = 15 V, ID = 17.9 A, TJ = 175ºC gfs Transconductance S VDS= 20 V, IDS= 17.9 A Fig. 7 10.5 VDS= 20 V, IDS= 17.9 A, TJ = 175ºC Ciss Input Capacitance 1480 pF VGS = 0 V, VDS = 0V to 1000 V f = 1MHz VAC = 25 mV VDS= 1000 V, f = 1 MHz Fig. 17, 18Coss Output Capacitance 58 Crss Reverse Transfer Capacitance 2.7 Eoss Coss Stored Energy 32 μJ Fig. 16 Co(er) Effective Output Capacitance (Energy Related) 67 pF VGS = 0 V, VDS = 0 to 800V Note: 3 Co(tr) Effective Output Capacitance (Time Related) 96 pF EON Turn-On Switching Energy (Body Diode FWD) 267 μJ VDS= 800 V, VGS= -4 V/15 V, ID= 17.9 A, RG(ext) = 2.5 Ω, L= 158 μH, TJ = 175ºC FWD = Internal Body Diode Fig. 26, 28EOFF Turn-Off Switching Energy (Body Diode FWD) 117 td(on) Turn-On Delay Time 7 ns VDD = 800 V, VGS = -4 V/15 V, ID = 17.9 A, RG(ext) = 2.5 Ω, L= 158 μH, TJ = 175ºC Timing relative to VDS Inductive load Fig. 27, tr Rise Time 17 td(off) Turn-Off Delay Time 32 tf Fall Time 11 RG(int) Internal Gate Resistance 9 Ω f = 1 MHz, VAC = 25 mV Qgs Gate to Source Charge 19 nC VDS = 800 V, VGS = -4 V/15 V ID = 17.9 A Per IEC60747-8-4 pg 21 Fig. 12Qgd Gate to Drain Charge 13 Qg Total Gate Charge 52 Note (3): Co(er), a lumped capacitance that gives same stored energy as Coss while Vds is rising from 0 to 800V Co(tr), a lumped capacitance that gives same charging time as Coss while Vds is rising from 0 to 800V

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0075120J2 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Rev. 2, December 2024 Reverse Diode Characteristics (TC = 25˚C unless otherwise specified) Symbol Parameter Typ. Max. Unit Test Conditions Note VSD Diode Forward Voltage 4.8 V VGS = -4 V, ISD = 9 A, TJ = 25 °C Fig. 8, 9, 104.2 V VGS = -4 V, ISD = 9 A, TJ = 175 °C IS Continuous Diode Forward Current 28 A VGS = -4 V, TC = 25˚C ISM Diode pulse Current 123 A VGS = -4 V, pulse width tP limited by Tjmax trr Reverse Recover time 12 ns VGS = -4 V, ISD = 17.9 A, VR = 800 V diF/dt = 6813 A/µs, TJ = 25 °CQrr Reverse Recovery Charge 116 nC Irrm Peak Reverse Recovery Current 23 A trr Reverse Recover time 17 ns VGS = -4 V, ISD = 17.9 A, VR = 800 V diF/dt = 1610 A/µs, TJ = 25 °CQrr Reverse Recovery Charge 87 nC Irrm Peak Reverse Recovery Current 11 A Thermal Characteristics Symbol Parameter Typ. Unit Test Conditions Note RθJC Thermal Resistance from Junction to Case 0.67 °C/W Fig. 21

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 29. Clamped Inductive Switching

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0075120J2 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Rev. 2, December 2024 Package Dimensions E H1 D 1.60 H (4.63) b 15° e 1 2 3 4 5 6 7 A c L θ D1 D2 NOTE ALL METAL SURFACES ARE TIN PLATED (MATTE), EXCEPT 1. AREA OF CUT. DIMENSIONING & TOLERANCING CONFORM TO ASME 2. Y14.5M-1994. ALL DIMENSIONS ARE LISTED IN MILLIMETERS. ANGLES 3. ARE IN DEGREES. PACKAGE BURR FLASH SIZE (0.5 mm) IS NOT INCLUDED IN 4. THE DIMENSIONS

1 GATE

2 KELVIN

8 DRAIN

SYMBOL MIN (mm) MAX (mm) A 4.30 4.70 A1 0.00 0.25 A2 2.20 2.60 b 0.52 0.72 b1 0.60 0.80 c 0.42 0.62 c1 1.07 1.47 D 9.05 9.45 D1 7.58 7.98 D2 2.05 2.45 E 9.80 10.20 E1 6.30 6.97 E2 7.80 8.20 e 1.27 BSC H 14.87 15.27 H1 4.55 4.95 L 2.48 2.88 L1 0.87 1.27 θ 0 8 θ1 4 10 θ2 0 6 TITLE: REVISION NO. SCALE:1:1 SHEET 1 OF 1 A4Date: 03/17/23 01 PACKAGE OUTLINE DRAWING: TO-263-7L (J2) A A B B C C D D E E F F

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0075120J2 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Rev. 2, December 2024 Recommended Solder Pad Layout All dimensions in mm

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0075120J2 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Rev. 2, December 2024

Revision history

Document Version Date of release Descriptiion of changes

1 February 2024 Initial release

2 December 2024 Legal Disclaimer Updated

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0075120J2 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Rev. 2, December 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAUL TS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety-related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed. com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.