C3M0032120K1

C3M0032120K1 WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 13

Technical content

Features

• Optimized package with separate driver source pin
• Lower profile TO-247-4 package body
• High blocking voltage with low on-resistance
• High-speed switching with low capacitances
• Fast intrinsic diode with low reverse recovery (Qrr)
• Halogen free, RoHS compliant Benefits
• Reduce switching losses and minimize gate ringing
• Higher system efficiency
• Reduce cooling requirements
• Increase power density
• Increase system switching frequency Typical Applications
• Motor Control
• EV Battery Chargers
• High Voltage DC/DC Converters
• Solar/ESS
• UPS
• Enterprise PSU Package Tab Drain 1 2 3 4 Part Number Package Marking C3M0032120K1 TO-247-4L LP C3M0032120K1 C3M0032120K1 Silicon Carbide Power MOSFET N-Channel Enhancement Mode Key Parameters Parameter Symbol Min. Typ. Max Unit Conditions Note Drain - Source Voltage VDS 1200 V TC = 25°C Maximum Gate - Source Voltage VGS(max) -8 +19 Transient Operational Gate-Source Voltage VGS op -4/15 Static Note 1 DC Continuous Drain Current ID A VGS = 15 V, TC = 25 °C, TJ ≤175 °C Fig. 19 Note 248 VGS = 15 V, TC = 100 °C, TJ ≤175 °C Pulsed Drain Current IDM 156 tPmax limited by Tjmax VGS = 15V, TC = 25 °C Fig. 22 Power Dissipation PD 278 W TC = 25˚C, TJ = 175 °C Fig. 20 Operating Junction and Storage Temperature TJ, Tstg -40 to +175 °C Solder Temperature TL 260 According to JEDEC J-STD-020 Mounting Torque MD 8.8 Nm lbf-in M3 or 6-32 screw Note (1): Recommended turn-on gate voltage is 15V with ±5% regulation tolerance, see Application Note PRD-04814 for additional details Note (2): Verified by design

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0032120K1 Rev. 2, October 2024 Electrical Characteristics (TC = 25˚C unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Test Conditions Note V(BR)DSS Drain-Source Breakdown Voltage 1200 V VGS = 0 V, ID = 100 μA VGS(th) Gate Threshold Voltage 1.8 2.9 3.8 V VDS = VGS, ID = 10.7 mA Fig. 11 2.4 V VDS = VGS, ID = 10.7 mA, TJ = 175ºC IDSS Zero Gate Voltage Drain Current 1 50 μA VDS = 1200 V, VGS = 0 V IGSS Gate-Source Leakage Current 10 250 nA VGS = 15 V, VDS = 0 V RDS(on) Drain-Source On-State Resistance 32 43 mΩ VGS = 15 V, ID = 38.9 A Fig. 4, 5, 655 VGS = 15 V, ID = 38.9 A, TJ = 175ºC gfs Transconductance S VDS= 20 V, IDS= 38.9 A Fig. 7 22 VDS= 20 V, IDS= 38.9 A, TJ = 175ºC Ciss Input Capacitance 3460 pF VGS = 0 V, VDS = 0V to 1000 V F = 100 kHz VAC = 25 mV Fig. 17, 18Coss Output Capacitance 126 Crss Reverse Transfer Capacitance 7 Eoss Coss Stored Energy 71 μJ Fig. 16 Co(er) Effective Output Capacitance (Energy Related) 158 pF VGS = 0 V, VDS = 0... 800V Note: 3 Co(tr) Effective Output Capacitance (Time Related) 242 pF EON Turn-On Switching Energy (External Diode) 387 μJ VDS= 800 V, VGS= -4 V/15 V, ID= 38.9 A, RG(ext) = 2.5 Ω, L= 99 μH, TJ = 175ºC FWD = External SiC DIODE Fig. 26, 28EOFF Turn Off Switching Energy (External Diode) 91 EON Turn-On Switching Energy (Body Diode FWD) 791 μJ VDS= 800 V, VGS= -4 V/15 V, ID= 38.9 A, RG(ext) = 2.5 Ω, L= 99 μH, TJ = 175ºC FWD = Internal Body Diode Fig. 26, 28EOFF Turn-Off Switching Energy (Body Diode FWD) 103 td(on) Turn-On Delay Time 16 ns VDD = 800 V, VGS = -4 V/15 V ID = 38.9 A, RG(ext) = 2.5 Ω, Timing relative to VDS Inductive load Fig. 27, tr Rise Time 19 td(off) Turn-Off Delay Time 24 tf Fall Time 8 RG(int) Internal Gate Resistance 1.9 Ω f = 1 MHz, VAC = 25 mV Qgs Gate to Source Charge 41 nC VDS = 800 V, VGS = -4 V/15 V ID = 38.9 A Per IEC60747-8-4 pg 21 Fig. 12Qgd Gate to Drain Charge 31 Qg Total Gate Charge 113 Note (3): Co(er), a lumped capacitance that gives same stored energy as Coss while Vds is rising from 0 to 800V Co(tr), a lumped capacitance that gives same charging time as Coss while Vds is rising from 0 to 800V

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0032120K1 Rev. 2, October 2024 Reverse Diode Characteristics (TC = 25˚C unless otherwise specified) Symbol Parameter Typ. Max. Unit Test Conditions Note VSD Diode Forward Voltage 4.9 V VGS = -4 V, ISD = 20 A, TJ = 25 °C Fig. 8, 9, 10

4.3 V VGS = -4 V, ISD = 20 A, TJ = 175 °C

IS Continuous Diode Forward Current 50 A VGS = -4 V, TC = 25˚C ISM Diode pulse Current 156 A VGS = -4 V, pulse width tP limited by Tjmax trr Reverse Recover time 20 ns VGS = -4 V, ISD = 38.9 A, VR = 800 V dif/dt = 7460 A/µs, TJ = 175 °CQrr Reverse Recovery Charge 894 nC Irrm Peak Reverse Recovery Current 75 A trr Reverse Recover time 37 ns VGS = -4 V, ISD = 38.9 A, VR = 800 V dif/dt = 1780 A/µs, TJ = 175 °CQrr Reverse Recovery Charge 680 nC Irrm Peak Reverse Recovery Current 28 A Thermal Characteristics Symbol Parameter Typ. Unit Test Conditions Note RθJC Thermal Resistance from Junction to Case 0.44 °C/W Fig. 21

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. Figure 29. Clamped Inductive Switching

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0032120K1 Rev. 2, October 2024 E E3 E2 D L b x 2 Q S A C A c W T W X B P D1 7.19 b1 x 2 b3 x 4 PACKAGE BURR LOCATION NOTE: ALL METAL SURFACES ARE TIN PLATED (MATTE), EXCEPT 1. AREA OF CUT. DIMENSIONING & TOLERANCING CONFORM TO ASME 2. Y14.5M-1994. ALL DIMENSIONS ARE LISTED IN MILLIMETERS. ANGLES 3. ARE IN DEGREES. BURR OR MOLD FLASH SIZE (0.5 mm) IS NOT INCLUDED IN 4. THE DIMENSIONS 1 2 3 4 e30.25 M B A M

0.64 M B M

1 DRAIN

2 SOURCE

3 DRIVER SOURCE

4 GATE

5 DRAIN

SYMBOL MIN (mm) MAX (mm) A 4.83 5.21 A1 2.22 2.6 A2 1.91 2.16 b 1.10 1.30 b1 0.65 0.79 b3 1.34 1.44 b5 0.74 1.14 c 0.55 0.68 D 20.76 21.14 D1 16.25 17.65 D2 2.95 3.35 E 15.75 16.13 E1 13.1 14.15 E2 3.68 5.10 E3 1.00 1.90 E4 12.38 13.43 E5 14.65 15.05 e1 5.08 BSC e2 2.79 BSC e3 2.54 BSC L 19.72 20.32 L1 3.87 4.47 P 3.51 3.65 Q 5.49 6.00 S 6.04 6.30 T 17.5 REF. W 3.5 REF. X 4 REF. TITLE: REVISION NO. PRD-05970 SHEET 1 OF 1 A4Date: 02/15/24 02 PACKAGE OUTLINE DRAWING: TO-247-4L LPA A B B C C D D E E F F SCALE:1:1 Package Dimensions

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0032120K1 Rev. 2, October 2024 Recommended Solder Pad Layout All dimensions in mm

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0032120K1 Rev. 2, October 2024

Revision history

Document Version Date of release Descriptiion of changes

1.0 April-2024 Initial datasheet

2.0 October - 2024 Legal Disclaimer

© 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed.com/powerC3M0032120K1 Rev. 2, October 2024 © 2024 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimer WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAUL TS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety-related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed. com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.